Jackson Grills JPG50 User manual

Version: MAY17
Owner’s Manual for JPG50
Important Notice
Please read ALL safety notices on Pg. 1-2
before assembling or operating this grill.

1
!WARNING!
1. Do not store or use gasoline or
other flammable liquids or vapors in
the vicinity of this or any other
appliance.
2. An LP cylinder not connected for
use shall not be stored in the vicinity
of this or any other appliance.
!WARNING!
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from
the appliance and immediately call
your gas supplier or your fire
department
CERTIFICATION AND SAFETY
This appliance has been tested by LabTest Certification Inc. and has been tested to ANSI Z21.58-2007/
CSA 1.6-2007 + Addenda 1 (2008).
NOTE: The use and installation of this product must conform to local codes or, in the absence of local
codes, with either the National Fuel Gas Code, ANSI A223.1/NFPA S4, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and Handling code, B149.2, or the Standard for
Recreational Vehicles, ANSI A 119.2/NFPA 1191, and CSA Z240 RV Series, Recreational Vehicle
Code, as applicable.
SAFETY FIRST:
Read and understand all warning and precautions prior to operating your portable gas grill.
DANGER:
To prevent fire or explosion hazard always perform a Leak Test.
1. Always perform a “LEAK TEST” before lighting this portable gas grill, each time the cylinder
is connected for use.
2. NO SMOKING. Do not use or permit sources of ignition in the area while conducting a leak
test.
3. Conduct the leak test outdoors in a well ventilated area.
4. Do not use matches, lighters, or any open flame to perform a leak test.
TO CHECK FOR LEAKS:
Make 2 or 3 OZ. of leak solution by mixing 1 part liquid dish soap with three parts water.
1. Make sure the gas control knob is off.
2. Spoon several drops of this solution at the cylinder to the regulator valve connection.
3. Inspect the solution at the connection, looking for bubbles. If NO bubbles appear, the
connection is secure. If bubbles appear, you have a leak.
4. Disconnect the cylinder and reconnect, making sure the connection is secure.
5. Retest with soap solution, if you continue to see bubbles, replace the cylinder.

2
WARNING:
1. This portable grill is for outside use only, and shall not be used in any building, garage or enclosed
area.
2. This portable grill is set up from the factory for use with Propane Gas only. (LP Propane Cylinder
not included).
3. Do not use gasoline, kerosene, or alcohol for lighting!! The LP gas supply cylinder must be
constructed and marked in accordance with the specifications for LP-gas cylinders of the US
Department of transport (DOT) CFR 49 or the National Standards of Canada, CAN/CSA B339,
Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods.
4. Always open the grill lid slowly and carefully as heat and steam trapped within the grill can cause
severe burns.
5. Always place your grill on a hard level surface away from combustible materials. An asphalt or
blacktop surface may not be an acceptable surface for this purpose. See page 5 for details.
6. Do not attempt to move this Portable grill while lit.
7. Do not leave a lit grill unattended. Keep children and pets away form this grill at all times.
8. Do not use this grill unless it is COMPLETELY assembled and all parts are securely fastened and
tightened.
9. To prevent liquid propane from entering the regulator valve and causing a possible hazard, make
sure during installation and use, the propane cylinder is lower than the regulator valve / regulator.
10. Do not use the portable grill in an explosive area. Keep grill area clear and free from combustible
materials, gasoline and other flammable vapors and liquids.
11. Do not alter this grill in any manner.
12. Do not touch any metal surfaces on this grill until it has completely cooled to avoid burns, unless
wearing protective gear. (Pot holders, gloves, BBQ mittens, etc.)
13. It is essential to keep the portable grills valves compartment, burners, and circulating air passages
clean and free of obstructions. Inspect the grill before each use.
DANGER:
➢Do not store any spare LP cylinders within 10 feet of this portable grill.
➢Liquid propane (LP) gas is flammable and hazardous if not handled correctly. Become aware of
the characteristics before using any propane (LP) product.
➢LP characteristics: Flammable, explosive under pressure, heavier than air, and settles and pools in
low areas.
➢In its natural state propane (LP) has no odor. For your safety and odorant has been added that
smells like rotten eggs.
➢Contact with propane (LP) gas can cause freeze burns to your skin.
➢This portable grill is shipped from the factory for use with (LP) gas use only.
➢Never use an (LP) cylinder with a damaged body.
➢Dented and rusted (LP) cylinders may be hazardous and should be checked by a LP gas supplier.

