Jabra Speak 810 User manual

User manual
Speak 810
Jabra

Declaration of Conformity can be found on
www.jabra.com/CP/US/declarations-of-conformity
MADE IN CHINA
MODEL:PHS004W
© 2015 GN Audio A/S (GN Netcom A/S). All rights reserved.
Jabra®is a trademark of GN Audio A/S (GN Netcom A/
S). The Bluetooth®word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Audio A/S (GN Netcom A/S) is under
license. Other trademarkws and trade names are those of
their respective owners.

3
ENGLISH
Jabra Speak 810
Contents
1. Welcome.........................................4
2. Speaker overview..........................5
3. How to position.............................6
4. Connect to power.........................7
4.1 Charging your phone or tablet
5. How to connect.............................8
5.1 Connect to USB device
5.2 Connect to headset port on mobile device
5.3 Connect to Bluetooth device
5.4 Connect to NFC-enabled device
5.5 Connect to Jabra Link 360
6. How to use .................................. 13
7. Software ...................................... 14
7.1 Jabra Direct
7.2 Update Jabra Speak 810 firmware
8. Support ........................................ 15
8.1 faq
8.2 How to care for your Jabra Speak 810
9. Technical specifications ........... 16

4
ENGLISH
Jabra Speak 810
1. Welcome
Thank you for using the Jabra Speak 810. We
hope you will enjoy it!
Jabra Speak 810 features
Zoom Talk microphone with adaptive
directionality 5 m/15 ft. range (15 persons)
Connectivity: USB, BT/NFC & 3.5 jack
Built-in tablet & mobile phone charging port
Option to attach a Kensington lock

5
ENGLISH
Jabra Speak 810
2. Speaker overview
Volume down
button
Mute button
Volume up
button
USB cable
NFC zone
Answer call
button
End/reject call button
Bluetooth button
Power supply port
Power supply 3.5 mm jack cable
Tablet & mobile
phone charging port
Cable slots

6
ENGLISH
Jabra Speak 810
3. How to position
For the best audio quality:
Place the Jabra Speak 810 onto a flat surface,
ideally in the center of the meeting group.
Do not cover the speaker with stickers or
labels.
Do not balance the Jabra Speak 810 on top
of cables. Use the cable slots on the base.
Ensure to adjust the speaker volume to best
suit your needs.

7
ENGLISH
Jabra Speak 810
4. Connect to power
Plug the power supply into the power supply
port on the base of the Jabra Speak 810, secure
the cable in the cable slot, and then connect to
power.
4.1 Charging your phone or tablet
You can charge your mobile phone or tablet by
using the Mobile charging port on the Jabra
Speak 810.
Power supply
port

8
ENGLISH
Jabra Speak 810
5. How to connect
5.1 Connect to USB device
1. Ensure the Jabra Speak 810 is connected to
power using the power supply.
2. Plug the attached USB cable into any USB
port on your PC.

9
ENGLISH
Jabra Speak 810
5.2 Connect to headset port on mobile
device
1. Ensure the Jabra Speak 810 is connected to
power using the power supply.
2. Plug the attached 3.5 mm jack cable into the
headset port on your mobile device.

10
ENGLISH
Jabra Speak 810
5.3 Connect to Bluetooth device
1. Ensure the Jabra Speak 810 is connected to
power using the power supply.
2. Tap the Bluetooth button on the Jabra Speak
810, and follow the voice-guided connection
instructions.
3. Select the Jabra Speak 810 from the list of
devices on your mobile device Bluetooth list.
NOTE: To disconnect your Bluetooth device from the Jabra
Speak 810, tap the Bluetooth button on the Jabra Speak 810.
®
To permanently connect a Bluetooth device to the Jabra
Speak 810, follow the steps above and then hold the
Bluetooth button for 8 seconds until a permanent
connection is announced.
To disconnect a permanent connection, hold the Bluetooth
button for 8 seconds.