JabloCom EYE-02 User manual

GSM Security Camera
EYE-02

Camera EYE-02:
Package content:
II.
B
A
12
4
3
EYE-02 camera
1Camera lens
2PIR motion sensor
3Green light 4Red light
5Infra red ilumination
6GSM Antenna
7Power button
8AC adaptor socket
9USB connector
10 Battery cover
Battery
Instalation CD
Key-fob
6
8
9
7
10
5
Screwdriver
User manual
AC adapter
Wall mounting screws
Connecting cable
USB cable

JR_EYE-02.ENG.MAN.Manual.12.D - 1 -



EYE-02 is a security and monitoring camera which communicates wirelessly via the GSM network.
EYE-02 integrates the following built-in detectors that allows to detect an intruder:
 Detects movement by sensive detecon of human body temperature.
 Recognizes the specic sound of breaking window glass
 Recognizes any unwanted change in the camera‘s posion and angle
 Detects changes in a scene by taking snapshots regularly and comparing
them
• EYE-02 is simple to install and congure (suitable for DIY installaons)
• EYE-02 sends an alarm record using MMS, e-mail, SMS or voice call. Copies of pictures and videos
can be stored on the memory card or can be stored at a web server. Alarm Receiving Centers are
also supported.
• EYE-02 allows 24 hour monitoring via its night view mode.
• EYE-02 is compable with a wide range of external wireless devices (refer to the table on the inside
back cover of this manual).


1.1 Basic Features ........................................................... 1
1.2 EYE-02 Camera Descripon ..................................... 2
1.3 EYE-02 Camera Internal Parts ................................. 2

2.1 Package Contents ..................................................... 2
2.2 Installaon ................................................................ 3

3.1 Remote Control ........................................................ 4
3.2 Working Modes ........................................................ 4
3.3 CONFIG Mode ........................................................... 5
3.4 Detectors .................................................................. 5
3.5 Proles ...................................................................... 6
3.6 Reports ..................................................................... 7
3.7 SECURITY SETTINGS ................................................. 8

4.1 Set-Up and Conguraon via PC ............................. 8
4.2 SMS Commands ....................................................... 9
4.3 Event Reports ......................................................... 11
4.4 Video Record Seng (Available through JabloTool
only) ....................................................................... 12
4.5 GSM Network Seng ........................................... 13

5.1 Call Control ............................................................. 14
5.2 Night View .............................................................. 14
5.3 Monitoring ............................................................. 14
5.4 Switching OFF and ON ............................................ 14
5.5 Baery Mode ......................................................... 15
5.6 Micro SD card ......................................................... 15
5.7 Reset to Factory Defaults ...................................... 16
5.8 External Wireless Devices ..................................... 16
5.9 Outdoor Installaon............................................... 17



8.1 Baery Informaon ............................................... 18
8.2 Warranty................................................................. 18
8.3 Safety Instrucons ................................................. 19

JR_EYE-02.ENG.MAN.Manual.12.D - 2 -

Please refer to the picture A on the inside front cover of this manual.
Camera lens GSM Antenna
PIR moon sensor Power buon
Green light (LED) AC adaptor socket
Red light (LED) USB connector
Infra red illuminaon (LEDs)  Baery cover

Please refer to the EYE-02 camera picture D on the back cover of this manual.
Dual band GMS antenna Microphone + digital signal processing
• Glass-break detecon

EDGE/GSM module
- Picture transfer to mobile phones via MMS
or e-mail
- Data connecon to monitoring servers
and ARC

Short range radio
• Free band 868 MHz
• Allows cooperaon with remote controls
• Possible extension with JABLOTRON professional
wireless security system
Buzzer
• Built-in acousc indicator 
Tilt and vibraon detector
• Protects against intruder manipulaon with the
camera

Li-Ion baery
• Provides back-up energy during electricity
failure

Infrared reector
• Illuminates the scene by non-visible beams for
camera night vision
SD memory card
• Extends memory capacity up to 4 GB  PIR infrared detector
• Excellent sensivity for human body detecon
SIM holder
• For a standard GSM SIM card  VGA camera
• CMOS chip with 2.9 mm lens

Before installing the camera, ensure you have a SIM card provided by your GSM operator with
an acvate the EDGE/GPRS internet connecon and the MMS service.
Some SIM cards are protected by PIN code. It is necessary to disable the PIN code protecon
of the SIM card. To do this, insert the SIM into your mobile phone and disable the PIN security
code. If this is not observed, the EYE-02 camera may not operate correctly.

