iroda CT-610KB User manual

CT-610KB
PROFESSIONAL
BUTANE TORCH
With 3 Interchangeable Nozzles

• Readinstructionsbeforeuse.
• DONOTrell,ignite,orusenearopename,heater,furnace,or
combustiblematerials.
• KEEPAWAYFROMCHILDREN.
• Onlyusehigh-qualitybutanegas.
• BeawarethattheFlame Nozzleofthetorchcangetextremely
hotduringuse.
• Donottouchthenozzleduringuse,orbeforesucienttimehas
passedforcooling.
• Alwaysbesuretheunitiscoolbeforestoring.
• Storeproperlywhennotinuse.
• Keepinadryplace,outofthereachofchildren.
• DONOTexposetoheatabove120°F(50°C)andavoidprolonged
exposuretothesun.
• IfyourCT-610malfunctionsdonottrytorepair.Contactyour
dealeroronlinesupportforhelp. 3
IMPORTANT SAFETY INSTRUCTIONS
Warnings:
Interchangeable
Nozzle
OPEN/CLOSE
Regulator
OFF/HOLD
Hands-Free
Lock
GasCartridge
SafetyStand
Attachable
TabletopStand
LockingNut
SafetyLatch
Trigger
CT-6101PinPointFlameNozzle
CT-6103SwirlFlameNozzle
CT-6104HotBlower
DESCRIPTION

HOW TO USE THE CT-610
CONNECTING GAS CARTRIDGE TO TORCH
1. EnsurethattheOPEN/CLOSE Regulator
isturnedo(turnedfullyclockwise).
2. Placethetorchheadvalveontopofthe
Gas Cartridgevalve.(Fig.1)
3. GentlyscrewtheGas Cartridgeintothe
Torch Head.Becarefulnottocross-
threadtheTorchtotheCartridge.
• ConnectanddisconnecttheTorch HeadtotheGas Cartridge
whileoutdoorsorinawell-ventilatedarea.
• CAUTION: Screw on hand tight only. Do not over tighten or you
will damage the torch seals and gas cartridge seals.
Gas
Cartridge
Torch
Fig.1 Fig.2
REFILLING
• Useonlyhigh-qualitybutanegas.
• Rellinawell-ventilatedareaawayfromanyignition
sourceandotherpeople.
1. Holdbutanecanisterupsidedownwhenlling
(Fig.2)
2. Firmlypressnozzleofbutanefuelintothe
Filling Valve.
3.Stopllingwhengasoverows.(Gasoverow
duringrellingisnormalanddoesnotindicate
aleak.)
4.Waitforafewminutesbeforeuseforgasto
stabilize.
Butane
5

IGNITION
6
1. TurntheOPEN/CLOSE Regulator counterclockwiseapprox.
1/2turntostartthegasow.
2. PresstheSafety LatchandTriggertogethertoignitethetorch.
3.Forcontinuousame,slidetheHands-free LocktotheHOLD
position.ThenreleasetheSafety Latch andTrigger.
4.Toextinguishtheame,slidetheHand-frees LocktoOFF
positionandturntheControl Regulatorclockwisetotheclosed
positiontoturnothegas.
7
Fig.3
Fig.4
• You can use the Attachable Tabletop Stand for better stability
and multiple angles use during operation. (Fig. 4)
OPEN/CLOSE
Regulator
OFF/HOLD
Hands-Free
Lock
SafetyLatch
Trig ger
(Fig.3)

8 9
HOW TO CHANGE NOZZLE
1. Besurethenozzleiscoolbeforeremoval.
2. TurntheLocking Nut counterclockwisetounscrewandremove
theInterchangeable Nozzle.
3.InstallthedesirednozzleintothebodybyaligningtheProtrusion
ontheNozzlewiththeNotchintheTorch Body(Fig.5)
4.Carefullypushthenozzleintothebody(Fig.6).
5.Gentlyscrewthe Locking Nut onthethreads.Becarefulnotto
overtightenasitcoulddamagethenozzleassemblyandthreads
inthebody.
Fig.5
Fig.6
NotchinTorchBody
ProtrusiononNozzle

• Toreducetheriskofpersonalinjury,propertydamage,ordamage
toyourCT- 610,donotattempttorepairtheunitbody.
TROUBLE SHOOTING
PROBLEM PROBABLECAUSE HOWTOCORRECT
CannotPressdownon
theignition
Safetylatchnotfully
disengaged
SlidetheHands-Free
LocktoOFFposition
DoesnotIgnite/noame EmptyGascartridge Rellwithbutanefuel
• Thisproduct,whenusedforsolderingandsimilarapplications,produces
chemicalsknowntotheStateofCaliforniatocausecancerandbirth
defectsorotherreproductiveharm.
• DepartmentofTransportationHazardousMaterialsRegulationsforbidthe
carriageofbutaneorotherammablegasproductsonpassengeraircraft.
Donotpackthisitemoranyotherammablegasitem,inanycheckedor
carry-onbaggage.
SPECIAL WARNING
11
SPECIFICATIONS
Dimensions Length 198mm(7.8inches)
Height 218mm(8.6inches)
GripDiameter 50mm(2inches)
BaseDiameter 80mm(3.1inches)
Weight EmptyFuelTank 325g(11.5oz)
Fuel Butane
OperatingTime MidSetting 50min.
FlameTemp ≈2400°F(1300°C)BlueFlame
FlameLength MidSetting 2.5cm(1inch)

Thisappliancemaybelledwithanycartridgesmarked
“Butane”complyingwithEN417.
Warning:
-Useoutdoorsonlyoruseinwellventilatedareas.
-Readtheinstructionsbeforeusingtheappliance.
CAUTION:
-Accessiblepartsmaybeveryhot.Keepyoungchildren
awayfromtheappliance.
www.pro-iroda.com