Iseki SSM48 User manual

SSM48
SSM60
SRM48
SSM54
SMM54
SRM54
MODELS:
FOR TXG237
[E4F]
ISEKI MOWER DECKS

ISEKI MOWER DECKS
1
Thank you very much for purchasing an ISEKI mower deck.
This operator’s manual provides the information necessary for operating and maintaining your mower deck safely
and properly. The contents are mainly composed of the following two items:
SAFETY INSTRUCTION: Essential items which you should observe while operating the mower deck.
TECHNICAL INSTRUCTION: Items which are necessary to operate, adjust, and service the mower deck
properly.
Every time you see the words and symbols shown below in the manual and on the safety decals, you must take
note of their instructions and warning.
DANGER: This symbol together with the words DANGER indicates an imminently hazardous situation
that, if not avoided, will result in VERY SERIOUS INJURY OR EVEN DEATH.
WARNING: This symbol together with the word WARNING indicates a potentially hazardous situation
that, if not avoided, could result in SERIOUS INJURY OR EVEN DEATH.
CAUTION: This symbol together with the word CAUTION is used to indicate a potentially hazardous
situation that, if not avoided, may result in MINOR INJURY.
IMPORTANT: The word IMPORTANT is used to provide instructions or advice in order to let the mower deck
provide the optimum performance.
NOTE: The word NOTE is used to indicate points of particular interest for more efficient and convenient repair
or operation.
Before starting to operate the lawn mower for the first time, you should read this operation manual as well as
TXG237 operation manual thoroughly and carefully until you are sufficiently familiar with the operation of the
lawn mower in order to do jobs safely and properly. You are advised to refer to it from time to time to refresh your
understanding of the lawn mower.
The manual should be kept in a handy place so you can refer to it when required.
The parts employed in this mower deck may be modified without notice for better performance and quality and
for safety purposes, which may lead to some inconsistency found on your mower deck with the contents of this
manual.
The lawn mower is designed to be used on well-kept lawns. Using the lawn mower in other places is not autho-
rized. Besides, the manufacturer will not pay for any damage caused by unauthorized use and the risk is only
borne by the user. Proper use of the lawn mower also implies that the user follows the operational, adjusting, and
servicing instructions indicated in the operation manual.
When you have any question about your mower deck, you are always welcome to ask your dealers.
All information, illustrations, and specifications contained in this manual are based on the latest information avail-
able at the time of publication. The right is reserved to make changes at any time without notice.
INTRODUCTION

