digital kitchen bowl scale
user manual
Introduction
Thank you for purchasing our Digital Kitchen Bowl Scale, and welcome to the
Ivation™ family. This user manual is meant to offer you a brief walkthrough of
the device’s features and usage protocols. For additional information and
technical support, please feel encouraged to contact our help team at
Feature Highlights
• Slim, Sturdy Plastic Housing
• Bowl Shaped w/Slanted Sides
• Soft, Easy-Touch Buttons
• One-Touch Tare Function
• Large, Clear Digital Display
• 4 High-Precision Sensors
Box Contents
1 x Digital Kitchen Bowl Scale
2 x AAA Batteries
1 x User Manual
Parts & Controls
1. Weighing Surface
2. Large LCD Display
3. Unit Select Button
4. Power/Tare Button
5. Battery Compartment Door
6. Stability Feet/Sensors
Operation & Usage
Inserting/Changing Batteries:
• Locate Battery Compartment Door (5) on back of unit.
• Depress release tab and remove door from unit.
• If replacing spent batteries, use fingernail and/or flat screwdriver to gently
remove them.
• Insert fresh batteries in correct orientation and close door until it clicks.
Measuring Weight:
• Place bowl scale on flat, stable surface and press Power/Tare Button (4).
• Full display will light up. Allow a few seconds for scale to enter
weighing mode.
• Select preferred Weight Unit by repeatedly pressing Unit Select Button (3)
until correct indicator is displayed on right side of display.
Note: Pressing down on buttons may cause scale to begin weighing process.
After selecting Weight Unit, allow display to return to “0” before placing
object on scale.
• Place object on center of Weighing Surface (1). Wait until numbers stabilize
to record proper weight reading.
• To turn scale off, press and hold Power/Tare Button (4) for 2-3 seconds.
Tare Function:
• When using a container, plate, etc. to weigh another object, place the empty
container/plate on scale first. Display will show weight of empty
container/plate.
• Press the Power/Tare Button (4) to bring the weight reading to “0”, so that
you may then get an accurate reading of the object(s) you will place within
the container/plate:
- If container/plate is lighter than 100g, display will simply reset to “0”.
- If container/plate is heavier that 100g, display will reset to “0” and show
“TARE” on bottom left.
• Proceed to place the object(s) you are weighing into the container/plate.
• The weight reading will now be accurate.
Technical Specifications
Weight Capacity: 5kg/11lbs.
Weighing Units: lb:oz, ml, g, oz
Graduation: 1g
Dimensions: 7” x 7” 2.25”
Power Source: 2 x AAA Battery
Alerts: Low Battery, Weight Overload
Operating Temperature: 32°F to 104°F
1
24 3
6
TARE
+-
OZ
ML
LB’OZ
g
OZ
LB’OZ
g
ML
Distributed by
C & A Marketing
2 Bergen Turnpike
Ridgefield Park, NJ 07660
Made in China
ivation is a trademark of
C&A IP Holdings, LLC
©2014 All right reserved 5
Outside Inside
