J.Burrows JBPROFMBBK User manual

Professional Mesh Chair
This chair has a load rating of 160kg
JBPROFMBBK

Assemble Item On A Clean Flat Surface
I (5/16" x 5/8") J (1/4" x 1-1/4")
x 1
x 3 x 10
K

C-R
6
K
E
F
G
C-L
J
GF
F F
K
Torque 5 Nm

C-R C-L
B
J J
K
Torque 5 Nm

A
Note: Align Back Cushion (A) with Seat Cushion (B) by GENTLY inserting back support plate into the
rear hole of the Seat Plate (D) as shown and TIGHTEN by using 3 x screws (I). Tighten the screws.
Align the Plastic Cover (H) with Back Cushion (A) by pushing down.
Your Professional Mesh Chair is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws
Australia
Officeworks Superstores Pty Ltd 236-262 East Boundary Road East Bentleigh 3165
Before using your Chair, ensure that all the Bolts are tightened fully for safety.
I
H
K
Torque 5 Nm

Adjustbale Chair Tension Speed
-Turn continuously to adjust how
quickly chair tilts back & forth.
Note: if adjusting While sitting in chair:
Turn knob left to tighten tension
Turn knob right to loosen tension