Ivy Terrace IVR100 User manual

Qty. Description
Insert head piece into top of post
Repeat step 1 on other side
using (4) .27x3” screws.
Note: front of seat is wider
Attach seat using (2) .27x2 1/2" screws
Model: IVR100
TOOLS NEEDED
__(1) Back
__(1) Short brace
__(1) Head piece
__(1) Long brace
__(1) Seat
__(1) Hardware pack
__(2) Sideframes
__(2) Rocker bottoms
Step 1
Attach long brace, short brace and back
Step 2 Step 3
Attach rocker bottom with (4) 14x3" screws
12/17/2012
ASSEMBLY INSTRUCTIONS
back frame
sideframe
A
B
BB
Seat frame
Long brace A
Short brace
B
B - .27 X 3 SOCKET WAFER A
12
HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED
NOTE:
Partialy thread both screws
into post before tightening.
Rocker bottoms may require
some flexing for proper fit.
4MM HEX KEY, SHORT, FOR DRILL
INCLUDED
Head
4MM HEX KEY, ALLEN, T-HANDLE
INCLUDED
A - .27 X 2-1/2 SOCKET WAFER A
4

B - 8 X 1-1/4 PHIL FLAT SCREW
1
4MM HEX KEY
__(1) Table top
Phillips Head Screwdriver
Parts
QTY
Model: IVRT18
Layout Hardware
(Screw gun recommended)
3
__(1) Top leg assembly
2
Tools Needed
__(1) Bottom leg assembly
1
4A - 14 X 2 SOCKET WAFER "B"
PG 1 OF 2
12/17/2012ASSEMBLY INSTRUCTIONS

12/17/2012
PG 2 OF 2
3
Assembly
1
Place the leg assemblies together
on the table top
2
Attach the legs using (4) 14 x 2
screws in pre-drilled holes
Connect the braces using
(1) 8 x 1-1/4 screw