J.Burrows JBACTMBMBK User manual

ACTON MEDIUM BACK CHAIR
JBACTMBMBK/JBACTMBMGR/JBACTMBMBD
1/8
ASSEMBLY INSTRUCTIONS
1 Carton
For spare parts or hardware call 1300 OFFICE
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
Weight Capacity: 120 kg

2/8
Furniture Assembly Instructions S
tyle Guide
Estimated Assembly Time: 30 minutes
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
tyle Guide
Assembly Video
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.

3/8
NOTE
CHILDREN MUST BE SUPERVISED.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact 1300 OFFICE.
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
•
•
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•

4/8
Ax5 Bx1 Cx1
Dx1 Ex1 Fx1
Hx4 Ix4 Jx1
Kx5 Lx1
M6 x 22mm M6 x 40mm M6 x 35mm
Ø6.5 x 16 x 1.5mm M4
Hx4 Ix4 Jx1
Kx5 Lx1
M6 x 22mm M6 x 40mm M6 x 35mm
Ø6.5 x 16 x 1.5mm M4
Hardware List
Hardware Spare Parts number - HWACTONMHW
HWACTONMCA
Ax5
Spare Parts number -
Parts List
Bx1
HWACTONMBS HWACTONMGL
Dx1

5/8
Step 1
Step 2
Assembly
B
A
D
B

6/8
Step 3
Step 4
H
E
F
Hx4
M4
Lx1
E
I
K
G
JK
Ix4
Jx1
Kx5
M4
Lx1

7/8
-* Chair Height Adjustment
-To increase chair height pull lever
upward while lifting body weight slightly off
the seat.
-Release lever at desired height.
-To lower chair height sit fully into the chair
and pull lever upward.
-Release lever at desired height.
*Chair Tilt
-
While seated, reach under the right side of the
chair to find the height adjustment handle.
-Pull the handle all the way out (away from the
gas lift) to allow the chair to tilt backwards, to
lock the chair in the upright or vertical position,
sit upright and push the handle in towards the
gas lift.
Step 5
*Adjustable Tilt Tension Control
-Turn continuously to adjust how quickly chair
tilts back & forth.
Note: if adjusting chair while sitting in the chair
Turn knob left to tighten tension.
Turn knob right to loosen tension.
Function
F
D
Care Instructions - Fabric Chairs
Dust and vacuum chair fabric to remove dust and dirt.
Wipe over surfaces with damp cloth rinsed in warm water and mild detergent.
If any stains persist, use a water-based cleaner. Ensure a spot test is complete first to ensure it
does not affect the fabric color.
Do not use harsh detergents, solvents or abrasive cleaners.
Clean, check and tighten all parts regularly.

8/8
Thank you for your purchase. Please retain your receipt to validate warranty. If you would like
to know more about our furniture products,
please visit www.officeworks.com.au
Officeworks Ltd warrants that this product will be free from defects and work as
intended for from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
•
To cosmetic damage;
To damage caused by consumables used in connection with the product (such as
•
cleaning products);
Where the product has not been used in accordance with all provided instructions;
•
To damage arising from fair wear and tear;
•
Where the product has not been subject to reasonable use;
•
Where the product has been intentionally or negligently damaged; and/or
•
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Warranty years
Product Warranty - valid for Australian customers only
3
3 years