Jabra HALO SMART User manual

How do I pair my Jabra Halo Smart with my mobile device?
To pair your Jabra Halo Smart with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Halo Smart by pressing and holding the Multi-
function button until the LED flashes red.
3. To enter pairing mode, press and hold (7 seconds) the Multi-function
button until the LED flashes blue (minimum of 4 flashes).
Pairing mode is announced in the earbuds and the LED continues to
flash blue.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Halo Smart from the list.
30/01/2024 04:17
https://www.jabra.ie/supportpages/jabra-halo-smart/100-98300000-
60/faq/94c751f4-38e5-40c6-a334-57781241bde8
Page 1 of 2

Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
30/01/2024 04:17
https://www.jabra.ie/supportpages/jabra-halo-smart/100-98300000-
60/faq/94c751f4-38e5-40c6-a334-57781241bde8
Page 2 of 2