Jabra Elite 3 User manual

User manual
Jabra
Elite 3

© 2021 GN Audio A/S. All rights reserved. Jabra®is a
trademark of GN Audio A/S. The Bluetooth®word mark and
logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by GN Audio A/S is under
license.
Declaration of Conformity can be found on
www.jabra.com/doc
Made in China
MODEL: OTE150ROTE150L
CPB155

3
ENGLISH
1. Welcome.........................................5
2. Jabra Elite 3 overview .................6
2.1 Included accessories
3. How to wear...................................8
3.1 Changing EarGels
4. How to charge............................ 10
4.1 Charging the earbuds
4.2 Fast charge the earbuds
4.3 Charging the charging case using USB
5. What the LEDs mean ............... 13
6. How to pair.................................. 15
6.1 Pairing with a mobile device
7. How to use ................................. 16
7.1 Power the earbuds o/on
7.2 Music controls
7.3 Call controls
7.4 Voice assistant controls
7.5 HearThrough
7.6 One-touch Spotify playback
7.7 Sidetone
7.8 Mono earbud use
7.9 Sleep mode

4
ENGLISH
7.10 Multiple call handling
7.11 Update firmware
7.12 Reset the earbuds
8. Jabra Sound+ app...................... 28
9. Support ........................................ 29
9.1 FAQ
9.2 How to care for your earbuds
9.3 Replacement accessories
9.4 Using replacement earbuds
9.5 Using a replacement charging case

5
ENGLISH
1. Welcome
Thank you for using the Jabra Elite 3. We hope
you will enjoy it!
Jabra Elite 3 features
• Powerful bass and customizable sound for life on
the go.
• 4-mic technology for clearly better calls.
• Sleek Danish design, with a premium finish.
• HearThrough lets you hear what’s going on
around you.
• Up to 7 hours battery in the buds, and a total of
28 hours with the case.
• Mono mode lets you use either earbud while the
other charges.
• Engineered for noise-isolation.
• IP55-rated rainproof protection, plus 2-year
warranty*.
• Alexa** on tap. Tap to ask Alexa, plus one-touch
Spotify playback***.
* Against failure from dust and water with Jabra Sound+ app
registration
** Alexa voice assistant and features only available for
Android devices version 6.0 or higher
*** Instant Alexa activation and one-touch Spotify playback
compatible with Android only

6
ENGLISH
2. Jabra Elite 3
overview
Jabra Elite 3 earbuds
Microphones
LED LED
Microphones
Left
button
Right
button
Charging case
Charging port
LED
LEFT EARBUD RIGHT EARBUD

7
ENGLISH
2.1 Included accessories
EarGels
L
SM
pre-mounted on
the earbuds
USB-C charging cable

8
ENGLISH
3. How to wear
Microphone
Carefully insert each earbud into your ear.
Position the microphones on the earbuds
towards your mouth.

9
ENGLISH
3.1 Changing EarGels
For the optimal audio experience, it is
recommended to try each of the different
EarGel sizes. The fit should feel light and
comfortable in your ear. The medium EarGels
are pre-mounted on the earbuds.
ML
S

10
ENGLISH
4. How to charge
The Jabra Elite 3 offers up to 7 hours of
battery and up to 28 hours with the charging
case and fast charge.
4.1 Charging the earbuds
Place the earbuds in the charging case and
close the lid. It takes up to 2 hours to fully
recharge the earbuds.
When the earbuds are removed from the
charging case, the LEDs on the earbuds will
light up red, yellow or green to indicate the
battery status of the earbuds. The LED on the
front of the charging case indicates the battery
status of the charging case.

11
ENGLISH
4.2 Fast charge the earbuds
Placing the earbuds in the charging case for 10
minutes when they are at low battery will fast
charge the earbuds, offering up to 60 minutes of
battery. Fast charging the earbuds requires that
the charging case has a minimum of 30% battery.
You can see the current battery status of the
earbuds using the Jabra Sound+ app.

12
ENGLISH
4.3 Charging the charging case
using USB
Plug the supplied USB-C charging cable into
the charging case and a USB-A power supply or
certified wall charger. It takes up to 3.5 hours
to fully charge the earbuds and the charging
case (depending on the charger used)
USB-C
It is recommended to use a power supply with
5V +-0.25V and maximum charging current
below 2A. It is not recommended to charge the
earbuds or charging case using a power supply
with a higher voltage.

13
ENGLISH
5. What the LEDs mean
High battery
Medium battery
Low battery
Critically low battery
(earbuds not charging)
LED LED
EARBUD STATUS
BAT TERY STATUS WHEN
DOCKINGUNDOCKING
EARBUDS
High battery/Power on
Medium battery
Low battery
Power off
Pairing
Resetting/
Firmware updating

14
ENGLISH
High battery
Medium battery
Low battery
Fully charged
CHARGING CASE STATUS
WHEN CONNECTED
WITH USB CABLE

15
ENGLISH
6. How to pair
6.1 Pairing with a mobile device
3 Sec
1. Power on the earbuds by removing them
from the charging case. Alternatively, press
the Left and Right buttons to power the
earbuds on.
2. Press and hold (3 sec) the Left and Right
buttons simultaneously until the earbud LED
flashes blue. The earbuds will now be ready
to pair to your phone.
3. Go to the Bluetooth settings on your
smartphone and select the Jabra Elite 3 from
the list of available devices to complete the
pairing.

16
ENGLISH
7. How to use
7.1 Power the earbuds o/on
Place the earbuds in the charging case to
power off. Remove the earbuds from the
charging case to power on.
To manually power off the earbuds, press both
the Left and Right buttons simultaneously, or
press and hold (5 sec) the Left or Right button
when in Mono mode.
To manually power on the left or right earbud,
press the Left or Right button.

17
ENGLISH
7. 2 Music controls
Left earbud Function Right earbud
Play/pause
music
Press the Right
button when not
on a call
Volume up Press and hold
the Right button
Press and hold the
Left button Volume down
Next track
Double-press
the Right button
when listening
to music
Restart track
or previous
track
Triple-press the
Right button
when listening
to music
Repeat to skip
to the previous
track

18
ENGLISH
7. 3 Call controls
Left earbud Function Right earbud
Press the Left or
Right button Answer call Press the Left or Right button
Double-press
the Left or Right
button
End/Reject call
Double-press
the Left or Right
button
Press the Left or
Right button
Mute/unmute
microphone
Press the Left or
Right button
Volume up Press and hold
the Right button
Press and hold the
Left button Volume down

19
ENGLISH
7.4 Voice assistant controls
Left button Voice Assistant
Activate Voice
assistant
(Siri, Google
Assistant,
Amazon Alexa*)
Double-press the
Left button when
not on a call
* Alexa voice assistant and features only available for Android
devices version 6.0 or higher

20
ENGLISH
7.5 HearThrough
HearThrough lets you pay attention to your
surroundings and engage in conversation,
when not on a call, without needing to remove
the earbuds. The microphones pick up
surrounding sounds and transmit them to the
speakers.
Left button HearThrough
Hearthrough
on/o
Press the Left
button when not
on a call