J.Burrows JBBOSTON 3CTN User manual

ASSEMBLY INSTRUCTIONS
JBBOSTON
BOSTON LARGE HUTCH DESK
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
1/15
3CTN

Officeworks Superstores Pty Ltd. I 236-262 East Boundary Road I East Bentleigh I 3165 I AUSTRALIA
2/15
Tools Required For Assembly
Recommend 2 Adults to Assemble
Assemble Item On a Clean Flat Surface
Please check you have all hardware before assembling.
If you think you are missing any hardware please contact the store of purchase.
Please ensure you have the name of the item and hardware part required and quantity.
Please retain your receipt for proof of purchase to validate warranty. Enjoy your new purchase.
At least every 4 months, check all bolts, screws and knobs to be sure they are tight.
If parts are missing, broken, damaged or worn, stop use of the product until repairs are made,
using factory authorized parts.
Failure to follow these warnings could result in serious injury.
WARNING
.
.
.
.
Do not tighten the screws before all screws are in right place.
.Do not use this desk unless all bolts, screws and knobs are firmly secured.
.
.
.
.

PARTS LIST
3/15

5/15
B
D
AC
Step 2
Step 3
15mm
8x30mm

6/15
B D
AC
Step 4
Step 5
15mm
8x30mm

#B
Detail #B
Step 6
To remove drawer, pull drawer out until
stopped, then simultaneously push the left
plastic release lever up while pushing the
right lever down, then pull the drawer out, as
shown.
Detail #B
7/15

B
D
E
Step 7
15mm
8/15
Step 8

9/15
Step 9 AC
To insert drawer, fully extend both ball bearing
tracks on each side and align the slide runners
on the drawer with the tracks on the unit. Push
the drawer into place until closed. If the drawer
does not smoothly push into place, please
remove and repeat insertion procedure.
8x30mm

10/15
BD F
B D
Step 10
Step 11
15mm
15mm
80mm

11/15
BD
AC
Step 12
Step 13 15mm
8x30mm

12/15
B D
B D
Step 14
Step 15
15mm
15mm

13/15
AC
B
D
Step 16
Step 17
15mm
8x30mm

14/15
B
D
B
D
Step 18
Step 19
15mm
15mm

15/15
Step 20