JabloCom EYE-02 Installation and operating instructions

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 1 -
!
!
!
!
!
!
!
!
Wireless peripherals
EYE-02 GSM Security Camera
Application note
!
!
!
!
!
!
!
!
!
!
!
!

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 2 -
!
!
1 Content
!
1!Content ............................................................................................................................................. 2!
2!Introduction ...................................................................................................................................... 3!
2.1!Overview of peripherals .................................................................................................................... 3!
3!Detectors .......................................................................................................................................... 4!
3.1!Wireless fire (smoke and temperature) detector .................................................................................... 4!
3.2!Wireless magnetic detectors ............................................................................................................. 4!
3.3!Passive infrared (PIR) detectors ......................................................................................................... 5!
3.4!Wireless gas leak detector ................................................................................................................ 5!
3.5!Wireless optical barrier ..................................................................................................................... 5!
4!Wireless Switches............................................................................................................................. 6!
4.1!Controlling and configuring the switches ............................................................................................. 6!
5!Wireless buttons ............................................................................................................................... 8!
6!Sirens ................................................................................................................................................ 9!
7!Thermostats...................................................................................................................................... 9!
8!JabloTool Applications................................................................................................................... 10!
9!Enrolling peripherals ...................................................................................................................... 11!
9.1!Switching camera into Enroll mode ...................................................................................................11!
9.1.1!Switching camera to Enroll in JabloTool ...............................................................................................................................................11!
9.1.2!Switching camera to Enroll mode with remote control.......................................................................................................................11!
9.2!Enrolling detectors ..........................................................................................................................11!
9.3!Enrolling wireless switches ..............................................................................................................12!
9.3.1!Enrolling smart socket AC-88 ..................................................................................................................................................................12!
9.3.2!Enrolling relays AC-82 and UC-82 ...........................................................................................................................................................12!
9.3.3!Enrolling relay AC-83 .................................................................................................................................................................................12!
9.4!Enrolling wireless buttons ................................................................................................................13!
9.5!Enrolling sirens ..............................................................................................................................13!
9.5.1!Enrolling JA-80L..........................................................................................................................................................................................13!
9.5.2!Enrolling JA-80A .........................................................................................................................................................................................13!
9.6!Enrolling thermostats and camera into wireless switches .....................................................................13!
9.6.1!Enrolling thermostats into EYE-02 camera............................................................................................................................................13!
9.6.2!Enrolling thermostats and camera into wireless socket AC-88..........................................................................................................13!

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 3 -
!
!
2 Introduction
The application note describes possibilities of using camera EYE-02 with wireless peripherals from the OASiS system
manufactured by Jablotron Alarms. Please visit www.jablotron.com to find complete list of peripherals. When the peripherals
are used with camera EYE-02, the camera plays the role of the control panel. Camera EYE-02 is equipped with 7 internal
detectors and 2 virtual switches. Wireless peripherals further expand camera capabilities.
2.1 Overview of peripherals
Five types of peripherals can be used with the camera: detectors, wireless switches, wireless buttons, sirens and thermostats.
!
Picture 1: Examples of peripherals used with EYE-02
Up to 20 wireless peripherals can be used with the camera at the same time. Operating range of peripherals is 100m in free
space. Wireless buttons, detectors and sirens are powered by batteries with typical lifetime of at least 2 years. Exact battery
lifetime depends on the battery type used and it is mentioned in the manual of each peripheral. Detectors and sirens
communicate with the EYE-02 camera, i.e. they report information about device status. Camera informs the user
•when camera does not receive regular reports from the peripheral (communication with peripheral is interrupted) or
camera starts receiving regular reports from the peripheral again (communication with peripheral is recovered).
•when detector battery is low or there is failure in AC power when detector is powered from the mains.
•when tampering (unauthorized manipulation) into detectors or sirens happened. Information is sent by the peripheral
to the camera even when the camera is in SLEEP mode. If you need to replace the battery in the peripheral, switch
the camera to CONFIG mode to avoid false alarms.
When detectors and wireless buttons are activated, camera makes Alarm event and informs the user by email, SMS, MMS,
call or it sends information about the Alarm with video record to external JabloTool server.

