J.Burrows JBARCHHBBK User manual

Assembly Instructions
Archer Hb Plush Chair
Page 1
This chair has a load rating of 120kg
JBARCHHBBK

C-L / C-R
Please check you have all components before assembling.
If you are missing any components please contact My Zone on Tel: [phone] or Email: [email protected]
Please ensure you have the name of the item, store purchased from, part required and quantity.
Please retain your receipt to validate warranty. Enjoy your new purchase!
KL
J
X4

Page 3
Step 1
Step 2
Note: Turn the Star Base (G) upside down. Press the Casters (H) into holes at the end of each leg.
Turn the Star Base (G) upright and insert Gas Lift (E) into the center hole of Star Base (G).
Gas Lift Cover (F) should be in place over Gas Lift (E).
F
E
G
H
Note: Align the Seat Plate (D) so the FRONT of the Seat Plate matches the FRONT label on the
bottom of the Seat Cushion (B). Tighten the screws.
I
D
B
L

Page 4
Step 3
Step 4
Note: Place assembled seat on the Gas Lift (E). Push down firmly until connection is secure.
Note: Attach Armrests (C) to the assembled Seat Cushion (B) using 4x Screws (J) with
Allen Wrench (L). Do not tighten Screws fully until you have completed assembly.
D
B
H
G
F
E
C-L
B
C-R
J
L

Page 5
Step 5
Step 6
Note: Attach Back Cushion (A) to Armrests (C) by securing 2x Screws (J) to the lower holes of
the Back Cushion (A) as shown. Do not tighten Screws fully until Step 7.
Note: Push the Back Cushion (A) to the upright position. Assemble 2x Screws (J) into the top
holes of Back Cushion (A).
A
C-L
B
C-R
J
L
J
L
A
B
C-L
C-R

Page 6
Step 7
Step 8
Your Archer Hb Plush Chair is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws.
Officeworks Superstores Pty Ltd 236-262 East Boundary Road East Bentleigh 3165 Australia
B
K
A
Note: Fully tighten all Screws (J) with Allen Wrench (L). Press the Plastic Caps (K) into the
Armrest holes to cover the screws.
C-L
C-R

*AdjustableChairTensionSpeed
‐Turncontinuouslytoadjusthow
quicklychairtiltsback&forth.

Note:Ifadjustingwhilesittinginchair:
Turnknoblefttotightentension.
Turnknobrighttoloosentension.
ARCHER HIGH BACK CHAIR
FEATURES





*ChairHeightAdjustment
‐Toincreasechairheightpulllever
upwardwhileliftingbodyweight
slightlyofftheseat.
‐Releaseleveratdesiredheight.

‐Tolowerchairheightsitfullyinto
thechairandpullleverupward.
‐Releaseleveratdesiredheight.
*ChairTensionFunction
‐Pullleverouttounlock&allowchair
totiltback&forth.

‐Pushlevertolock.Chairwillhave
slightmovementinlockedposition.