ISCommunications U-Pointer User manual

User Manual & Quick Guide
Any kinds of displays become an interactive
whiteboard with U-Pointer
U-Pointer is an Interactive Whiteboard that adopts an image process
technology. It captures U-Pointer Pen’s movement on display and
analyzes the movement. With U-Pointer, any kinds of displays,
Projector, PDP, LCD, rear projection display and etc. becomes
an interactive whiteboard with high quality and easiness.

Table of contents
Shipping Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Connecting the U-Pointer to PC . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pen Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
- Exchanging the Pen Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configuration Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 7
- The U-Pointer Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 7
- Alignment View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
- Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Running the U-Pointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Shipping Contents
1. U-Pointer : Interactive Whiteboard Sensor.
2. Installation CD : CD contains U-Pointer driver, i-Pro software and user manual.
3. Quick manual : Short cut of how to use the U-Pointer.
4. U-Pointer Pen : U-Pointer Pen is a pen type wireless mouse. Before using the pen,
insert the batteries into the pen.
5. Mini USB Cable : Connects the U-Pointer to PC.
6. Batteries : AAA size batteries.
7. Extra Pen Tip : 5 extra pen tips for each pen.
Caution : When inserting the batteries into the U-Pointer Pen, make sure the battery polarities are correct.
Connecting the U-Pointer to PC
Use the USB cable* to connect the U-Pointer to PC.
Plug the USB mini-B end into the U-Pointer and plug the USB type-A end i nto PC.
ex) Projector
image

*. A USB cable of 5 meters is provided. Use a USB repeater cable If you need to extend the length.
Pen Action
The U-Pointer Pen provides the following 4 actions:
Click : Touch an icon or a menu on the screen.
Double Click : Touch an icon or a menu on the screen two times.
Right Button Click : Touch an icon or menu for at least 1.5 seconds.
Drag : Touch and drag an object on the screen.
Exchanging the Pen Tip
1. Removing the pen tip
Hold the pen tip with your fingers. Shake and pull the pen tip out of the pen.
1. Inserting the pen tip
Push the pen tip gently, but not abruptly.

Driver Installation
Insert the U-Pointer CD into your CD/DVD-ROM driver. The Installation assistant will run automatically.
Follow the instructions on the screen. If the assistant does not run automatically, double click on the
“setup.exe” under CD/DVD-ROM directory and the Installation assistant will display.
1. Click Install U-Pointer 2 in the installation assistant.
2. Select a language and click “OK”.
3. The installation dialog box will appear. Click next. During the installation process, it is
recommended to close other applications.

4. Click Install, the installation begins.
5. The installation ends and a dialog box will appear. Click “Finish.

After the installation is finished,
• The U-Pointer icon will be created on the desktop.
• The installation folder will be created on C: directory.
•When running the U-Pointer, the U-Pointer icon appears on the system tray area.
•Click on the U-Pointer icon on system tray area and a popup menu will appear.
When using the U-Pointer for the first time, the configuration window will appear on the desktop to
help you configure the U-Pointer.
Configuration Setting

The U-Pointer Configuration
To use the U-Pointer, the proper setting of the U-Pointer configuration is needed.
The Configuration setting window will help you to set up U-Pointer correctly.
1. U-Pointer configuration : Select the U-Pointer type you’re going to use.
2. U-Pointer Language : The default language is the same as the language for your operating system. If you want to
change the language, click on and then language list will display.
After selecting your preferred language, quit the U-Pointer and start the U-Pointer again.
3. U-Pointer Option :
•Program auto run : Click this item if you want the U-Pointer to run automatically when Windows starts.
•Ceiling Mount Mode : Click this item if you mount the projector on the ceiling.
When the projector is placed on the table, do not click this item.
•Rear Screen Mode : If the projector is installed on the rear screen system, click this item.
4. U-Pointer Update Server
1
3
2
4

Alignment View
The U-Pointer Alignment function is to set the orientation of the U-Pointer to the screen.
Alignment View : When clicking on the “Alignment View”, the screen image is displayed on the alignment view
as illustrated.

Calibration
U-Pointer provides two kinds of calibration methods : auto calibration and manual calibration.
Auto calibration* : click on and the calibration process will run automatically.