Isenberg THV.4511 User manual

www.isenbergfaucets.com
Ver. 2.54
BEFOREYOUBEGIN

•Youmustobservealllocalplumbinglawsandcodes.

•Donotinstallthisvalveifitdoesnotmeetlocalplumbingcodes.
•Shutoffthemainwatersupply.

InstallationManual-TVH.4511
3/4”VolumeControl
UseWithTrimsEndingin*4511

NOTICETOHOMEOWNER
• We recommendthatthisproductisinstalledbyaqualified 
professionalplumber.
•Pleasecheckthisproductimmediatelytoensurethatithas
notbeendamagedandiscomplete.Beforeinstallation,please
makesurethisproductisthecorrectmodelandyouhaveall
thepartsrequiredforinstallationanduse.
•Pleaseflushthewatersystemtoensurethatnometalswarf,
solder,andotherimpuritiescanentertheproduct.
•
Turnoffwatersupplybeforecommencingwork. 
•Pleasereadtheseinstructionscarefullyandretainforfuture
reference.
www.isenbergfaucets.com

TABLEOFCONTENTS
• OperatingSpecifications . . . . . . . 1
ValveInstallationAndTolerance
 Cut-OutDimensions . . . . . . . 1
RoughInSpecification . . . . . . 2
ConnectingTheWaterLines-&AccompanyingValves . . . 3
TrimMarkings/WaterOutput . . . . . . 4
FlushingTheValve/ReplacingVolumeCartridge . . . . 5
CartridgeMaintenance . . . . . . . 5
InstallingTheTrim . . . . . . . . 6
InstallingTheExtensionKit . . . . . . . 8

•
•
•
•

•
•
•
•
•


WATERTEMPERATURE
ThisvalvemeetsorexceedsANSIA112.18.1andASSE1016
ThisvalveiscertifiedbyIAPMO

WATERPRESSURE

Thisproductistobeusedwithawater
pressurerangeof15PSIto80PSIONLY

Ifwaterpressureisgreaterthan80PSI
installapressurereducingvalve(PRV)

Thisproductistobeusedwithwaterat
atemperaturerangeof40˚F-120˚F
ONLY!

www.isenbergfaucets.com
OPERATINGSPECIFICATIONS

CUTOUTDIMENSIONS
IsenbergʼsTVHSeriesvalvescomeswithablack
pre-attachedmud-guard.Thismud-guardisnot
toberemovedordiscarded.Itspurposeisto
guidetheinstallationprofessionalontheproper
cut-outdimensionsofthedrywall.
Wall Cut Out Dimensions
From Center Point of Valve:
TVH.4511
X = 42mm / 1.65”
Y = 42mm / 1.65”
X
Y
1

www.isenbergfaucets.com

ROUGHINSPECIFICATION
The distance between back of
the valve to the nished tile
surface should be between
2.77” and 3.44” inches.
Minimum = 70.5mm [2,77"]
Maximum = 87.5mm [3,44"]
2
Finished tile should fall
between Min & Max.
If valve is installed too deep
into the wall, extensions are
available.

www.isenbergfaucets.com
CONNECTINGTHEWATERLINES
ConnectRigidpipingtotheinput.Thiswillsupport
thevalve
LevelValve
3
INPUT OUTPUT
TheTVH.4511valvehasnotemperature
controlability.Inordertoachievetemper-
aturecontrolabilityitshouldbeusedin
combinationwithatemperaturecontrol
valvesuchastheIsenbergTVH.4201.
Theimageontheleftisforillustrative
purposesonlyandisbynomeanstheonly
connectionscenario.
ACCOMPANYINGVALVEUSAGE

FINISHEDTILEPOSITIONFINISHEDTILEPOSITION
www.isenbergfaucets.com
ON
InstallDrywallandTile.Ensurefinishedtile
surfaceisbetweentheminandmaxmarks
onthemidguards.
Thebelowdiagramshowsthemarkingson
thetrimplateandtheoutputsonthevalve.
Thiswillhelptheinstallationprofessional
toconnecttheappropriateaccessoriestothe
valveoutputports
4
TRIMMARKINGS/WATEROUTPUT

www.isenbergfaucets.com
FLUSHINGTHEVALVE/REPLACINGTHEVOLUMECARTRIDGE
Inordertocleardirtinthelines-youmustflush
thevalvebeforethewallisclosedandwateris
turnedonforthefirsttime.
1)Removecartridgebyturningwithaspanner
2)Turnonwatersupplyandletwaterflow
removinganydirtinthelines.
5
CARTRIDGECLEANING&MAINTENANCE
CARTRIDGECLEANING&MAINTENANCE
Volume Control Cartridge:
Check For Dirt

www.isenbergfaucets.com
INSTALLINGTHETRIM-TRIMPLATESIZEANDSHAPEMAYVARY-ILLUSTRATIONONLY
Removemudguards Inserttrimplate
Insertadaptorbaseandtighten
6
AlignTrimplatetillitisstraight
AlignTrimplatetillitisstraight

www.isenbergfaucets.com
INSTALLINGTHETRIM-TRIMPLATESIZEANDSHAPEMAYVARY-ILLUSTRATIONONLY
Insertcenteringknob&screws Inserthandle.Tightenhexscrew&insertcover
button.Makesurethediverterissettothe
“OFF”markingbeforeyourbegin
Thisphotoshowsacompletelyinstalledtrim
7

www.isenbergfaucets.com
INSTALLINGEXTENSIONSTOTHEVALVE-OPTIONAL
Installextensionkit-3Piecesasshownabove
8