Ivation IVASTDDSKBK User manual

Sit-to-Stand Desk
User Manual
Thank you for purchasing the Ivation Sit-to-Stand Desk. This User Guide is intended to provide you
with guidelines to ensure that operation of this product is safe and does not pose risk to the user.
Any use that does not conform to the guidelines described in this User Guide may void the limited
warranty.
IVASTDDSKBK
office

2
Box Contents
Sit-to-stand desk
Assembly tools
User guide
Safety Precautions
• Do not exceed the unit’s listed weight capacity.
• Do not place your hand near any of the moving parts when adjusting the height, or risk injury.
• Keep the monitor or laptop base fully on the surface of the desk. Do not allow any part of the base or
stand to hang off the edge or risk damage to the monitor, desk, or yourself.
• Always raise the desk slowly. Raising it too quickly may make the surface unstable and result in
damage to the monitor or yourself.
• Do not allow computer wires to become taught. Position the monitor to allow for a full range of
vertical motion or risk damage to the computer, monitor, or yourself.
Please read all directions before using the product and retain this guide for reference. This
product is intended for household use only.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclu-
sions. See warranty for details.
D E F GCBA
1
X6 X1 X2
S=4mm X4
Parts
A. Sit-to-Stand desk
B. Feet (2)
C. Screws (6)
D. .15” (4mm) Allen wrench
E. Clamp
F. Rods (2)
G. Discs (4)

3
Installation
1. Place the sit-to-stand desk onto the desired surface. Turn the desk over onto its side.
2. Place one of the discs over the hole as shown in the diagram below.
3. Place a foot over the disk, lining up the holes.
4. Secure the foot into place using the included screws and Allen wrench.
5. Repeat for the other side of the desk
6. Adjust the height of the desk by pushing in the buttons on either side of the desk, then
slide the sides up until they have locked into the desired notch.
2
BG
C
D
3

4
7. Place monitors and keyboard onto the desk as desired.
8. Use the included clamp to tie back any loose wires from the monitors.
Keep monitor and laptop base fully on the worksurface.
Allowing any part of base or stand to hang off the edge
may result in property damage and or personal injury.
Raise worksurface slowly. Raising worksurface too fast may
create an unstable situation resulting in property damage
and or personal injury.
4
5
E

Customer Service:
[email protected]
866-849-3049
5
Care and Maintenance
To clean the desk, wipe with a dry or slightly damp cloth.
Specifications
Base dimensions: 24.17” x 36.61” (614 x 930mm)
Workspace dimensions: 22” x 36.22 (560 x 920mm)
Keyboard tray dimensions: 9” x 24.4” (230 x 620mm)
Height: 6.5”–16.33” (165–415mm)
Weight: 33 lbs. (15kg)
Max keyboard tray weight capacity: 5 lbs. (2kg)
Max workspace weight capacity: 33 lbs. (15 kg) [email protected]
Made in China
Ivation is a trademark of
C&A IP Holdings, LLC
©2016 All rights reserved
Distributed by
C&A Marketing, Inc.
114 Tived Lane East
Edison, NJ 08837 USA
C&A Marketing UK LTD
167 Hermitage Road
Crusader Industrial Estate
London N4 1LZ, UK