J.Burrows DONCASTER JBDONHBMBK User manual

www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE
1CTN
DONCASTER HIGH BACK MESH CHAIR
ASSEMBLY INSTRUCTIONS
JBDONHBMBK
1/10
Weight capacity:130kg
This design and instruction booklet is subject to copyright.

Estimated Assembly Time:15 minutes
Assembly Video
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
To view an assembly video,go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.
People Required
General Advice
2/10

Officeworks Ltd.|236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
3/10
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact the store of purchase.
•Please ensure you have the name of the item, required hardware part and quantity.
•Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts, screws and knobs are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 m onths.
WARNING
•If parts are missing, broken, damaged or worn stop using the product until all repairs are made
using manufacturer authorised parts.
•
Failure to follow these warnings could result in serious injury.
DANGER
CHILDREN MUST BE SUPERVISED.
••
•

Ax1 Cx1(L&R)Bx1 Dx1
Ex1 Gx1Fx5 Hx1
Ix1 K1x5
M6x20mm
M6x35mm
M6x30mm
Jx2 K2x2
Lx6 M2x7M1x6 Nx1
Ox1 Rx1
Qx1
Px1
4/10
PARTS LIST
HARDWARE LIST

5/10
D
F
G
F
E
D
Assembly
Step 1
Step 2

1
1
6/10
Step 3
Step 4

7/10
Q
Step 5
Step 6

8/10
Step 7
Step 8

9/10
BackTilt
Sitting in the chair pull lever up.
Move your upper body back and
forth to a comfortable position.
When comfortable lock the
position by pushing the lever
down.
Sitting in the chair pull lever up.
Move your body to a comfortable
position. Lock the position by
pushing the lever down.
Seat Tilt
Chair Height Adjustment
To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
Release lever at desired height.
Back Height Adjustment
Arm Height Adjustment
Adjustbale Chair Tension Speed
Turn the handwheel to adjust the back height
Pull lever up whilst moving the
arm up or down. Release lever
at desired height.
Turn continuously to adjust how
quickly chair tilts back & forth.
Note: if adjusting while sitting in chair:
Turn knob left to tighten tension.
Turn knob right to loosen tension.
To lower chair height sit fully into
the chair and pull lever upward.
Release lever at desired height.
Your feet should be resting flat on
the floor.

10/10
Care Instructions-Fabric Chairs
Clean, check & tighten all parts regularly.
Wipe over surfaces with damp cloth rinsed in warm water & mild detergent.
Dust & vacuum chair fabric to remove dust & dirt.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products,
please visit www.officeworks.com.au