IQ Home GW-3E70009 User manual
Gateway Quick Start Guide
Contents
1 Overview 3
2 Basic setup 3
3 Configure MQTT settings 3
4 Configure MQTT subscribe settings 6
5 Configure scheduler 7
6 Configure WWAN configuration 8
7 Advanced configurations 9
7.1 IQRF IDE 9
7.2 Modify TR configuration of IQRF coordinator 11
©2022 IQHome Kft.
www.iqhome.org
2 / 19
Gateway Quick Start Guide
1 Overview
In this guide you will learn about the first steps on how to use IQ Home gateways.
#desc#
2 Basic setup
You can find video tutorials for at the following link:
https://www.youtube.com/playlist?list=PLN9Mt98EPzN30TyGCDs-M0s0zSJRZdNpY
3 Connect with IP address on LAN
The LinkIt! software can discover gateways in the same local network automatically. In case the
gateway is not in the same network with the computer running LinkIt! or have any IT infrastructure
restrictions the gateway can be added with its IP address.
Connecting to a gateway on LAN the following ports have to enabled:
● 1313 UDP
● 13013 TCP
1. Select LAN network
2. Click on the button
©2022 IQHome Kft.
www.iqhome.org
3 / 19
Gateway Quick Start Guide
3. Set the IP address of the gateway and click on ADD button
4. The new gateway should appear in the list of the gateways
4 Configure MQTT settings
1. At first connect to the gateway as describe in 2 Basic setup
2. Click on the Settings menu.
3. Modify MQTT Settings.
©2022 IQHome Kft.
www.iqhome.org
4 / 19
Gateway Quick Start Guide
4. To setup MQTT TLS settings Enable MQTT TLS in the configuration.
In case you need CA signed or self signed certificate can be uploaded by click on the
UPLOAD button.
5. Open or Drag and Drop certificate and/or key files in the Add New TLS Files popup window
and click on the UPLOAD button.
©2022 IQHome Kft.
www.iqhome.org
5 / 19
Gateway Quick Start Guide
5 Configure MQTT subscribe settings
The MQTT subscribe configuration can be done in the Files menu.
1. Click on the Settings menu.
2. Click on the MQTT Subscribe on the left sidebar.
3. Modify the configuration and click on the SAVE button in the toolbar.
The documentation of the subscribe configuration can be found in the Reference Manual on the IQ
Home website: https://www.iqhome.org/gateway-reference-manual
©2022 IQHome Kft.
www.iqhome.org
7 / 19
Gateway Quick Start Guide
6 Configure scheduler
To configuring the automatic gateway scheduler with the Scheduler Wizard please follow the video
tutorial:
https://www.youtube.com/watch?v=TztJF3jg__A&list=PLN9Mt98EPzN30TyGCDs-M0s0zSJRZdNpY
&index=5
7 Configure Ethernet interface
7.1 DHCP configuration
As a default configuration the gateway uses DHCP settings and can be selected in DHCP mode in
Ethernet settings.
7.2 Static/Fixed IP address
The gateway supports setting up a static IP address or as known as fixed IP address.
1. Click on the Settings tab
2. Click on the “Ethernet” tab on the left sidebar
3. Select Fixed option from the drop down menu and set IP properties
4. Save the configuration
©2022 IQHome Kft.
www.iqhome.org
8 / 19
Gateway Quick Start Guide
8 Configure WLAN interface
Power on the gateway and connect with LinkIt! and follow the instructions how to connect to the
gateway:
https://www.youtube.com/playlist?list=PLN9Mt98EPzN30TyGCDs-M0s0zSJRZdNpY
CAUTION!
The GW-IOT series gateways can connect to the LinkIt! via USB terminal or have to setup a
temporary hotspot for the predefined factory settings:
SSID: IQHome
PSK: iqhomesetup
8.1 Connect to WiFi hotspot
1. Click on the Settings menu in Link It!
2. Select WLAN settings
3. Select the preferred hotspot SSID and type the password (PSK) for the selected SSID.
If the SSID not appear on the list try to reload the settings
4. Save new settings
5. Upload new configuration settings
©2022 IQHome Kft.
www.iqhome.org
10 / 19
Gateway Quick Start Guide
9 Configure WWAN/LTE interface
The 4G/LTE capable gateways can be configured by Link It!.
7. Insert the SIM card into the slot of the gateway
8. Click on the Settings menu in Link It!
9. Click on the WWAN menu on the left sidebar
1. Modify the configuration
a. Set the APN of your service provider
b. Set PIN code or leave it blank if it is disabled in the SIm card
c. To further configuration enable Advanced mode in the header
2. Click on the SAVE button in the toolbar
3. Reboot the gateway to apply WWAN configuration
7. Confirm to reboot the gateway
©2022 IQHome Kft.
www.iqhome.org
12 / 19
Gateway Quick Start Guide
10 Advanced configurations
10.1 IQRF IDE
The configuration of the gateway’s IQRF coordinator and the IQRF network with IQRF IDE is
possible via the Link It! management tool. The IQRF IDE can connect to the gateways via Link It!. At
first you should connect to the gateway with Link It! Described in section 2.2. After that you can
connect to the IQRF coordinator with IQRF IDE as described in section 2.3.
System architecture of how can connect and configure IQ Home gateways
CAUTION!
The IQRF IDE can connect to the gateway only via the Link It! by default for security reasons!
For development and/or debugging you can enable in gateway configuration but it is not
recommended in production use!
Follow the few steps below to connect to the IQ Home Gateway:
1. Open the IQRF IDE, open a project and choose “IQRF Device Manager” from the “Tools”
menu or press F9
2. Select Add UDP device icon in “IQRF Device Manager” (or press Shift+Ctrl+D)
3. Select Mode: IQRF gateway
4. Click on the „Search” button
5. Select your gateway from the list. If the list still empty check your network settings
6. Click on the Add button
©2022 IQHome Kft.
www.iqhome.org
13 / 19
Gateway Quick Start Guide
9. In the bottom status bar of the Link It! now you can see the IQRF IDE status. If you
connected to a selected gateway the IQRF IDE Forwarding status should be Active.
10. Now you can use IQRF IDE to configure the IQRF coordinator and the IQRF network.
10.2 Modify TR configuration of IQRF coordinator
The TR configuration of IQRF coordinator module in the IQ Home gateways can be modified with
IQRF IDE.
1. Connect to the gateway in IQRF IDE as described in 2.3. IQRF IDE.
2. Open IQMESH Network Manager in Tools>QMESH Network Manager.
©2022 IQHome Kft.
www.iqhome.org
15 / 19
Gateway Quick Start Guide
6. Close the TR configuration window and reset the coordinator module by click on the Reset
TR button. The RX and TX LEDs on the gateway blinking after the TR reset.
Acknowledgement
This content was created with the support of the Ministry of Foreign Affairs and Trade of Hungary.
©2022 IQHome Kft.
www.iqhome.org
19 / 19
This manual suits for next models
1
Table of contents
Other IQ Home Gateway manuals
