J.Burrows MATRIX 1500 JBMDT157WE User manual

ASSEMBLY INSTRUCTIONS
MATRIX 1500 MANUAL HEIGHT ADJUSTABLE DESK
JBMDT157WE,MHADFR15C1,MHADFR15C2
1 / 9
3 cartons
WEIGHT
CAPACITY
100
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE(1300 633 423).

Furniture Assem bly Ins c
Estimated Assembly Time:
Assembly Video
•To view an assembly video, go to https://www.officeworks.com.au/
•Search the product by item code or name:
•Click on the icon to watch the video.
70minutes
Furniture Assem bly Ins c
Estimated Assembly Time: 30 minutes
2 / 9
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
(1300 633 423).

2 of 62 of 6
2 of 72 of 72 of 7
3 / 9
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
•Please check you have all hardware before assembling.
•
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
•
•
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•CHILDREN MUST BE SUPERVISED.
If you are missing any hardware, please contact 1300 OFFICE (1300 633 423).

4 / 9
x 1
Parts located in carton -
x 1
4
x
Parts located in carton -
x 1
2
MHADFR15C2
MHADFR15C1
x 1
3x 1
5
JBMDT157WE
Parts located in carton -
Hardware located in carton -
Hardware Spare Parts number -
MHADFR15C1
HWADFR15C1 Hardware Spare Parts number -
HWMACBLCVR

5 / 9
Knock part 4 into place using a rubber mallet.
Part 4 must be positioned as shown.

6 / 9
Scale on part 3 aligned with the hole.
Notch

7 / 9

I. Insert handle on either left or right
8 / 9
II. Do not install the handle close to a wall
Note:
F
Adjust leveler if table is uneven
after assembled

2 of 62 of 6
2 of 72 of 72 of 7
9 / 9
Warranty 8 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
If the product has any defects or does not work as intended during the Warranty Period,
This warranty does not apply:
-To cosmetic damage;
-To damage caused by consumables used in connection with the
-Where the product has not been used in accordance with all provided instructions;
-To damage arising from fair wear and tear;
-Where the product has not been subject to reasonable use;
-Where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
This warranty is provided in addition to any rights you may be entitled to under
Our goods come with guarantees that cannot be excluded under the Australian
intended for 8 years from the date of purchase by the original customer.
Officeworks will, at its election and at its expense, repair or replace the product.
product (such as cleaning products);
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
the Competitions & Consumer Act 2010.
entitled to a replacement or refund for a major failure and
entitled to have the goods repaired or replaced if the goods fail to be of acceptableloss or damage. You are also
quality and the failure does not amount to a major failure.
Consumer Law. You are
compensation for any other reasonably foreseeable
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au