Jabra Elite 65e User manual

Jabra Elite 65e - Titanium Black
How do I pair my Jabra Elite 65e with my mobile device?
To pair your Jabra Elite 65e with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Elite 65e by pressing and holding (3 seconds) the
Multi-function button until the LED flashes red and the neckband
vibrates.
3. To enter pairing mode, press and hold (3 seconds) the Multi-function
button until the LED flashes blue.
The headphones are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Elite 65e from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code. The
headphones will announce when they are paired and connected.
26/12/2023 13:25
https://www.jabra.com/supportpages/jabra-elite-65e/100-99020000-
02/faq/340fcb1c-5840-42e4-917d-c553add442d4
Page 1 of 2

Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
26/12/2023 13:25
https://www.jabra.com/supportpages/jabra-elite-65e/100-99020000-
02/faq/340fcb1c-5840-42e4-917d-c553add442d4
Page 2 of 2