Jabra PanaCast 50 User manual
Wall Mount
Drill
Items included
Tools needed (not supplied in the pack)
Wall screws
Level
1
8 cm
Measure 8cm from the bottom of the screen to
the top of the Wall Mount. Using a pencil, mark
the screw holes on the wall, as illustrated.
1
Screw the Wall Mount to the wall using a drill
(screws not supplied).
2
2
3Attach the video bar to the Wall Mount. Screws
are not required.
Rotate the video bar down for easy access to
the ports.
4
3
Attach the relevant cables to the video bar..
5
HDMI IN HDMI OUT2 HDMI OUT1 USB-A
USB-C
ETHERNET
POWER
3.5MM JACK
USB-A
Screw the cable cover to the video bar using the
supplied screws.
6
4
Rotate the PanaCast 50 into its final position and
angle the camera to point at eye-level.
7
5
Measure 8cm from the top of the screen to the
bottom of the Wall Mount. Using a pencil, mark
the screw holes on the wall, as illustrated.
8 cm
Screw the Wall Mount to the wall using a drill
(screws not supplied).
1
2
6
3Attach the video bar to the Wall Mount. Screws
are not required.
Rotate the video bar down for easy access to
the ports.
4
7
HDMI IN HDMI OUT2 HDMI OUT1 USB-A
USB-C
ETHERNET
POWER
3.5MM JACK
USB-A
Attach the relevant cables to the video bar..
5
Screw the cable cover to the video bar using the
supplied screws.
6
8
Rotate the PanaCast 50 into its final position and
angle the camera to point at eye-level.
7
Other manuals for PanaCast 50
8
Table of contents
Other Jabra Speakers System manuals
