Itel S32LTE User manual

USER MANUAL
MOBILE PHONE
MODEL：S32LTE
HEREBY, ITEL MOBILE LIMITED
DECLARES THAT THIS MOBILE PHONE IS IN
COMPLIANCE WITH THE ESSENTIAL
REQUIREMENTS AND OTHER RELEVANT
PROVISIONS OF DIRECTIVE 2014/53/EU.

1 TAKING CARE OF YOUR DEVICE
2 KNOW YOUR PHONE
3 SIM/SD CARD INSTALLATION
4 MAKE CALLS
5 MESSAGES
6 CAMERA
7 GALLERY
8 WIFI
9 MUSIC
10 FINGERPRINT
11 WARRANTY CONDITIONS
12 SAR
13 EWASTE、RECYCLE YOUR PHONE
14 BATTERY RECOMMENDATIONS
15 DISCLAIMERS
16 COPYRIGHTS
17 CAUTION
2
6
7
8
9
10
11
12
13
14
15
19
21
24
25
27
28
1

2
1 TAKING CARE OF YOUR DEVICE
Your device is a product of superior design and
artisanship and should be handled with care: The
following suggestions will help you protect your
phone :
Keep the device dry. Precipitation, humidity,
and all types of liquid or moisture can contain
minerals that will rust electronic circuits.If your
device gets wet and your device battery is
removable, please remove the battery and
refrain from turning on the device, wipe it with
dry cloth and take it to the service center. If
your device gets wet and your device battery
is un-removable, please don’t reboot your
device and take it to the service center.
Do not store the device in high or cold
temperature. High temperature can shorten
the life of electronic devices and damage
batteries.
Fully understand user manual before use

3
Do not drop, knock, or shake the device.
Rough handling can break internal circuit
boards and ne mechanics.
Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the device. Use a
soft, clean and dry cloth to clean the surface of
the device.
Battery& Chargers Safety:
Do not place the battery in re; follow local
laws and ordinances in disposing used battery.
Do not use or store the device in dusty or dirty
areas. Its moving parts and electronic
components may be damaged.
Do not attempt to open the device other than as
instructed in this guide. Repairing of phone by
yourself and others than our authorized service
agent/center is against the warranty rules.
Do not expose your phone to extreme
temperatures lower than 0°C and higher than
45°C.
S32LTE Phone does not support SD card hot
swap please do not unplug the SD card during
power on.

4
Check the model number of the charger
before using it to charge the mobile.
There are risks of explosion if battery is
replaced by anon-original one.
Dispose of used batteries according to the
instructions.
CAUTION!
Only use original battery, charger and
accessories applicable to the specic mobile
model. Using other types of battery, charger
and accessories may violate the certication or
warranty terms of the equipment and may
result in danger.
Return waste and used batteries to the
supplier or specied recovery site.
Stop charging when battery is higher than 55℃,
and restore charging when below 50℃.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
*Notes:

If you want to know more:
www.itel-mobile.com
www.facebook.com/itelmobile
Twitter.com/itel_mobile
If your device battery is removable, you can
keep pressing the power button for 10 seconds
to restart the phone. If your device battery is
un-removable，you can reset the battery to
restart the phone.
5

2 KNOW YOUR PHONE
1. Earphone plug
3. Light proximity sensor
5. Receiver
7. USB port
9. Flash
11. Power button
2. Front ash
4. Microphone
6. Front camera
8. Rear camera
10. Volume button
12. Speaker
6
1. Earphone plug
3. Front Flash
5. USB port
7. Volume button
9. Rear camera
11. Fingerprint
2. Receiver
4. Front camera
6. Speaker
8. Power button
10. Flash

3 SIM/SD CARD INSTALLATION
1. Power o mobile.
2. Refer to the following picture for SIM / SD card
installation.
7

4 MAKE CALLS
On dial interface and enter a complete phone
number to make a call.
8
100%
100%

5 MESSAGES
You can use Messages to exchange text and
multimedia messages with your friends. You can
select SIM 1 or SIM 2 to send messages.
9
100%

6 CAMERA
Photos and videos will be stored in the phone
storage by default, you can copy pictures and
videos from the phone storage to the SD card or
PC and vice versa.
10