SSM48, SSM54, SSM60 & SMM54, SRM48, SRM54
2
TO OUR CUSTMER................................................... 1
TABLE OF CONTENTS .............................................2
1. FOR SAFE OPERATION .......................................4
1. HOW TO BE A SAFE OPERATOR.....................4
2. BEFORE STARTING THE TRACTOR ...............5
3. OPERATION OF THE TRACTOR ......................7
4. OPERATION ON A SLOPE .............................. 10
5. MOUNTING AND DISMOUNTING OF THE
MOWER DRIVE SHAFT .................................. 11
●POSITION OF THE SAFETY LABELS ............15
SSM60-TXG23E4F ..........................................15
SSM54-TXG23E4F ..........................................16
SSM48-TXG23E4F ..........................................17
SMM54-TXG23E4F..........................................18
SRM54-TXG23E4F ..........................................19
SRM48-TXG23E4F ..........................................20
●MAINTENANCE OF THE SAFETY LABELS ...21
2. GENERAL INFORMATION.................................. 22
MODEL / SERIAL NUMBERS ..............................22
SSM60-TXG23E4F ..............................................23
SSM54-TXG23E4F ..............................................23
SSM48-TXG23E4F ..............................................23
SMM54-TXG23E4F..............................................23
SRM54-TXG23E4F ..............................................23
SRM48-TXG23E4F ..............................................23
3. SPECIFICATIONS................................................ 24
SSM60-TXG23E4F ..............................................24
SSM54-TXG23E4F ..............................................25
SMM54-TXG23E4F..............................................26
SRM54-TXG23E4F ..............................................27
SRM48-TXG23E4F ..............................................28
4. NAME OF MAJOR COMPONENTS .................... 29
SSM60-TXG23E4F ..............................................29
SSM54-TXG23E4F ..............................................30
SSM48-TXG23E4F ..............................................31
SMM54-TXG23E4F..............................................32
SRM54-TXG23E4F ..............................................33
SRM48-TXG23E4F ..............................................34
5. INSTALLATION ON THE TRACTOR...................35
INSTALLATION OF MOWER DECK .................... 35
ASSEMBLE THE PROTECTOR ONLY FOR
SRM54/48. ...........................................................37
6. MOWER OPERATION .........................................44
BEFORE OPERATION.........................................44
7. INSPECTION AND SERVICE OF EACH PART ..47
INSPECTION AND REPLACEMENT OF THE
GEAR BOX........................................................... 47
INSPECTION AND REPLACEMENT OF THE
DRIVE BELT.........................................................48
STOPPING THE MOWER....................................49
EMERGENCY STOP............................................49
EFFICIENT MOWING .......................................... 50
STARTING MOWING OPERATION .....................50
INSPECTION AND REPLACEMENT OF
VBELTS................................................................52
Belt Inspection..................................................53
Replacement of Belt.........................................53
INSPECTION AND REPLACEMENT OF
BLADES ...............................................................54
Blade Removal.................................................54
Kind of blades ..................................................55
INSPECTION OF GAUGE WHEELS ...................55
INSPECTION OF ROLLERS................................ 55
CLEANING UNDER THE BELT COVER..............55
8. LUBRICATION AND GREASING POINTS.......... 56
SSM60-TXG23E4F ..............................................56
SSM54-TXG23E4F ..............................................57
SSM48-TXG23E4F ..............................................58
SMM54-TXG23E4F..............................................59
SRM54-TXG23E4F ..............................................60
SRM48-TXG23E4F ..............................................61
9. DISASSEMBLY AND REASSEMBLY..................62
GEAR BOX........................................................... 62
BACKLASH ADJUSTMENT .................................62
SSM60/54/48, SMM54, SRM54/48 ......................63
10. STORING OF THE MOWER DECK...................64
11. TROUBLESHOOTING ....................................... 65
TABLE OF CONTENTS

ISEKI MOWER DECKS
3
12. PACKING PARTS LIST .....................................67
SSM60-TXG23E4F ..............................................67
SSM54-TXG23E4F ..............................................68
SSM48-TXG23E4F ..............................................69
SMM54-TXG23E4F..............................................70
SRM54-TXG23E4F ..............................................71
SRM48-TXG23E4F ..............................................72

SSM48, SSM54, SSM60 & SMM54, SRM48, SRM54
4
DANGER : Failure to observe the fol-
lowing safety instructions can result in
serious injury or death. As the owner or
operator of the tractor, you are respon-
sible for preventing accidents or injuries.
1. HOW TO BE A SAFE OPERATOR
1.1. Follow all the safety signs on the tractor and all
the manufacturer’s instructions before starting the
tractor. If you do not, it may result in body injuries.
1.2. Pay attention to the caution labels on the tractor
and mower deck and observe the instructions
they give to avoid physical injuries.
1.3. Ensure that all operators are responsible individu-
als who have read the instructions or been fully
trained on the safe operation of the tractor.
1.4. All operators should evaluate their health and
ability to operate a tractor safely enough to pro-
tect themselves and others from serious injury.
Do not operate the tractor while you are under the
influence of alcohol or drugs.
1.5. Understand how to properly and safely operate
and maintain the tractor. Seek and obtain practi-
cal instruction on how to operate and maintain the
tractor properly.
1.6. Be sure to use necessary protective devices such
as headgear, safety glasses, safety shoes, ear
plugs, gloves, etc.
1.7 Wear appropriate protective clothing and equip-
ment when you are operating, adjusting, or
servicing the tractor, such as safety glasses, long
pants, substantial footwear, and ear protection.
Long hair, loose clothing, or jewellery can get
tangled in moving parts.
1.8. Never permit the following persons to operate the
tractor:
- Persons not properly trained to operate the
tractor
- Persons who cannot understand the instruc-
tions mentioned in this operation manual and
on the caution labels
- Pregnant women
- Children
Local regulations may restrict the age of the
operator.
FOR SAFE OPERATION

