Jabra Elite 85t - Titanium Black User manual

Jabra Elite 85t - Titanium Black
How do I pair my Jabra Elite 85t with my mobile device?
To pair with your smartphone, tablet, or mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press the Left and Right buttons.
The LEDs on both earbuds will flash green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LED on the right
earbud flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Elite 85t from the list. Alternatively, wear the earbuds to hear
the voice guided instructions.
Enter “0000” (four zeros) if you are asked for a pin code.
If you pair with two mobile devices, use this process separately for each
mobile device. After pairing with both mobile devices, you will need to
reselect the Jabra Elite 85t in the Bluetooth settings on the first mobile
device. This will complete the pairing process for both mobile devices.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
13/08/2023 03:06
https://www.jabra.com/supportpages/jabra-elite-85t/100-99190700-
98/faq/d3b720c8-d5e8-45db-bf58-c24a62e25208
Page 1 of 2

To pair with your smartphone, tablet, or mobile device using only the
right earbud, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off the right earbud manually by pressing the Right button until
the LED flashes red.
3. To enter pairing mode, press and hold (3 seconds) the Right button
until the LED flashes blue.
The earbud is now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Elite 85t from the list. Alternatively, wear the earbud to hear the
voice guided instructions.
Enter “0000” (four zeros) if you are asked for a pin code.
If pairing is successful, your earbuds will appear in the list of connected
Bluetooth devices on your mobile device. The Bluetooth connection
will also be announced in the earbuds.
Note
Images are for guidance purposes only. The displayed image may differ
slightly from your device, however the content is still relevant and
accurate.
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
13/08/2023 03:06
https://www.jabra.com/supportpages/jabra-elite-85t/100-99190700-
98/faq/d3b720c8-d5e8-45db-bf58-c24a62e25208
Page 2 of 2