Unpack the camera and check the package contents. Please refer to the picture B on inside front cover
of this manual.
1 Camera 6 Power cable extension
2 Baery 7 CD
3 Remote control 8 User Manual and Quick Guide
4 Power adaptor 9 Dowels and screws
5 USB cable 10 Screwdriver
Use only baeries, chargers and accessories approved by JABLOCOM for use with this par-
cular model. The use of any unapproved device may invalidate any approval or warranty, and
may be dangerous.

JR_EYE-02.ENG.MAN.Manual.12.D - 3 -

For an extended graphic version of the installaon procedure, see the Quick Guide manual.
• Insert SIM card and baery into camera


 

• Install the camera to the selected posion



 
• Connect camera to power source
 


• Enroll your mobile phone and remote control to the camera

  

JR_EYE-02.ENG.MAN.Manual.12.D - 4 -


The package contains a wireless remote control (RC-86 type) which can be used
to switch between camera modes.
Changing the mode by using the remote control is signaled both by the LED
lights on the camera front panel, and by an acousc signal. Meaning of the
LEDs and acousc signals is as follows:
  
 Lights are O. 
 Green light is permanently On. 
 Red and Green lights blink
slowly together. 
 Red and Green lights swap
blinks slowly. 
 Red light is permanently On. 

The EYE-02 camera has three main working modes:    ,    and     .
Mode Descripon Buon on
the Remote Control
SLEEP
SLEEP mode is a stand-by mode of the camera. The camera doesn’t
detect any movement in the targeted area and the major detectors
are disabled. The only acve detectors are those which protect came-
ra itself against the unwanted manipulaon by an intruder.

JR_EYE-02.ENG.MAN.Manual.12.D - 5 -
Mode Descripon Buon on
the Remote Control
WATCH In WATCH mode camera guards fully the targeted area, all detectors
are acve.
CONFIG
CONFIG mode allows user to change camera sengs and switch the
camera to other special modes (ENROLL, TEST, USB). and
together
The chosen camera mode is terminated by switching to a dierent camera mode.

CONFIG mode allows the user to change camera’s sengs.
To enter the CONFIG mode by the remote control, press and buons simultaneously – red and
green LED lights in the front panel will start to blink slowly at once.
From the CONFIG mode is possible to switch to other special modes (ENROLL, TEST, REPORT, USB).
  

In the ENROLL mode, the camera allows to enroll new external wireless
devices such as the remote controls, detectors, sirens, etc. Also a new
contact – phone number can be enrolled in this mode by just a simple
call to the camera. ENROLL mode is terminated automacally aer one
new items has been enrolled.

TEST mode is a special mode to test all detectors funcon without
causing unwanted number of alarm reports. Camera beeps and blinks
aer acvaon of any sensor.

In the REPORT mode, the camera sends a special report to all contacts
(call, MMS etc.) according to the camera sengs.
Example of SMS from the camera: Camera EYE-02 reports: User origi-
nated camera test External wireless device RC-80(1), Time:13/11/2008
11:33:49.
press and buons
simultaneously for about
4 sec

In this special mode camera behaves as a standard USB ash disk.
This allows to access les on SD memory card without installaon of a
special camera driver to PC.
Press power
buon on
camera back
panel
To protect the camera’s safety special modes will be closed automacally aer a 5 minutes
meout.

The EYE-02 camera integrates a wide range of detectors. This sophiscated soluon of combining vari-
ous types of detectors enables the user to protect the desired area from a wide range of threats. This
chapter briey describes individual detector’s principles necessary for correct seng of detecon.

PIR detector (Passive InfraRed sensor) or a Human Body Detector is the most common type of professi-
onal security systems detectors. PIR can detect even very small changes of temperature dierences in
front of the camera.

The key principle of this detector is derived from a professional surveillance camera system. It perma-
nently analyzes the scene and detects any change in the picture.
A sophiscated digital algorithm provides an excellent resistance to false alarms caused by non-essen-
al changes in pictures (geng dark, switching on the street lamps, etc).
The user can simply mask-out (hide) a part of a picture in order not to detect changes in this part (mask
of the street trac, etc.) and set the sensivity according to the size and speed of change in the picture.
As the DSP method is energy demanding, MIP is usually acvated aer some alert from PIR detector.

JR_EYE-02.ENG.MAN.Manual.12.D - 6 -

Glass-break detector uses a digital signal analysis from the microphone and is able to detect a characte-
risc sound of the breaking of a window up to 9 meters away.
The Door-Opening-Detecon is a special type of detecon which uses the acousc signal ltering. It
allows detecon of the infrasonic wave (pressure wave) caused by door or window opening.
GBS sensor can be used for indoor installaons only.