FOR SAFE OPERATION
5
1.9. Inspect the tractor periodically. If not, this may
not only shorten the tractor’s service life but also
make safe and efficient operation impossible.
1.10. Never use the tractor out of normal usage even
if it is not mentioned at this operation manual.
2. BEFORE STARTING THE TRACTOR
2.1. Set up an operation plan with sufficient time al-
lowance. A tight plan may result in unexpected
accidents. Especially when operating the tractor
under extremely hot, cold, or humid circum-
stances, set up an operation schedule or method
which will ensure operational safety.
2.2. Mow only in daylight or good artificial light. Mow-
ing in the dark may cause unexpected accidents.
2.3. Thoroughly inspect the mowig area and remove
all objects from the mowing area that the tractor
can throw, such as stones, toys, sticks, and wires,
which may lead to serious accidents.
2.4 Ensure that there are no people or pets in the
area where you will mow. Keep children out of
the mowing area and under the watchful care of a
responsible adult.
2.5. Do not operate the tractor unless the operator’s
presence controls, safety switches, and guards
are attached and functioning properly.
2.6. Start the engine from the operating or designated
starting position.
2.7. Before starting the engine, make sure that ev-
erything is safe around the tractor and put the
traction drive in neutral, set parking brake, and
disengage the cutting unit(s). Otherwise, unex-
pected accidents may occur.
2.8. Start the engine with the starter switch only.
Never attempt to start the engine by shorting the
terminals, or the tractor may move abruptly, and
result in unexpected accidents.
2.9. Do not run the engine in an enclosed area where
dangerous carbon monoxide fumes can collect.
Sufficient ventilation shoud be provided when
starting the engine in an enclosed area.
2.10. Make sure of safety around the tractor and
move slowly when starting. Abrupt starting may
cause unexpected accidents.
2.11. Become familiar with the operation, particularly,
the stopping of the tractor. You should be skilful
enough to be able to stop the tractor at will.

SSM48, SSM54, SSM60 & SMM54, SRM48, SRM54
6
2.12. Use only attachments and accessories ap-
proved by the manufacturer and install and
operate them as directed.
2.13. When your tractor is equipped with an imple-
ment other than a standard mower deck, such
as a collector, a cabin, etc., never fail to ask
your dealers about machine balance. Always
follow their advice.
2.14. Keep in mind that the operator or user is re-
sponsible for the accidents or hazards caused
by the tractor to other people or their property.
2.15. Inspect the tractor for wear or damage. Re-
place any worn or damaged parts.
2.16. Especially before starting the Tractor, be sure
to perform advised pre-operation inspections
especially on the brakes and inspect visually
to see that the blade and blade tightening nuts
are not worn, damaged or loose. Replace worn
or damaged blade and nuts as an assembly
to preserve blade balance. Otherwise, poor
braking or scattered broken blades may result,
which is very dangerous.