3
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU ARE ASSEMBLING THIS UNIT FOR
SOMEONE ELSE, GIVE THIS MANUAL TO HIM OR HER FOR FUTURE REFERENCE.
CONNECTING GAS CYLINDER:
This grill is designed to operate with a (DOT-39 Cylinder) one pound 7-3/8” High Disposable / 16.4 oz
propane gas cylinder. DO NOT ATTEMPT TO REFILL ANY DISPOSABLE GAS CYLINDERS!! The LP-
gas supply cylinder to be used must be constructed and marked in accordance with the National
Standards of Canada, CAN/CSA-B339, Cylinders, spheres, and tubes for the Transportation of
Dangerous Goods. Only cylinders marked “Propane” may be used. The gas cylinder should not be
dropped or handled roughly!! If the appliance is not in use, the gas cylinder must be disconnected.
Storage or this Portable grill is permissible only if the LP cylinder is disconnected and removed from the
appliance. Cylinders must be stored outdoors out of reach of children and must not be stored in a
building, garage, or any enclosed area. Your cylinder must not be stored in an area where the
temperature can reach over 125 degrees F. Before connection, be sure that there is no debris caught in
the head of the gas cylinder, head of the regulator valve, or in the head of the burner or burner ports.
Lubricate the threads of the regulator valve with petroleum jelly, insert the gas cylinder into the
regulator valve and hand tighten firmly. Disconnect the gas cylinder when the appliance is not in use.
DO NOT obstruct the flow of combustion air and ventilation air to this portable grill.
TABLE OF CONTENTS
CERTIFICATION & SAFETY INFORMATION 1-3
TABLE OF CONTENTS 3
OWNER REGISTRATION 4
DIMENSIONS 5
CLEARANCES 5
UNPACKAGING YOUR GRILL 6
TOOLS REQUIRED FOR ASSEMBLY 6
PREPARING YOUR GRILL FOR OPERATION 7
LIGHTING INSTRUCTIONS 8
CLEANING AND MAINTENANCE 9
PARTS LIST AND EXPLODED VIEW 10 & 11
WARRANTY 12

4
Special Message to Our Customers:
All of us at Jackson thank you, for choosing a Jackson Grill! This appliance was intelligently designed,
engineered, and built with quality components that we are confident will provide you with years of
excellent operation. Please take the time to read the entire manual and familiarize yourself with all the
features of the Jackson Grill. This manual also contains important safety information and operation
instructions. Please write your barbecue’s serial # in the space below, and ensure that this manual
remains handy to the barbeque for quick reference.
To obtain replacement parts for your Jackson Grill, contact your local dealer. If you have any questions
please call us anytime at the number below: (Please have your model and serial number at hand)
Grill Model: JPG50
Serial Number: ___________________
Write your serial number here for future reference.
OWNER REGISTRATION: Please take the time to fill out and return a Warranty Registration Card, or
on-line at www.jacksongrills.com or simply fill in the form below and mail or fax to: (Thank you for
your help!)
Jackson Grills Customer Support (Tel): 1 [phone] or
#106-2480 Mt. Lehman Rd. Customer Support (E-mail): [e-mail]
Abbotsford, BC. Fax: [phone]
Canada V4X 2N3 Parts Ordering: Contact your Dealer
Please complete and return within 10 days. Thank you.
Title: Mr. Mrs. Ms. Miss (Circle One)
First Name:
Initial:
Last Name:
Street:
Apt. #:
City:
State/Prov.:
Zip/Postal:
Phone:
Email:
Date Purchased:
Dealer:
Model:
Serial #:
Comments:
Dear Grill Owner; please keep this manual for future reference.

5
DIMENSIONS
CLEARANCE TO COMBUSTIBLES
Keep all combustible surfaces at least 12 inches (30.24 cm) away from the grill at all times. Do not use
this appliance under overhead combustible surfaces.
Please Note: These clearances are distances to prevent combustion. These are not clearances to
warping, discolouring, melting, etc. Please use caution and discretion when operating near
combustible material.
CAUTION:
Use only the gas pressure regulator supplied with this appliance. This regulator is set
for an outlet pressure of 11” wc. If a replacement is necessary, please call your local dealer
or distributor. The use of unauthorized parts can create unsafe conditions or environment.