Built-in lt and vibraon detector can detect a tampering or an unwanted manipulaon of the camera.
Example: Stealing the camera body or changing camera posion.
As vibraon detectors are very sensive, it should not be use for outdoor installaon to prevent
the false alarms caused by the wind gusts. The vibraon detector sensivity reducon may be
necessary also for indoor installaon with usual vibraons in some cases.
The detectors are opmized for applicaon in rooms with maximum distance up-to 10 meters.

The EYE-02 camera allows fast and simple seng of all necessary detector parameters by selecng one
of the pre-dened PROFILEs. These proles are suitable for most camera applicaons. If necessary, the
prole may be further adjusted by the user.

HOME prole has been designed for camera installaon inside a
building (house, at, oce). During WATCH mode, there are no
movements of people, no wind dras, no signicant temperatu-
re changes, or loud noises etc. expected.

OUTDOOR prole ts best camera installaon outside your
home.
The camera signicantly reduces its detectors’ sensivity in
OUTDOOR as there are many possible sources which could
cause a false alarm triggering (sunshine, animals, street noise,
wind, etc.).
For outdoor installaon see chapter 5.9.

This prole is suitable for installaon inside your garage. It is
similar to the HOME prole. Addionally, the GARAGE prole
provides a 30-second entrance delay. It allows you to open the
garage or home entrance door rst and switch the camera to
SLEEP during this delay.

JR_EYE-02.ENG.MAN.Manual.12.D - 7 -

Prole CARE has been especially designed for monitoring small
children and elderly or disabled people.
The camera used in CARE prole allows
the user to leave their home, stay in a short
distance away from the home and watch
their sleeping baby or ill grandmother etc.
at the same me.The camera is acvated
by movement or by a PANIC alarm
(triggered by a personal wrist buon)
The internal acousc camera signals are disabled in the CARE prole. Also TILT detector is
blocked to allow the camera manipulaon.

The most powerful prole is SHOP. In this mode, all detectors
are acve, including the permanent process of “Moon in
Picture” detecon. This prole oers the highest quality of
permanent monitoring; consequently it is the highest energy
consumpon prole.
This prole perfectly ts places requiring the whole day moni-
toring and full protecon during the night me, such as shops,
oce corridors and recepon areas, etc.

The EYE-02 camera can report events to mobile phones (via voice call , text message , MMS )
or to e-mail addresses. Up to 10 dierent phone numbers and 10 e-mail addresses can be saved to the
camera list.
By the default sengs camera sends an MMS and makes a call to all enrolled contacts in case of an
alarm.
To set the contacts, use the JabloTool soware, Contacts menu (see chapter 4).
Each stored contact can have its own report level set. Three levels (Normal, Extended, All Details) indi-
cate how many events should be reported to the contact. Normal level reported contacts will receive
ALARMS only, Extended and All Details level contacts will receive addional reports for specic events.

JR_EYE-02.ENG.MAN.Manual.12.D - 8 -
JabloTool also allows the user to block some of the reporng channels (calls , SMS , MMS )
by checking-o the appropriate check-box in the contact line.
New contacts may also be added via an SMS command (see chapter 4.2, CONFIG commands).
To add a new contact by calling you can call the EYE-02 camera directly from a new phone number
while the camera is in the ENROLL mode.
If there are no phones saved in the contact list (aer installing a new EYE-02 camera or aer using the
factory reset funcon), the camera switches automacally to ENROLL mode and waits for an incoming
call.
Camera sends e-mails with the reply address [e-mail]. Please check your e-mail
client SPAM lter to accept e-mails from this address.

Camera is not protected by any password in the factory sengs..
Camera process SMS messages or receive calls only from phone numbers stored in Contacts.
It is possible to setup two passwords.

This password is necessary for any access to your camera (SMS, JabloTool). If it is used, camera process
SMS messages which begins with the password from any phone number.

This password is necessary for conguraon changes excluding contacts.
For password seng or changing use JabloTool or conguraon SMS (chapter 4.2).
Password can contain 4-31 characters, allowed symbols are 0..9, a..z, A..Z. Password is not
case sensive.
Protect your camera by seng the Remote Access Password.


The most convenient way to set-up the EYE-02 camera and congure its parameters is by using PC and
the JabloTool soware.
JabloTool  is available as a soware on installaon CD included in the camera package.
JabloTool  works remotely with the camera from www.jablotool.com.
Funcon of both JabloTool versions are the same, the only dierence is in the method of connecon
to the camera -  requires a connecon to the internet and establishes a cable-free
connecon with the camera,  interconnects the camera with the PC by a USB cable.
The advantage of USB connecon is faster data transfer from the camera.