J-Tech Digital JTD0104/4K User manual

www.jtechdigital.com
1-888-610-2818
[e-mail]
USER MANUAL
J-Tech Digi t al 4K@30Hz HDMI 1x4 Splitter
Model JTD0104/4K
JTD-101

1
4K 30Hz HDMI 1X4 SPLITTER
User Manual V1.5

2
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please keep this
manual for future reference.
I. Introduction
The JTD0104/4K routes one HDMI input signal to four HDMI displays. This 1x4 HDMI splitter
supports 4K @ 30Hz, 3D and HDCP 1.4 content. With its 3Gbps bandwidth and the
additional features of the latest HDMI standards, you can be sure the JTD0104/4K will work
well in your application.

3
II. Features
1. 1 HDMI input signal split to 4 HDMI sink devices simultaneously
2. Compliant with HDMI 1.4a
3. 3D video support including frame packing for all 3D formats up to a 297MHz TMDS clock
4. Supports display resolutions up to 4K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
5. Supports deep color 30bit, 36bit, 48bit per pixel
6. Supports digital audio formats DTS-HD/Dolby-True HD/LPCM 7.1/DTS/Dolby-AC3/DSD
III. Package Contents
1. JTD0104/4K HDMI Splitter ------------------------------------------------------- 1PC
2. 5V1A DC Power adapter---------------------------------------------------------- 1PC
3. User Manual------------------------------------------------------------------------ 1PC

4
IV. Specifications
Frequency Bandwidth
2.97 Gbps
HDMI Splitter Input Ports
1 x HDMI Female Input Port
HDMI Splitter Output Ports
4 x HDMI Female Output Ports
Power Supply
DC 5V 1A
ESD Protection Human Body Model
± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm)
77.6 (W) x 135 (D) x 23.5 (H)
Weight
120g
Operating Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20 ~ 90% RH (Non-condensing)
Power Consumption
5W

5
V. Operation Controls and Functions
Front Panel
1. POWER LED: This blueLED illuminates when the device is connected to the power supply
2. INPUT LED: This blue LED illuminates when the HDMI source signal is detected
3. OUTPUT LED: These blue LEDs illuminate when a display device is detected
4. ON/OFF: Power on/off splitter

6
Rear Panel
5. 5V: Plug the provided 5V DC power supply into this port and connect the adaptor
to AC wall outlet
6. HDMI OUTPUT: Connect your HDMI displays to Out1 –Out4 ports via HDMI cable
7. HDMI INPUT: Connect your HDMI source device to the HDMI Input port via HDMI cable

7
VI. Application Example

- Product pictures are for reference only.
- Specifications, pictures & software described herein are subject to change without prior notification.
- Only use the provided power supply when operating this unit. J-Tech Digital® is not responsible for any damage due to customer neglect.
- All trademarks are the sole property of their respective companies.
- Copyright ©J-Tech Digital, Inc. All rights reserved.
www.jtechdigital.com
Published by J-Tech Digital, Inc.
12803 Park One Drive
Sugar Land, TX 77478