Iwown i7A Operator's manual

i7A
FITNESS TRACKER
QUICK USE MANUAL

01
Android4.4
& above
ACTIVATE THE DEVICE
PACKING LIST
Synchronize with" Zeroner Health Pro "
Please make sure the mobile phone is in accordance with the
following systems.
1. System requirement
Search and download "Zeroner Health Pro" from the Apple App
Store or Android Google Play. Install the App and sign up.
2. Download the "Zeroner Health Pro"
Open "Zeroner Health Pro". Select the right bracelet pairing code
on your mobile phone to complete connection.
After the first sync, the times，steps, calories, distance on the
bracelet will be reset.
The box contains the following items: host, wristband, instructions.
3. Synchronize the device with the App
Note: To use "Zeroner Health Pro" on an iPad, remember to select
"iPhone Only" when you download it.
iOS 9.0
& above
Instructions

02
Note:To monitor heart rate more accurately, please wear the
device on the upper position of your wrist and a bit tighter than
usual when you are taking exercise.
KNOW YOUR DEVICE
Wear the device on your wrist horizontally, about 2cm to carpal,
the same method as wearing watches.
Note: Please ensure that the mobile phone operating system is
iOS9.0 and above or Android4.4 and above.
Please ensure that the distance between the mobile phone and the
bracelet is within 10 meters of the normal connection range.
Please ensure that the bracelet is not in a low battery state.
1. Wearing method
When the connection between the bracelet and the
phone fails, please try the following methods:
1. Make sure that the mobile phone and the bracelet are within a
valid distance, try to turn off the Bluetooth and turn on again to
connect the bracelet.
2. Please restart the bracelet, check the correct pairing code, and
search for connections on the phone.
3. Please restart the phone, turn on Bluetooth again, search for
pairing code, and connect.
2. Methods of displaying the screen
Touch screen Raise hand Turn over the wrist

03
3.Operation
4.Charging
Switch type
Tap the screen
Switch mode/Screen wake-up
Slide the screen
Two basic operations of the bracelet.
Note: Please use the 101 guide in the App to learn more about the
icons on the bracelet screen.
1.As shown in the following picture, there are switch button on both
ends of the strap. When removing the main unit, remember to push
the switch button.
2.Insert the removed main unit into the USB port (5V) to charge (only
one side can be charged). When you start charging, the bracelet will
vibrate and display in charging mode.
Charging direction
switch button
Switch button

04
ESSENTIAL FEATURES
1. Activity Tracking
Slide the screen to Steps,Tap the screen to display Steps, Heart rate,
Calories, Distance.
2. Heart rate
Slide the screen to display heart rate data.
*You can turn on/off the auto heart rate monitor in Zeroner Health Pro.
Slide the screen to switch Training, Function, Message.
Interface
Current heart rate
Reading

05
(2) Slide the screen to switch the sports.
(1) Tap the screen to choose training.
3. Training
(3) Tap the screen to start the sport .
(4) Slide the screen to view the data in motion.
(5) Tap the icon to return to end sport, view the total
movement data.
(6) Slide the screen to exit the data display.

06
Tap the screen to enter the Function Setting mode. Slide the screen to
switch Dial, Information, Restore set, Power off.
Slide the screen to view
details of the message.
Tap the icon in the
right corner to delete all
messages.
4. Message alert
1. Change the dial face.
(1) Tap the Dial interface to enter the dial mode.
MORE FUNCTION
(2) Slide the screen to switch the dials.
(3 ) Tap the screen to choose the dial style you want.
Slide the screen to view
the next message.
Long press screen to
delete message.

2. Product information
3. Restore set
Long press the screen. The bracelet will reset pairing with the smart
phone. Schedule, Message, Alarm on the smartband will be cleared.
Tap the screen to display Pairing code&Firmware Version.
Long press the screen to power off.
4. Power off
SUPPORT MORE REMINDERS
Keep pressing the
screen to reject the call.
Incoming call
reminder Alarm clock
Schedule Reminder to
move

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.