Jabra GN9120 Flex User manual

Jabra GN9120 Flex Alcatel With EHS
How to connect my Jabra GN9120 EHS / GN9125 EHS with
Siemens OpenStage 30, 40, 60, 80
Prerequisite:
9120 EHS + Jabra LINK 14201-10
9125 EHS + Jabra LINK 14201-10
In combination with one of the following phones:
OpenStage 30/ 40 / 60 / 80
Full function from EHS version 1.40 (repeated dial tone signal)
Connection:
1. Plug the 1-sided end of the DHSG cable marked in blue into the socket
marked with the "headset" symbol on your OpenStage phone.
2. Insert the RJ9 plug into the socket with the "phone" symbol and the
RJ45 plug into the socket marked with "AUX" on the Jabra GN912x
base.
EHS setup:
28/06/2021 15:40
https://www.jabra.sg/supportpages/jabra-gn9120/9120-281-11/faq/fedb71fc-421c-46ae-
8b8c-1f91986e5f24
Page 1 of 4

The Jabra GN912x must support and be set up on DHSG EHS.
You can check or set it as follows:
1. Put the headset in the base.
2. Then press the PLUS and MINUS buttons simultaneously for 6 seconds
until the online display on the headset starts to flash.
3. The base will now display to you the EHS currently installed. The online
indicator light indicates "MSH", the pulsating light indicates "RHL", the
MUTE light "DHSG" and the battery display "AEI".
4. With the PLUS or MINUS buttons, you can now switch between the
different EHS types.
5. To confirm the EHS has successfully installed, the phone automatically
switches back to charge mode after approx. 10 seconds.
Base setup:
28/06/2021 15:40
https://www.jabra.sg/supportpages/jabra-gn9120/9120-281-11/faq/fedb71fc-421c-46ae-
8b8c-1f91986e5f24
Page 2 of 4

Set the phone set-up switch to "A".
Microphone level setup:
Please call someone with the headset.
1. On the headset you must now press the PLUS and MINUS buttons
simultaneously, which immediately produces a signal tone.
2. You can now increase the microphone volume with PLUS and decrease
it with MINUS.
3. To confirm, after approx. 10 seconds a low signal tone sounds. All the
settings are then automatically saved.
Phone setup:
28/06/2021 15:40
https://www.jabra.sg/supportpages/jabra-gn9120/9120-281-11/faq/fedb71fc-421c-46ae-
8b8c-1f91986e5f24
Page 3 of 4

Important: With equipment EHS 3.18, the headset operation must be set
up additionally at the phone.
OpenStage 40: Menu > Audio accessories > Headset > Cordless
OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless
Important: The dial tone signal in the headset will only transfer when the
standard ring tones are used on your phone. There is no dial tone signal
transfer for MP3 ring tones.
28/06/2021 15:40
https://www.jabra.sg/supportpages/jabra-gn9120/9120-281-11/faq/fedb71fc-421c-46ae-
8b8c-1f91986e5f24
Page 4 of 4