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 4 -
!
!
3 Detectors
Detectors expand the area which camera monitors and also enable the camera to report additional events, e.g. Fire alarm
generated by Fire and smoke detector.
3.1 Wireless fire (smoke and temperature) detector
!
JA-80S
JA-80S detects the presence of fire inside a building. It reacts to visible smoke or when a
critical temperature in the room is exceeded. It contains a built-in local warning siren. It is
typically mounted on ceiling in a room or hall.
The detector complies with EU Directives 98/34/ES and 98/48/ES stating the obligation to
mount fire detectors in new buildings.
Example of use in cottage: Detector is activated by smoke and temperature caused by fire.
Internal detector siren sounds and camera records video of the room inside. At the same time,
the camera informs the user about Fire alarm by e-mail, MMS, SMS, call or by sending
information to external JabloTool server.
3.2 Wireless magnetic detectors
Magnetic door/window detectors consist of two parts. There is a magnet in one of the parts and if both parts are moved away
from each other (window or door is open), the detector is activated. It sends information to the camera which records video
and informs the user.
!
JA-81M
Magnetic door/window detector JA-81M
Example of use in public premises: A user wants to have a list of people who entered a building.
Opening the door causes an alarm event and the camera records video for selected time after the
door was opened.
Picture 2: EYE-02 camera used wit h Mag net ic door (windo w) opening det ect o r JA-80M
You can connect by wires additional detector to the JA-81M. You can use any detector which
connects or disconnects contact after its activation. Camera will record video and inform the user
also after this additional detector is activated. JA-81M can be also used with flood detector LD-
81 that signals flooding of rooms or cellars.
Example of use in protecting precious paintings: JA-81M is placed on the door leading to a room.
Inside the room, there is a painting hanging on the wall. Detector connected by wires to JA-81M
is placed under the painting. If someone opens the door, the door detector reports alarm to the
camera. If someone removes the picture from the wall, the detector closes or opens its circuit
and so it informs by wires the detector JA-81. This informs the camera and the user.
Other available types: Magnetic door detector JA-82M which is fit directly into door or window
frames. The transmitter JA-80D has terminal point to which additional detector can be connected
by wires. It does not have its own magnetic sensor.

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 5 -
!
!
3.3 Passive infrared (PIR) detectors
PIR detectors are activated by changes of temperature. This typically happens when a person or animal enters the detection
zone. Connecting of additional PIR sensors allows extending of the monitored area for spaces that do not need to be
monitored visually. External PIR sensors also extend the distance at which the camera can detect motion by passive infrared
detection. Activation of PIR detectors causes Alarm. Camera records video and informs the user about the Alarm.
JA-80P
Wireless PIR motion detector JA-80P
Example of use: Using detectors JA-80P to monitor motion in big factory hall. Several detectors can be
used at the same time.
Other available types: JA-80PB is PIR detector combined with glass-break detector, suitable for
areas accessible by breaking glass windows. JA-80W is PIR detector combined with microwave
detector. When PIR detector registers movement, the MW detector is activated and confirms activation
of the PIR detector. JA-86P is PIR detector with two PIR sensors inside Alarm is generated only when
both sensors are activated. Suitable for areas where false alarms can be caused by small animals.
JA-88P is PIR detector suitable for outdoor use. Detector is protected from dust and flushing water
(IP55).JA-85P and JA-85B are mini-size PIR detectors.
JA-82SH detects tilt and vibration of doors and windows.
3.4 Wireless gas leak detector
!
JA-80G
JA-80G is activated by combustive gases or fume leakages. This detector is mains-powered (230V AC)
because of higher power consumption. It also provides a switch to shut down an electric gas inlet valve.
Example of use at home: Detector is placed in the room with gas heating. Gas inlet valve is connected by
wires to the detector. If gas leaks, the detector reports this to the camera and camera generates Alarm. At
the same time, the detector shuts down the gas inlet.
3.5 Wireless optical barrier
!
JA-80IR
JA-80IR is optical barrier which indicates breach into a protected area by crossing the infra-red line
between the transmitter and the receiver. It is a product of company Optex supplemented with
transmitters compatible with OASiS system. There can be up to 60m distance between the units. The
optical barrier can also be used outdoor, it is protected from dust and water.
Example of use at home: Optical barrier is placed along swimming pool on the garden. If a small child
crosses the barrier, the camera will inform the parents about this by call and SMS.
Picture 3: Example of using camera with Fire detector, Flood detector and Door opening detector.

