Jabra SPEAK 510 User manual

Speak 510
Jabra
User manual

4
ENGLISH
1. Welcome
Thank you for purchasing the Jabra Speak 510.
We hope you will enjoy it!
JABRA SPEAK 510 FEATURES
Answer, end, reject and mute calls.
Connect to computer via USB or Jabra Link 370.
Connect wirelessly to mobile device via
Bluetooth.
Portable design.
Omni-directional microphone.
Wideband audio for exceptional sound
quality.
LED, audio indicators and voice guidance.
Up to 15 hours talk time.
Interact with your voice assistant (phone
dependent) or speed dial with the one-touch
Smart button* (must be enabled in Jabra
Direct).
*Newer Speak 510 variants (with the Smart button) have a
Ver. ID beginning with D, or later. Older Speak 510 variants
(without the Smart button) have a Ver. ID beginning with A,
B, or C.
Newer Speak 510+ variants (with the Smart button) have a
Ver. ID beginning with F, or later. Older Speak 510+ variants
(without the Smart button) have a Ver. ID beginning with A,
B, C, or D.
The Ver. ID can be found on the bottom of the Speak 510.

5
ENGLISH
2. Speaker overview
On/O
Answer call
Volume
down
Bluetooth Battery level
Mute microphone
End/reject call
Smart button*
Volume up
Supplied with
Jabra Speak 510+ only
Jabra Link 370
*Nyare Speak 510-modeller (med Smart-knapp) har ett ver.- ID som
börjar med D, eller senare. Äldre Speak 510-modeller (utan Smart-
knapp) har ett ver.- ID som börjar med A, B eller C.
Nyare Speak 510-modeller (med Smart-knapp) har ett ver.-
ID som börjar med F eller senare. Äldre Speak 510-modeller
(utan Smart-knapp) har ett ver.- ID som börjar med A, B, C
eller D.
Ver.- ID finns nertill på Speak 510.

6
ENGLISH
2.1 Turn on the jabra speak 510
Plug the Jabra Speak 510 USB cable into any
available USB port on your computer, or
Press and hold (2 secs) the On/Off button to
turn the Jabra Speak 510 on or off.
2.2 Charging the Jabra Speak 510
Plug the Jabra Speak 510 USB cable into any
available USB port on your computer to charge
the battery. The battery light is red when
charging, and green for 1 minute when fully
charged.

7
ENGLISH
3. Connecting
1. Plug the Jabra Speak 510 USB cable into any
available USB port on your computer.
2. Select the Jabra Speak 510 as the default
audio device in Windows Control Panel
sound settings, and in your softphone audio
settings.