Jabra Speak 810 User manual

User manual
Speak 810
Jabra

4
ENGLISH
Jabra Speak 810
1. Welcome
Thank you for using the Jabra Speak 810. We
hope you will enjoy it!
Jabra Speak 810 features
Zoom Talk microphone with adaptive
directionality 5 m/15 ft. range (15 persons)
Connectivity: USB, BT/NFC & 3.5 jack
Built-in tablet & mobile phone charging port
Option to attach a Kensington lock

5
ENGLISH
Jabra Speak 810
2. Speaker overview
Volume down
button
Mute button
Volume up
button
USB cable
NFC zone
Answer call
button
End/reject call button
Bluetooth button
Power supply port
Power supply 3.5 mm jack cable
Tablet & mobile
phone charging port
Cable slots

6
ENGLISH
Jabra Speak 810
3. How to position
For the best audio quality:
Place the Jabra Speak 810 onto a flat surface,
ideally in the center of the meeting group.
Do not cover the speaker with stickers or
labels.
Do not balance the Jabra Speak 810 on top
of cables. Use the cable slots on the base.
Ensure to adjust the speaker volume to best
suit your needs.

7
ENGLISH
Jabra Speak 810
4. Connect to power
Plug the power supply into the power supply
port on the base of the Jabra Speak 810, secure
the cable in the cable slot, and then connect to
power.
4.1 Charging your phone or tablet
You can charge your mobile phone or tablet by
using the Mobile charging port on the Jabra
Speak 810.
Power supply
port

8
ENGLISH
Jabra Speak 810
5. How to connect
5.1 Connect to USB device
1. Ensure the Jabra Speak 810 is connected to
power using the power supply.
2. Plug the attached USB cable into any USB
port on your PC.

9
ENGLISH
Jabra Speak 810
5.2 Connect to headset port on mobile
device
1. Ensure the Jabra Speak 810 is connected to
power using the power supply.
2. Plug the attached 3.5 mm jack cable into the
headset port on your mobile device.

10
ENGLISH
Jabra Speak 810
5.3 Pair to Bluetooth device
1. Ensure the Jabra Speak 810 is connected to
power using the power supply.
2. Tap the Bluetooth button on the Jabra Speak
810, and follow the voice-guided connection
instructions.
3. Select the Jabra Speak 810 from the list of
devices on your mobile device Bluetooth list.
®
Reconnecting
The Jabra Speak 810 is designed to be used in
rooms where many people may access the unit.
Therefore, it does not automatically reconnect
to known devices – you must reconnect
manually. The Jabra Speak 810 can remember
up to 900 devices in the pairing list. However,
there can be only one active Bluetooth
connection at a time.

11
ENGLISH
Jabra Speak 810
Manual disconnect
To manually disconnect your Bluetooth device
from the Jabra Speak 810, tap the Bluetooth
button on the Jabra Speak 810.
Permanent connection
To permanently connect a Bluetooth device to
the Jabra Speak 810, follow the steps above
and then hold the Bluetooth button for 8
seconds until a permanent connection is
announced.
To disconnect a permanent connection, hold
the Bluetooth button for 8 seconds.

12
ENGLISH
Jabra Speak 810
5.4 Connect to NFC-enabled device
1. Ensure the Jabra Speak 810 is connected to
power using the power supply.
2. Slide your NFC-enabled device directly
against the NFC zone on the Jabra Speak 810
until a connection is confirmed on your
mobile device.
NOTE: To disconnect your NFC-enabled device from the
Jabra Speak 810, slide it directly against the NFC zone on
the Jabra Speak 810.