J-Tech Digital JTD-613 User manual

–
–
JTD-613 | JTECH-18GAE2
HDMI 2.0 Audio Embedder & Extractor

Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions
carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
FEATURES
➢Supports Analog Audio Embedding
➢DIP Switch Settings - Extract the Digital HDMI Audio Signal from the HDMI Input to 2 Channel Analog
Stereo Output or 5.1 Channel Audio Output
➢Supports PCM | Dolby 5.1 | DTS 5.1 Audio Formats
➢Supports Resolutions up to 4K60HZ | 18Gbps Bandwidth
➢HDCP 2.2 | 1.4 Compliant
➢Supports CEC
➢Supports Firmware Updates via USB
PACKAGE CONTENTS
(1) x J-Tech Digital JTECH-18GAE2
(1) x User Manual
(1) x 5V DC Power Supply
NOTICE
J-Tech Digital Inc® reserves the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
SPECIFICATIONS
Operating Temperature Range
23°F to 104℉
Operating Humidity Range
5 to 90% RH (No Condensation)
Input Video Signal
0.5-1.0 Volts P-P
Input DDC Signal
5 volts p-p (TTL)
Supported Video Resolutions
4K | 1080P | 1080i | 720P | 576P |576i | 480P | 480i
Support Video Color Format
xv-YCC/deep color 36bit
Support Audio Formats
PCM | DTS-HD Master Audio | Dolby True-HD
Data Transfer Speed Rate
18Gbps (Maximum)
HDCP Compliance
HDCP 2.2 | 1.4
Power Consumption
1.5 Watts (Maximum)
Dimension (L×W×H)
4.11 in x 3.50 in x 1.12 in
Net Weight
0.34 lbs
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.

PANEL DESCRIPTIONS
Front Panel
①Micro USB Port for Firmware Upgrades
②Audio Status Indicator
③Audio Input Port (3.5mm Female)
④HDMI Input Port
⑤Power Status Indicator
⑥DC5V Power Adapter Port
Back Panel
①Audio Configuration Dip Switches
②HDMI Output Status Indicator
③HDMI Output Port
④SPDIF Audio Output Port
⑤Audio Status Indicator
⑥Analog Audio Output Port
Configuration
00
Audio Embedded
01
PCM2.0 Audio Extraction
10
5.1 Audio Extraction
11
Bypass

CONNECTING AND OPERATING
1) Connect the HDMI source device (Game Console / Cable Box / Streaming Device) into HDMI Input Port of
JTECH-18GAE2.
2) Connect the HDMI display device (HDTV / Projector) into HDMI Output Port of JTECH-18GAE2.
3) Connect SPDIF audio cable or analog audio cable to input port of audio processor (Soundbar / AV
Receiver) and corresponding audio output port of JTECH-18GAE2.
4) Connect DC 5V Power Adapter to the JTECH-18GAE2.
Application Diagram

MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
PRODUCT SERVICE
1) Damage Requiring Service: The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in performance;
(e) The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement Parts: When parts need replacing ensure the service personnel uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.
4) Safety Check: After repairs or service, ask the service personnel to perform safety checks to confirm that
the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, J-Tech Digital
(referred to as "the warrantor") will, for the length of the period indicated as below, (1 Year) which starts with
the date of original purchase ("Limited Warranty period"), at its option either(a) repair your product with new
or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will
be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during the
warranty period. This Limited Warranty is extended only to the original purchaser and only covers product
purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty
service.
Mail-In Service
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original
carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you
can be reached.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or
failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, maladjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized
Service, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY

COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.)
3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
EXTENDED WARRANTY
With the registration of supported J-Tech Digital products, you extend the current warranty by 6 months. This
extension is added to the warranty that starts at the purchase date of the device supported. Total product
warranty with the extended period will equate to a total of 18 months of warranty from the date of purchase.
For extended warranties to be accepted, all warranty extensions must be claimed within 30 days of purchasing
the eligible J-Tech Digital product. Extensions attempted to be claimed outside of the 30-day window will not
be accepted.