Jabra Speak 410 User manual

Speak 410
Jabra
User manual

2
ENGLISH
JABRA SPEAK 410 USER MANUAL
CONTENTS
WELCOME............................................................................................3
PRODUCT OVERVIEW......................................................................3
INSTALLATION....................................................................................4
CONNECTING .....................................................................................4
SETUP ...................................................................................................4
CALL FUNCTIONS .............................................................................4

3
ENGLISH
JABRA SPEAK 410 USER MANUAL
WELCOME
Congratulations on purchasing your new Jabra SPEAK 410. We are sure you will enjoy its range of
features and find it easy to use.
Jabra SPEAK 410 Features
• Wideband audio for exceptional sound quality.
• Omni-directional microphone.
• Fully integrated call controls for remote softphone operation.
• Call waiting (requires supported softphone with call waiting functionality).
• LED and audio indicators.
• Speed dial with the one-touch Smart button* (must be enabled in Jabra Direct. Requires supported
softphone with speed dial functionality).
PRODUCT OVERVIEW
Mute
Decrease
speaker/ringtone
volume button
Set ringtone volume
(press and hold 2 seconds)
Increase speaker/
ringtone volume
End call
Answer call
Smart button
(Speed dial)
*Newer Speak 410 variants (with the Smart button) have a Ver. ID beginning with B, or later. Older Speak
410 variants (without the Smart button) have a Ver. ID beginning with A.
The Ver. ID can be found on the bottom of the Speak 410.

4
ENGLISH
JABRA SPEAK 410 USER MANUAL
INSTALLATION
Jabra Direct
Jabra Direct is software designed to support the Jabra SPEAK 410.
Download and install Jabra Direct from www.jabra.com/direct.
CONNECTING
To connect the Jabra SPEAK 410, connect the USB cable attached to the speakerphone to any available
USB port on a PC or power-supplied hub. The Jabra LED will light up white to indicate the speakerphone
is connected and powered on.
Note: The speakerphone must be connected to a PC USB port or power-supplied hub, and not a bus-
powered USB port (such as a keyboard with an integrated USB).
SETUP
When the Jabra SPEAK 410 is connected to a PC, Windows will automatically configure the
speakerphone as the default audio device.
To manually change the default audio device in Windows:
1. Click on Windows Start and then launch Windows Control Panel.
2. Open Sound and Audio Devices, and select the Audio tab
3. Under Sound Playback, and Sound Recording, set the preferred audio device as the default device.
Click apply to save the settings.
CALL FUNCTIONS
Basic functions
Event Action
Make a call Dial the phone number using the PC (soft-
phone)
Answer an incoming call Tap the green handset button
End a current call, or reject an incoming
call Tap the red handset button
Speed dial (o by default) Tap the Smart button (use Jabra Direct to
enable speed dial)
Mute/un-mute the Microphone
Tap the mute button to toggle between mute/un-mute. When muted, all LEDs will light up red. When the
speakerphone is ringing, or when a call is ended, the microphone will always be un-muted.
Increase/decrease Speaker Volume
Tap (or press and hold) the + / – buttons.
The speakerphone volume has a twelve-step scale, indicated by twelve white LEDs arranged in a circle
on the speakerphone.

5
ENGLISH
JABRA SPEAK 410 USER MANUAL
Increase/decrease Ringtone Volume
1. Press and hold the Jabra button for 2 seconds. The LEDs will light up yellow, and the
speakerphone will play the current ringtone volume.
2. Tap (or press and hold) the + / – buttons to adjust the ringtone volume.
3. Tap the Jabra button, or do not press any buttons for 2 seconds, to apply the new ringtone volume.
Note: When the speakerphone is ringing, tap (or press and hold) the + / – buttons to increase/decrease
the ringtone volume.
Call Waiting
Call waiting allows a current call to be placed on hold, and an incoming call to be answered. Additionally,
it is possible to switch between the held call and the current call. Supported softphones with call
waiting functionality only.
Event Action
Accept incoming call, and put current call on hold Tap the green handset button
Reject incoming call, and remain on current call Tap the red handset button
Switch between current call, and call on hold Tap the green handset button
End current call, and switch to call on hold
Tap the red handset button ,
and then tap the green handset button
Listening to Music
To listen to music played on a PC using the speakerphone, the Jabra SPEAK 410 must be set as the
default audio playback device in Windows.
1. Launch Windows Control Panel, and double-click Sound and Audio Devices.
2. Select the ´Audio´ tab, and set the Jabra SPEAK 410 as the default sound playback device . Click apply
to save your settings.
Music played on the PC will now play through the connected speakerphone.

6
ENGLISH
JABRA SPEAK 410 USER MANUAL
32-00697 J
© 2010 GN Audio A/S. All rights reserved. Jabra®is a trademark of GN Audio A/S.
All other trademarks included herein are the property of their respective owners.
(Design and specifications subject to change without notice).
Made in China
MODEL: PHS001U
Declaration of Conformity can be found on
www.jabra.com/CP/US/doc