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 6 -
!
!
4 Wireless Switches
Camera EYE-02 is equipped with two virtual switches. These switches work as wirelessly sent commands to wireless switches
to connect or disconnect their contact.
!
AC-88
Wireless socket AC-88
It is switch made as do-it-yourself solution. You can remotely turn ON and OFF all domestic appliances,
lighting, heating, watering, etc. powered by the mains (AC 230V). It can be also used in the inverse mode -it
disconnects contact when it is turned ON. Wireless socket can be also turned ON and OFF manually by
pressing its button.
Other available types: UC-82, AC-82 and AC-83 are wireless switches are in the shape of boxes into which
wires of electric circuit are attached. UC-82 is powered by 12V DC power, AC-82 is powered by AC mains.
AC-83 is suitable for use in heating systems. For more information go to www.jablotron.com.
!
Picture 4: Using EYE-02 camera wit h smar t so cket , r elay and t hermost at
Use with garden watering: On your cottage you have a watering system with water pump placed in the well. You connect the
power supply of the pump via the smart socket. Then you remotely turn on the sprinkler in your garden. You can adjust the
time for which you turn ON the watering depending on the weather.
Use with thermostat: You leave home for a longer time. Before you return, you would like to have your home heated to
comfortable temperature. You will use the smart socket together with thermostat TP-83. You will remotely turn ON the smart
socket by the camera. The thermostat will then start controlling the socket. The socket will turn ON the heating if it receives
such command from the thermostat. Your rooms will be heated to predefined temperature before you arrive. If you wish to
maintain only minimum economical temperature you turn the wireless switch OFF.
4.1 Controlling and configuring the switches
Camera virtual switches send commands to the switches like wireless socket. Camera switches can be configured to several
modes. Camera switches can be directly turned ON/OFF by the user or they can be configured to turn ON automatically when
a predefined event happens.
Possible modes of camera switches:
SMS ON/OFF
Switch will turn ON or OFF after pressing a button in JabloTool or after sending an SMS
command. You can specify the time for which the switch should be turned ON.
Example of use with watering: Switching garden sprinkler ON for 2 hours.
SMS (pulse)
Switch will turn ON for 2 seconds. Then it turns OFF again.
Example of use at home: You open entrance gate into the yard.
WATCH
(camera is switched into
Switch turns ON and will remain turned ON as long as camera is in WATCH mode.
Example of use as household protection: You automatically turn off domestic appliances

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 7 -
!
!
WATCH mode)
by switching the camera into WATCH mode when you leave home. After you return you
switch the camera into SLEEP mode and the appliances will turn on again. This minimizes
the risk of fire when you are not at home and it reduces consumption of electricity. You
need to set the smart socket to inverse mode so it disconnects contact when it is turned
ON by camera.
Panic alarm
(external detector generated
Panic alarm)
Switch will turn ON for 120 seconds.
Example of use in social care house: client presses wireless button. Smart socket turns
ON the light in the room where patient pressed their wrist HelpMe! button. Camera will
record video of the room at this moment.
Fire alarm
(external detector generated
Fire alarm)
Switch will turn ON for 120 seconds.
Example of use in factory: Smart socket switches ON external high-capacity siren to
signalize Fire alarm. Camera will record video in the hall where the wireless Fire detector
was activated.
Alarm
(detector generated Alarm)
Switch will turn ON for 120 seconds.
Example of use in shop: Smart socket switches OFF power supply to electric door locker
so the door remains locked after Alarm.
Wake-up
(camera was woken up)
Switch will turn ON for the predefined wake-up time. The time can be configured in
JabloTool via USB > Configuration, General settings.
Example of use at home: Wireless socket switches ON lamp in courtyard when camera is
woken-up. The camera does not report Alarm yet.
AC fault
(AC power failed)
Switch will turn ON and remain turned ON until AC power is recovered.
Example of use in remote location: Smart socket turns ON diesel power generator after
AC power failure.
Light ON
(camera infrared illumination
was turned ON)
Switch will turn ON and remain turned ON as long as camera infrared illumination is turned
ON.
Example of use at night: Smart socket turns ON external infrared illumination after camera
activates its internal infrared illumination. This will increase the reach at which the camera
can take pictures at night.
Camera switches can be configured and controlled in JabloTool via internet (www.jablotool.com,tab Peripherals), or via USB
cable (tab Configuration, External devices). Switches can also be controlled by SMS commands if they are set to SMS
ON/OFF or SMS ON/OFF (pulse) mode.
Example of SMS command: "<Remote Access Password> DeviceX ON" will switch the DeviceX ON)
Example of SMS command: "<Remote Access Password> DeviceX ON 02:00:00" will switch the DeviceX ON for 2 hours.
Switches are called Devices in SMS commands. For more information on SMS commands see the camera manual.

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 8 -
!
!
5 Wireless buttons
Wireless buttons inform the camera and its user when a person presses them.
!
RC-80
4-button wireless remote control RC-80
Remote control can switch camera into WATCH, SLEEP, CONFIG and ENROL mode. User can also
test camera internal detectors. This remote control is delivered with the camera. Additional controls
allow more people to operate the camera independently.
!
RC-87
Help! button RC-87
Pushing the button causes Panic alarm even if EYE-02 is in SLEEP mode.
Example of use: Elderly people who may be in emergency due to sudden drop in their health condition
simply press the panic button and the camera will report the Panic alarm via SMS, MMS, call, email or
JabloTool server and contact parents, neighbours or hospital for help.
Other available type: wireless wall button RC-88
!
Picture 5: Using EYE-02 wit h wireless but t o ns RC-87 and RC-88
!
RC-89
!
Wireless doorbell button RC-89
Example of use: The camera is focusing on entrance area in a building. Pressing the doorbell button
wakes the camera up. The camera then records video of entrance area. The button can be also
configured to generate Panic alarm.
The doorbell button RC-89 can be used in combination with indoor siren JA-80L which sounds a melody
after the doorbell button is pressed.
!

