IQCCTV IQC600D User manual

IQC600D
USER MANUAL
TECHNICAL SUPPORT:
For Technical Support please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 1 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and damage
caused by normal wear and tear. In the unlikely event that you encounter a
problem with this product, it should be returned to the place of purchase.
High Resolution
Mini Dome Camera, 650 TVL

1. DO NOT ATTEMPT TO DISASSEMBLE THE CAMERA
2. HANDLE THE CAMERA WITH CARE
3. DO NOT EXPOSE AN INDOOR CAMERA TO RAIN OR MOISTURE, OR TRY TO OPERATE IT
IN WET AREAS -Take immediate action if the camera becomes wet. Turn the power off
to the camera and contact a CCTV professional. Moisture can damage the camera and
also create a danger of electric shock.
4. DO NOT USE STRONG OR ABRASIVE DETERGENTS WHEN CLEANING THE CAMERA BODY.
5. NEVER POINT THE CAMERA TOWARD THE SUN - Whether the camera is used outdoors or
not, never point it towards the sun. Use caution when operating the camera in the vicinity
of spot lights and light reflecting objects.
6. DO NOT OPERATE THE CAMERA BEYOND ITS TEMPERATURE, HUMIDITY OR POWER
SOURCE RATINGS. -Do not use the camera in an extreme environment where high
temperature of high humidity exists. Use the camera under conditions where
temperatures are between 14℉to 122℉(-10℃to 50℃), and humidity is below 85%. For
the correct power supply, refer to the specification sheet.
Caution
2
Before you begin:
Please unpack the box carefully and identify that all the parts are present.
Make sure you use only the recommended power supply. Damage caused to
the camera by incorrect voltage or wiring is not covered by the warranty.
Do not cut the connectors of the camera cables, this will void your warranty.
Before operating this product, please read this instruction manual properly.

3
Installation
1. Select a suitable position on the wall or ceiling to
install the camera. Take the mounting bracket
(base) off the dome.
2. Rotate the upper casing of the camera, it will
unscrew from the dome base. Be careful when
handling the camera as the parts are not fixed to
the upper case or the camera ‘ball’.
3. Slightly drill the supplied 3 screws into the 3
round holes on the mounting bracket and rotate
the bracket clockwise until the screws are
wedged into the narrower chase. Tighten the
fixing screws to secure the mounting bracket on
to the wall or ceiling.
4. Using the Dome base as a guide, drill a hole in
the middle of the base circle on the wall or
ceiling where the camera is to be mounted, to
allow the power and video cable to be fed
through. Screw the Dome base to the wall or
ceiling using the Wall Plugs and screws supplied.
5. Feed the Camera’s cable through the hole and
adjust the Camera ‘ball’ so the camera is
positioned in the correct direction and at the
correct angle.
6. When the camera is in the correct position, put
the upper casing and dome base of the camera
back into position. Screw the upper casing back
onto the base to secure the camera in place.
7. Connect the power terminal of the camera to a
12V DC regulated power supply.
8. Connect the camera video output and the video
input on the control or viewing equipment with
RG59 (BNC) video signal cable.
12v DC Input
Power Cable
BNC
Video Cable
1 2
3

IQC600D
4
Specifications
Style: Dome Camera
Weather Resistant: No
IP Rating IP40
Operating Temperature: -10 to 50°C
Vandal Resistant: No
Mounting Type: Wall Or Ceiling
Dimension : 65 x 70mm (DxH)
Weight: 0.1 Kg
Warranty: 1 Year
Sensor Type: Xvision X650 - 1/3" Digital Imaging Sensor
DSP Type: Xvision XE
DSP Functions: Automatic Electronic Iris
Automatic White Balance
Automatic Gain Control
Resolution: 650 TVL
Minimum Illumination: 0.1 Lux
Night Vision: No
Lens Type: Fixed
Lens Size: 3.6mm
Viewing Angle: 78°
Operating Voltage: 12v DC
Power Consumption: 80mA
Video Output: BNC Socket
Audio Output: N/A
Power Input: DC Socket