FOR SAFE OPERATION
7
3. OPERATION OF THE TRACTOR
3.1. When the tractor is running, stay away from the
discharge opening, the cutting unit(s), and all
moving parts.
3.2. During operation, never allow anyone, especially
children, and animals to be in the vicinity of the
tractor. Do not direct the discharge at anyone.
3.3. When you are working with co-workers, be sure
to alert them by signalling before you take a
new action.
3.4. When operating the tractor, you should be seated
in the operator’s seat properly, hold the steering
wheel by both hands, and look in the direction
in which the tractor advances. Avoid looking a
side or holding the steering wheel by one hand
during operation.
3.5. Always be sure to operate the tractor from the
driver’s seat with seat belt. Never attempt to get
on or off the tractor while it is travelling.
3.6. Do not mow on wet grass. the tractor may slide.
3.7. Slow down before turning the tractor. Turning at
high speed may cause the tractor to turn over.
3.8. Never attempt to depress the dif-lock pedal while
turning around the tractor. Turning with the dif-
lock on may cause the tractor to turn over.
3.9. Connect the independent brake pedal except nec-
essary situation. Never operate the independen-
dent brake pedal during travelling as this will cause
the tractor to skid sideways or turn over. When
stopping, be sure to use the master brake pedal.
3.10. Look down and behind of you, and ensure
a clear path before you move the tractor
backward.
3.11. Do not mow while moving backward unless it is
absolutely necessary.
3.12. Never operate the tractor in terrain where there
are ditches, holes, or steps easy to collapse. In
such a place, the tractor could turn over or fall.
3.13. Before making access to moving parts, stop the
engine, and keep your hands, feet, clothing, ac-
cessories and etc. away so as not to be caught
in the moving parts of the tractor.
3.14. Be alert when you approach blind corners and
objects that may obscure your vision. Watch
for holes, ruts, or bumps. Tall grass can hide
obstacles.

SSM48, SSM54, SSM60 & SMM54, SRM48, SRM54
8
3.15. Never rest a foot on the brake pedal. If so, the
brake discs wear rapidly, which may lead to
serious accidents.
3.16. Travelling with using the cruise lever should
be restricted only to operations in specious,
flat areas with an unobstructed view and used
with the range shift lever always kept in the low
speed position.
3.17. Never attempt to do the mowing operation
without the discharge cover in place or with the
cover left open.
3.18. Never attempt to operate without the drive shaft
cover in place.
3.19. Do not attempt to adjust the cutting height while
the engine is running.
3.20. Adjust the cutting height with the gauge wheels
in accordance with the condition of the ground
surface at the working site. Mowing on rough
ground with low cutting height may cause
the blades to hit soil or stones, which is very
dangerous.
3.21. If you strike an object or if the tractor vibrates
abnormally, stop the tractor immediately, wait
for all moving parts to stop, and inspect the cut-
ting unit(s). Make all repairs before you resume
operation.
3.22. Be sure to keep the grass discharging part clean.
A clogged discharging part may cause the dis-
charge cover to open, resulting in scattering of
grass and stones, which is very dangerous.
3.23. Never allow grass or leaves to accumulate
around heated parts such as the engine and
the muffler, or this may cause a fire.
3.24. Before moving the tractor to another place, be
sure to stop the mower blades and lift up the
mower deck. Otherwise, they may hit stones and
scatter them around, which is very dangerous.

FOR SAFE OPERATION
9
3.25. When driving over a levee with tractor, stop the
mower blades, lift up the mower deck, and move
the tractor straight to the levee and make it climb
over slowly. Avoid climbing over a levee too high,
or the tractor may fall sideways or turn over.
3.26. Stop the cutting unit(s) when you are crossing
gravel areas.
3.27. Watch for traffic when you are operating the
tractor near a roadway or when crossing a
roadway.
3.28. Never attempt to use the tractor to draw an
implement or a trailer. It is not designed to draw
a load.
3.29. Stay alert and stop the tractor if people or pets
enter the area.
3.30. Do not carry passengers.
3.31. Never carry children, even when the cutting
means are not moving. Children may fall off
the tractor and become seriously injured or
prevent you from operating the tractor safely.
Children who have been given rides in the past
may suddenly appear in the mowing area for
another ride and be run over or backed over by
the tractor.
3.32. Before stopping the engine, be sure to lower
the mower deck onto the ground, apply the
parking brakes, shift the range shift lever in
neutral and turn the PTO switch to the OFF
position.
3.33. Before leaving the operating position of the
tractor for any reason, always do the following:
- Stop the tractor on level ground.
- Stop the cutting unit(s), disengage PTO, and
lower the attachment(s).
- Disengage the drive(s).
- Set the parking brake.
- Stop the engine and wait for all moving parts
to stop.