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 9 -
!
!
6 Sirens
The primary function of sirens is to inform visually and acoustically about Alarm events.
!
!
JA-80L
Wireless internal siren JA-80L
JA-80L is a mains-powered (230V AC) siren with multiple functions.
It sounds when Alarm in the camera occurs. The sounding can be activated and its length adjusted
between 0 seconds and 4 minutes (go to JabloTool, Peripherals, then click on the enrolled JA-80L).
The same length of alarm indication applies to the siren JA-80A if it is enrolled in same the camera.
The siren confirms intruder alarm to the camera when it is disconnected from power during the time
while it sounds an Alarm.
Siren can signalize entrance or exit delay with a beep. Entrance and exit delay can be adjusted in
JabloTool, tab Settings.
Detectors from the group RC-8x and JA-8x can be enrolled into the siren. The siren plays a melody
after such detector is triggered. Different melodies can be associated with different detectors.
Example of use: Siren plays a melody after a (Doorbell button RC-89) at the entrance is pressed. The siren
plays a different melody when that back door at home is open (Door detector JA-80M). The siren sounds
Alarm when there is a fire in the kitchen (Fire and smoke detector JA-80S). More detectors can be enrolled
in the siren at the same time.
!
JA$80A!
Wireless outdoor siren JA-80A
JA-80A is completely wire-free siren in a solid housing. It signalizes intruder alarm acoustically and by
red LED lights. The length of sounding in case of an alarm event can be set between 0 seconds and 4
minutes (go to JabloTool, Peripherals, then click on the enrolled JA-80A). If the internal siren JA-80L is
also enrolled, it sounds alarm for the same period of time.
The siren is battery powered. Maximum battery lifetime is 3 years. Opening the cover signalizes
unauthorized manipulation (Alarm) to the camera. LED lights keep flashing for 30 minutes after Alarm.
!
7 Thermostats
Thermostats control temperature in heated premises. They control a wireless switch and automatically switch it ON or OFF. If
temperature in the room is lower than set temperature, the thermostat sends turns the wireless switch ON. The wireless
switch connects contact and the heating turns ON.
Camera can be enrolled into wireless switch where thermostat is enrolled. Camera then works as a central switch. If camera
turns the wireless switch OFF, the wireless switch will only connect contact when the temperature decreases below the
economical temperature. If camera turns the wireless switch ON, the wireless switch will always follow the command from
thermostat so the room will be heated to the selected temperature. To work like this, camera needs to be enrolled into the
wireless switch and also thermostat needs to be enrolled into this wireless switch.
Thermostat can be also enrolled directly to the camera. Thermostat will then report to the camera
•when battery in the thermostat is flat
•when temperature decreases below preset level (event Panic Alarm is generated in the camera); this can indicate that
heating system has stopped working or there may be danger that heating system will freeze.
•when temperature exceeds 60°C (event Fire Alarm is generated in the camera)
More thermostats can be enrolled into one wireless switch. Heating is then turned ON if at least one thermostat requires this.

EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
- 10 -
!
!
!
TP-82
Wireless thermostat TP-82
Programmable wireless indoor thermostat TP-83
TP-82 and TP-83 measure and set temperature that should be maintained in a room. Temperature
adjustment is performed by turning the setting knob. Thermostats are enrolled into smart socket AC-88 or
wireless switches AC-82, UC-82 and AC-83. These wireless switches then control the heating according to
thermostat commands. The wireless switches can be then also enrolled into the camera so they can be
remotely turned ON and OFF by the camera.
TP-83 has a programmable weekly heating schedule. You only set when you wish to achieve the selected
temperature (e.g. on Friday evening) and the thermostat will begin to heat in advance so that your room is heated
to the selected temperature at the selected time.
!
!
Picture 6: Scheme on how EYE-02 works with wireless relay and thermostat
8 JabloTool Applications
JabloTool is camera management interface. In JabloTool you connect to your camera to see live picture from the camera,
events in the history or to configure and control your camera. You can connect to your camera either via your account on the
internet portal JabloTool (www.jablotool.com)or you can download JabloTool software from www.jablocom.com/software and
install it on your PC. Then you connect to your camera via USB cable.
Camera can report information from the detectors directly to the users by SMS, MMS, e-mail or voice call. In addition, you can
activate reporting to an external server via internet. Users then connect to this server via internet and they can see events with
pictures as camera reported them to the server in the past.
Picture 7: Example of reporting information from detectors via JabloTool application Access &Back-up
In order to use this possibility you need to activate the application Access & Back-up in your JabloTool account on
www.jablotool.com. For more information on JabloTool Applications see www.jablotool.com/applications.