Jabra Elite 75t Wireless Charging Titanium Black User manual

How do I pair my Jabra earbuds with my mobile device?
Jabra Elite 75t Wireless Charging - Titanium Black
To pair with your smartphone, tablet, or mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press and hold (1 second) the Left and
Right buttons.
The LEDs on both earbuds will flash green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LED on the right
earbud flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra earbuds from the list. Alternatively, wear the earbuds to hear the
voice guided instructions.
Enter “0000” (four zeros) if you are asked for a PIN.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
To pair with your smartphone, tablet, or mobile device using only the
right earbud, follow these steps.
06/04/2021 01:17
https://www.jabra.co.nz/supportpages/jabra-elite-75t/100-99092000-40/faq/8ec1bcdc-
9b43-465e-b2c8-1faac22ef6f8
Page 1 of 2

1. Turn on the Bluetooth setting on your mobile device.
2. Turn off the right earbud manually by pressing and holding the Right
button until the LED flashes red.
3. To enter pairing mode, press and hold (3 seconds) the Right button until
the LED flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra earbuds from the list. Alternatively, wear the earbud to hear the
voice guided instructions.
Enter “0000” (four zeros) if you are asked for a PIN.
If pairing is successful, your earbuds will appear in the list of connected
Bluetooth devices on your mobile device. The Bluetooth connection will
also be announced in the earbuds.
Note
Images are for guidance purposes only. The image displayed may differ
slightly from your device, however the content is still relevant and
accurate.
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
06/04/2021 01:17
https://www.jabra.co.nz/supportpages/jabra-elite-75t/100-99092000-40/faq/8ec1bcdc-
9b43-465e-b2c8-1faac22ef6f8
Page 2 of 2