Jabra Elite Active 45e User manual

User manual
Elite Active 45e
Jabra

© 2019 GN Audio A/S. All rights reserved. Jabra®is a
trademark of GN Audio A/S. The Bluetooth®word mark and
logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by GN Audio A/S is under
license.
Declaration of Conformity can be found on
www.jabra.com/CP/US/doc
MADE IN CHINA
MODEL: OTE090

3
ENGLISH
1. Welcome.........................................4
2. Jabra Elite Active 45e overview 5
3. How to wear...................................6
4. How to charge...............................7
4.1 What the LEDs mean
5. How to connect.............................9
5.1 Power on/o
5.2 Pairing with a smartphone
6. How to use ................................. 11
6.1 Calls & music
6.2 Voice Assistant
6.3 Multiple call handling
6.4 Voice guidance
6.5 How to reset
6.6 Firmware update
7. Jabra Sound+ app...................... 17
8. Support ........................................ 18
8.1 FAQ
8.2 How to care for your earbuds

4
ENGLISH
1. Welcome
Thank you for using the Jabra Elite Active 45e.
We hope you will enjoy it!

5
ENGLISH
2. Jabra Elite Active 45e
overview
Power on/o (hold)
Play/pause music
Answer/end call
Bluetooth pair (hold)
Volume up
Next track (hold)
Voice Assistant
Mute microphone
Voice button
Multi-function button
Volume up button
Volume down button
Left
Right
Volume down
Previous track (hold)
Micro-USB charging
USB charging cable

6
ENGLISH
3. How to wear
The earbuds are worn with the cable behind
the neck and the earhooks behind each ear.
1. Insert the earbud into your ear canal,
ensuring the looped eargel fits into the ridge
of your ear, as illustrated.
2. Shape the earhook behind your ear for the
best fit. It may help to pre-shape the earhook
before wearing.

7
ENGLISH
4. How to charge
To charge the earbuds, connect a USB charging
cable to the USB charging port on the left
earbud. It is recommended to charge the
earbuds using the supplied Jabra charging
cable, however it is possible to charge the
earbuds using a compatible charger.
It takes approx. 2 hours to fully charge the
battery. If the earbuds are fully out of battery,
15 minutes of charging will give 1 hour of
battery.
Note: Always clean and dry the USB charging port before
charging the earbuds. It is recommended to recharge the
earbuds at least once a month.

8
ENGLISH
4.1 What the LEDs mean
Battery LED
Full
Medium
Low
Very low
Status LED
Power on
Power off
Pairing mode
Resetting

9
ENGLISH
5. How to connect
5.1 Power on/o
On: Press and hold (1 sec) the Multi-function
button. The LED will flash green and you will
hear a power on tone.
1 sec
Off: Press and hold (3 sec) the Multi-function
button. The LED will flash red and you will hear
a power off tone.
3 sec

10
ENGLISH
5.2 Pairing with a smartphone
1. Ensure the earbuds are powered off, and
then press and hold (3 sec) the Multi-
function button until the LED flashes blue
and you hear an announcement in the
earbuds.
3 sec
2. Go to the Bluetooth menu on your
smartphone and select the Jabra Elite Active
45e from the list of available devices.