Jabra GN1220 User manual

Simple connectivity.
convenient noiSe-at-work
compliance.
JABRA GN1220
JABRA®IS A REGISTERED TRADEMARK OF GN NETCOM A/S
WWW.JABRA.COM
The Jabra GN1220 is a cord offering inexpensive connectivity
to a wealth of telephone systems and no nonsense, hassle-free
compliance with the latest in EU noise regulations. The Jabra
GN1220 is part of the Jabra GN1200 Series and builds on the
same intuitive-to-use design.
- Makes our most popular corded headsets compliant with EU
Noise-at-work directive (EN 2003/10/EC)*
- Works with most desk phones including IP hard phones
- Microphone amplification when required
- Simple 8-position slide adjustment means no need for a user
manual (QD to RJ9 variant only)
Aside from complying with noise-at-work regulation the Jabra
GN1220 is the answer to a common issue. When hooking up
a new headset there is not always a dial tone. The problem
could be the headset or the telephone? But chances are it is the
cord. Even though the headset and telephone may be plug-com-
patible, the wiring is determined by the individual telephone
manufacturer.
The Jabra GN1220 (QD to RJ9) features eight separate wire con-
figurations - including three with built-in microphone amplifica-
tion. Simply connect the Jabra GN1220 and headset through the
QD (Quick Disconnect) plug and flick the slide from one position
to the next until a dial tone is heard. It’s as simple as that!
Noise-at-work compliance has never been more convenient.
DATASHEET
Jabra GN1220
Jabra GN1220 is available in two variants to fit almost any
need:
- QD to RJ9 with straight cord
- for connecting most telephones on the market to our most
popular headsets
- QD to QD with straight cord
- designed for GN Ellipse (when used with GN2000, GN2100
and GN2200)

JABRA GN1220
Jabra GN1220
GN1220 Switch
poSitioN
MatchiNG telephoNe SySteM Mod pluG wiriNG aMplified
MicrophoNe
equivaleNt
GN cable
1 Standard (most common) M-, R, R, M+ No 8800-00-01
2 Cisco IP phones R, M-, M+, R No 8800-00-37
3 Ascom office and Philips phones R, M+, M-, R No 8800-00-03
4 Japanese phones, NEC, Nitsuko M+, R, R, M- No 8800-00-25
5 Plantronics Vista Base R, R, M+, M- No 8800-00-20
6 Panasonic phones with modular plug M+, R, R, M- Yes 8800-00-25A
7 Nortel digital phones and Avaya IP phones M-, R, R, M+ Yes 8800-00-01A
8Avaya Callmaster V and VI, Cisco IP phones R, M-, M+, R Yes 8800-00-37A
featureS beNefitS
Simple 8-position slide adjustment (QD to RJ9) No need for a user manual; simply slide until a dial tone is heard.
Standard RJ9 connector Connects to virtually all telephones using a standard modular plug.
Standard GN Quick Disconnect plug to headset Works with any GN Netcom headset equipped with Quick Disconnect.
Straight 80 cm / 31.5 inch straight cord Longer than many standard cords, yet at a competitive price.
Built-in low-current microphone amplifier Enables perfect operation with telephones that require extra signal gain such as Cisco,
Panasonic, Nortel, and Avaya, plus many IP telephones.
dc voltaGe
Maximum Voltage 10v DC
Minimum Voltage 1.6v DC
Nominal Voltage 5v DC
electrical SpecificatioN traNSMitter
Switch poSitioNS vS MicrophoNe GaiN
biaS voltaGe (MicrophoNe iNput)
Maximum Voltage 1.71v DC
Minimum Voltage 1.38v DC
Nominal Voltage 1.49v DC
iNSertioN GaiN
Maximum 12.5 dB
Minimum 10.5 dB
Nominal 11.5 dB
(preamp output i.e. positions 6-8)
*For details on compliance please visit www.jabra.com
dc curreNt
Maximum Current 2.5 mA
Minimum Current 280 uA
FeatUreS & BeneFitS