Jabra Evolve 65t MS User manual

Jabra Evolve 65t MS
How do I manually reset my Jabra true wireless earbuds?
When you reset your Jabra true wireless earbuds, previously paired devices
and settings will be cleared.
Follow these steps to reset.
1. Ensure the right earbud is sufficiently charged and turned on.
If the earbud is in the charging case, you will need to remove it.
2. Press and hold (approximately 10 seconds) the Multi-function button
on the right earbud until the LED briefly flashes purple (note that the
LED will flash red before it flashes purple).
The earbuds have now been reset. The LED will automatically turn
green to indicate it is on and then blue to indicate pairing mode.
Before you re-pair your earbuds with your mobile device, remember to
delete the previous pairing in the Bluetooth menu. Refer to the user
manual of your mobile device for instructions.
Note
You can repeat these steps if you are unsuccessful or to verify the results.
02/04/2023 03:08
https://www.jabra.ie/supportpages/jabra-evolve-65t/6598-832-109/faq/14b29ba5-0f9d-
41a6-ba4d-71c1f00ad589
Page 1 of 2

Applicable products
Jabra Evolve 65t MS
Jabra Evolve 65t UC
Jabra Elite 65t -
Titanium Black
Jabra Elite 65t -
Copper Black
Jabra Elite 65t - Gold
Beige
Jabra Elite Active 65t
- Copper Blue
Jabra Elite Active 65t
- Titanium Black
Jabra Elite Active 65t
- Copper Black
Jabra Elite Active 65t
- Copper Red
02/04/2023 03:08
https://www.jabra.ie/supportpages/jabra-evolve-65t/6598-832-109/faq/14b29ba5-0f9d-
41a6-ba4d-71c1f00ad589
Page 2 of 2