7 GALLERY
You use gallery to view pictures that you have
taken with Camera, downloaded, or copied onto
your SD card, you can also view pictures in a
Picasa web album. You can also share your
pictures with friends.
11

8 WI-FI
To browse the web, you need switch on Data
connection.
If there is Wi-Fi around, you can switch on Wi-Fi to
use it browse the web. Some may need password.
12

9 MUSIC
When you copy music to your SD card, the Music
player searches the card for music les and builds
a catalog of your music, based on information
about each le that is stored in the le itself.
13

14
10 FINGERPRINT
Fingerprint application instructions
Use a ngerprint to unlock the screen or to
encrypt your important data and privacy
information.
Add ngerprint or delete Fingerprints
1.You can enter Settings application, click
Security and select ngerprint to add
ngerprints. You can also click on the
Fingerprint application icon directly to add
ngerprints.
Note：
1.You need to choose your backup screen lock
method before adding Fingerprint.
2.You can click the ngerprint in Fingerprint
list and then choose to delete it.
You want to know more ngerprint features，
you can enter Fingerprint application and then
operate other feature according to the related
instruction of Fingerprint application.

15
11 WARRANTY CONDITIONS
The warranty period starts at the time of product's
original purchase by the rst end-user. The
product may consist of several dierent parts and
dierent parts may be covered by a dierent
warranty.
This Limited Warranty does not cover user
manuals or any third party software, settings,
content, data or links included or downloaded
in the product, whether included during
installment, assembly, shipping or any other
time in the delivery chain or otherwise and in
any way acquired by you. Itel does not warrant
that any Itel software will meet your
requirements, will work in combination with
any hardware or software provided by a third
party, that the operation of any software will be
uninterrupted or error free or that any defects in
the software are correctable or will be
corrected.
What is not covered?
1.

16
This Limited Warranty does not cover
(a) Normal wear and tear (including, without
limitation, wear and tear of camera lenses,
batteries, or displays)
(b) Defects caused by rough handing (including,
without limitation, defects caused by sharp
objects, by bending, compressing or
dropping,etc.)
(c) Defects or damage caused by misuse of the
Product, including use that is contrary to the
instructions provided by itel (e.g. as set out
in the Product's user guide).
(d) Transport costs.
(e) Other acts beyond the reasonable control of
itel.
2.
The Limited Warranty does not cover defects or
alleged defects caused by the fact that the
product was used with, or connected to, any
product, accessory, software and/or service not
manufactured, or supplied, by itel or was used
otherwise than for its intended use. Defects can
be caused by viruses from your or a third party's
unauthorized access to services, other accounts,
3.

17
This Limited Warranty does not cover defects
caused by the fact that the battery has been
short-circuited or by the fact that the seals of
the battery enclosure or the cells are broken or
show evidence of tampering or by the fact that
the battery has been used in equipment other
than those for which it has been specied.
4.
This Limited Warranty is not enforceable if the
Product is opened, modied or repaired by
anyone other than an authorized service centre,
if it is repaired using unauthorized spare parts
or if the Product's serial number, the mobile
accessory date code or the IMEI number has
been removed, erased, defaced, altered or are
illegible in any way and this shall be determined
in the sole discretion of itel.
5.
computer systems or networks. This unautho-
rized access can take place through hacking,
password mining or through a variety of other
means.

This Limited Warranty is not enforceable if the
Product has been exposed to moisture, to
dampness or to extreme thermal or environ-
mental conditions or to rapid changes in such
conditions, to corrosion, to oxidation, to spillage
of food or liquid or to inuence from chemical
products.
6.
18

12 SAR
19
Specic Absorption Rate (SAR) Certication
THIS DEVICE MEETS INTERNATIONAL GUIDELINES
FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for
exposure to radio waves (radio frequency
electromagnetic elds) recommended by
international guidelines. The guidelines were
developed by an independent scientic
organization (ICNIRP) and include a substantial
safety margin designed to assure the safety of all
persons, regardless of age and health.
The radio wave exposure guidelines use a unit of
measurement known as the Specic Absorption
Rate, or SAR. The SAR limit for mobile devices is 2.0
W/kg. Tests for SAR are conducted using standard
operating positions with the device transmitting
at its highest certied power level in all tested
frequency bands. The highest SAR values under
the ICNIRP guidelines for this device model are:
Maximum SAR for this model and conditions
under which it was recorded