6
UNPACKAGING YOUR GRILL
Your portable grill has been factory assembled. However, there are still some items that must be
unpacked and placed in to the correct location. For assembly instructions please refer to the next
page, PREPARING YOUR GRILL FOR OPERATION.
PARTS LIST:
1 Firebox Complete
1 Handles
1 AA/AAA Battery for Ignition Module
1 Flavor Shield
1 Cooking Grid
1 Drip cup (Grease Cup)
1 Owners Operators Manual
TOOLS REQUIRED FOR ASSEMBLY:
1 X SMALL Crescent Wrench
Please ensure all components have been supplied with this appliance before assembly or operation
begins.
Please remove all packaging materials before using this portable grill.
DO NOT THROW AWAY ANY OF THE PACKAGING UNTIL YOU HAVE CONFIRMED ALL PARTS
WERE SUPPLIED.

7
PREPARING YOUR GRILL FOR OPERATION
STEP 1:
With the hood closed and latch in the closed position, lay the portable grill on its back and flip down the
fold down leg system.
STEP 2:
Place the unit in the upright position and screw in the supplied portable regulator. Do not over tighten;
finger tight is sufficient, but the fitting can be LIGHTLY tightened with a small crescent wrench.
STEP3:
Make sure a battery (supplied) is installed in the ignition module. To do so, unscrew the black igniter
button by turning it counter clockwise. The igniter only works if the battery is installed in the correct
direction.
Flip down the fold down
leg system.
Screw the portable regulator
into the side of the control
box. Do not over tighten.

8
LIGHTING INSTRUCTIONS
Open the lid before lighting the portable grill. Make sure there are no obstructions of air flow to the grill.
Spiders and insects can nest within the burner and clog the burner, venturi tube and the gas orifice.
Clean the burner ports by using a stiff wire brush, paper clip or stiff pipe cleaner. Make the gas control
knob is turned to the OFF position. Turn the regulator valve to the highest setting and depress the
igniter button until burner lights. After the appliance has lit, please observe the burner flame, make sure
all burner ports are lit and that the flame is constant and no longer than 2” inches in length.
If the burner does not light before 7
seconds of clicking, turn the regulator to the OFF
position and wait 5 minutes for the gas to clear
before trying again.
If the burner flame goes out while the unit is
operating turn the unit OFF immediately, open the
lid to clear out any gas.
Turn off LP supply at cylinder when appliance is
not in use.
Operate the grill for the first time approximately for 15 minutes before you use the grill to cook food.
This will burn off any residues from the assembly process.
Clean your grill after each use. Do not use any abrasive cleaners, or flammable cleaners. This could
damage the surfaces of this grill.
Regulator Valve
“OFF” position
Igniter
Regulator Valve
Lighting Position

9
Remember to clean your grease cup
out on a regular basis and always
before you transport the grill.
CLEANING AND MAINTENANCE
CAUTION:
Most cleaning and maintenance should be done while the unit is completely cold. Burning off the grill on
high for about 5 minutes after each use will keep excessive food residue from building up.
Cooking surface cleaning:
Clean the cooking surface with a stiff brass bristle brush after each use while burning it off.
Outside surfaces cleaning:
Use mild dish soap and hot water to clean the outside of the grill.
Do not use any abrasive cleaners or scouring pads on this appliance as this will scratch the outside
surface of the portable grill. Use a spray on stainless steel cleaner to add shine to the exterior stainless
steel.
NOTE: Always use a soft cloth and wipe in the direction of the grade of the stainless steel.
Interior firebox maintenance:
Remove the cooking grid, flame diffuser and the burner from the grill. Remove excess residue using a
brush, scraper and or cleaning pad. Spray the inside of the firebox with stainless steel-friendly
degreaser and let stand for 5 minutes. Use a toothbrush to loosen up grease and food residues. Wipe
out firebox with a paper towel or rag.
NOTE: Make sure all of the degreaser is wiped dry and let the grill air out with the lid open for 15
minutes before using.
Burner maintenance:
Clean the exterior burner surface with a stiff brass bristle brush. Make sure all of the burner port holes
are free of obstruction by using a large paperclip to poke the holes out. This is extremely important to
prolong the lifespan of the stainless steel burner.
Flame diffuser maintenance:
Remove residue using a brush, scraper and or cleaning pad. This
will reduce flare ups and prevent premature break down.