Jabra BT650S Instruction manual

For more information please visit
www.jabra.com
81-03077 A
NEED MORE HELP?
© 2009 GN Netcom US, Inc. all rights reserved. Jabra®
is a registered trademark of GN Netcom A/S. All
other trademarks included herein are the property
of their respective owners. The Bluetooth®word
mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by GN Netcom A/S is
under license. (Design and specifications subject
to change without notice).
www.jabra.com
Design Reg. pending international
MADE IN CHINA
TYPE: OTE5
Jabra HALO
BT650s
Quick Start Manual
for Apple®Products
www.jabra.com
Access website www.jabra.com/HALO
for full user manual
CUSTOMER CONTACT DETAILS:
www.jabra.com/nasupport
(for the latest support info and online
User Manuals)
1 [phone] (U.S.)
1 [phone] (Canada)

R
2. 3.
6.
EN NB: Chapter headings and illustrations
share the same number to aid
understanding.
PT Obs: Os cabeçalhos e as ilustrações do
capítulo usam o mesmo número para
auxiliar na compreensão.
FR Remarque : pour faciliter la compréhen-
sion, les en-têtes de chapitre et les illustra-
tions portent les mêmes numéros.
ES Nota: Para evitar confusiones, los encabe-
zados de los capítulos y las ilustraciones
tienen la misma numeración.
1.
2
L
1
3
4
5
3
5.4.
L

EN
IMPORTANT NOTE: Apple iPhone® and
iPod touch® supporting Bluetooth® stereo
streaming.
Apple®Inc. has released a Software Update
that enables Apple iPhone® 3G & 3GS and iPod
touch® (2nd generation) devices to wirelessly
via stream stereo music content from
the device to a headset that supports
the Advanced Audio Distribution Prole (A2DP).
Please note, that iPhone® Software Update
version 3.0 and or later is required to make
the headset work via . This software
needs to be purchased, as it is sold separately
(visit www.apple.com for more information and
purchasing).
Your Jabra HALO stereo headset
supports this A2DP prole which enables you
to listen to music streamed wirelessly from the
iPhone® or iPod touch® to the headset.
However, the iPhone® and iPod touch® devices
do not support the prole named Advanced
Video Remote Control Prole (AVRCP) to a full
extent. This prole enables remote control
functions from the headset like Play, Pause,
Stop, Track Forward, Track Backwards, Fast
Forward and Fast Backwards.

EN
This means that you have limited or no
AVRCP functionality from your Jabra HALO
headset towards either the Apple iPhone® or
iPod touch® - depending on which software
update you have installed:
- With Apple®software update version 3.0 you
have no AVRCP functionality from your Jabra
HALO headset towards either the Apple
iPhone® or iPod touch®
- With Apple®software update version 3.1
you have support for Play, Pause and Stop.
There is no support for Track Forward, Track
Backwards, Fast Forward, Fast Backwards.
Please note, that you can always answer and
end calls (and adjust the volume) directly from
the Jabra Headset if you have iPhone® Software
Update version 3.0 and or later installed on
your Apple iPhone® 3G & 3GS and iPod touch®
(2nd generation).

EN
1 About your Jabra HALO
Before using your new Jabra HALO headset, you
must fully charge it and set it up by ‘pairing’ it
with your Apple iPhone®or iPod touch®.
1 Answer/End or Play/Pause button
2 Volume Control or Track Change touch
sensor
3 Hinges for folding of headset
4 Battery indicator
5 Bluetooth® connectivity indicator
2 Charging your Jabra HALO
Make sure that your Jabra HALO is fully charged
before using it for the rst time. While charging,
the battery indicator light is solid red and when
fully charged the battery indicator light is solid
green. Charging time is approximately 2h. You
can use the Jabra HALO while charging it.
3 Turning your Jabra HALO on and o
Unfolding the headset will turn it on; Folding
the headset will turn it o.
1. To fold: Carefully extend the headset at the
hinges (3) and fold. The headset will now
conveniently fold into a compact size.
2. To unfold: Carefully unfold the headset and
lock the hinges into place.

EN
4 Pairing your Jabra HALO to the
iPhone® or iPod touch®
1.a. First time pairing
Unfold the headset and lock the hinges into
place so that the headset is turned on. The
Jabra HALO will automatically enter pairing
mode and search for a device.
1.b. Later pairing
Press and hold the Answer/End button (1) until
the indicator light (5) is solid blue (approxi-
mately 4 seconds).
2. Activate on your iPhone® or iPod
touch® device.
- From the Home screen, choose Settings >
General > Bluetooth and turn on, as
illustrated on the next few pages.

EN
2.a.
From the Home screen, choose Settings and
then select General

EN
2.b.
From the General screen select Bluetooth

EN
2.c.
The device now searches for nearby
devices.

EN
3. Choose Jabra HALO on your iPhone®/ iPod
touch® and conrm with PIN code 0000
(4 zeros).