Jaclyn Smith Avondale High Bistro User manual

1
OWNER’S MANUAL
AVONDALE HIGH BISTRO
Product code: 0-02639993-1
UPC code: 095457142786
Date of purchase: _____/ _____/ _____

High Bar Table
Item# S47A81
Assembly Instructions
Description QTY
C
D
E
Part List
Item No.
A
B
Allen Driver
Washer
Table Top 1
1
4
F
1
G
Leg
Leg Support
4
16mm Bolt
Screw 4
4
2
Fig. 1
3. Turn table over to upright position. (See Fig. 3)
Your table is now ready to use.
Fig. 2
Fig. 3
2. Attach the leg support B to the legs C using four
16mm bolts E and four washers F. (See Fig. 2A).
Attach the legs to the top rim using four screws D.
(See Fig. 2B). Tighten all bolts securely.
TIGHTEN BOLTS COMPLETELY AND VERIFY
THAT ALL PARTS ARE SECURELY FASTENED
BEFORE USE.
CAUTION!
Injury may result if the bolts are not securely
fastened. Tighten the bolts frequently.
D
C
C
C
C
A
F
E
B
C
C
C
C
1. Lay table top A upside down on a non-abrasive
surface. Insert legs C into the table leg sleeves of the
top rim A. (See Fig. 1)
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.
Made in China
Fig. 2
BEFORE YOU START:
Check package for completeness using the parts list. Carefully remove all
packing material and place items on a clean, non-abrasive surface.
For best results, use a power drill to tighten all bolts. Do not over-tighten.

Part Description
ATABLE TOP
BLEG SUPPORT
C
E
DSCREW
FWASHER
G
16MM BOLT
LEG
ALLEN DRIVER
HADJUSTABLE FOOT
A
B
G
H
C
D
E
F
3
REPLACEMENT PARTS LIST
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.

High Bar Chair
Assembly Instructions
Item# S13A26
The provided parts are for 2 chairs.
Description QTY
C
D
E
Part List
Item No.
A
B
13mm Bolt
Seat Cushion
Chair Back 2
4
8
16
F
Chair Arm
Allen Driver 1
Chair Support
G
H
I
Chair Seat 2
2
30mm Bolt
28
16mm Bolt
4
J
2
Washer
Fig. 1
1. Attach chair back A to the chair arm B-R
using a 30mm bolt H and a washer I. (See
Fig. 1A).
2. Attach chair seat C to the chair arm B-R and
chair back A using two 13mm bolts F, two
16mm bolts G and four washers I. (See Fig.
1B and 1C).
3. Attach chair support D to the chair arm B-R
and chair back A using two 16mm bolts G
and two washers I. (See Fig. 1D).
4. Repeat for the other leg B-L.
4. Attach the seat cushion E by snapping the
straps around the chair seat. (See Fig. 2).
Your chair is now ready to use.
TIGHTEN BOLTS COMPLETELY AND
VERIFY THAT ALL PARTS ARE SECURELY
FASTENED BEFORE USE.
CAUTION!
Injury may result if the bolts are not securely
fastened. Tighten the bolts frequently.
Fig. 2
Fig. 1D
B-R
B-L
A
C
D
G
I
Fig. 1C
F
I
G
I
I
F
I
G
E
Fig. 1B
Fig. 1A
HI
For customer service, please call toll free
1-800-585-9969, 9:00 am - 5:00 pm
(Pacific Time), Monday through Friday.
Made in China
4
BEFORE YOU START:
Check package for completeness using the parts list. Carefully remove all
packing material and place items on a clean, non-abrasive surface.
For best results, use a power drill to tighten all bolts. Do not over-tighten.

Description
CHAIR BACK
CHAIR RIGHT ARM
CHAIR LEFT ARM
CHAIR SEAT
13MM BOLT
16MM BOLT
30MM BOLT
WASHER
ALLEN DRIVER
SEAT CUSHION
FRONT FOOT CAP
BACK FOOT CAP
CHAIR SUPPORT
Part
A
B-R
B-L
D
C
E
F
G
H
J
I
K
L
5
E
K
A
B-L
B-R
C
H
J
I
L
G
D
F
REPLACEMENT PARTS LIST
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.

6
Please refer to part numbers when reordering
For questions or comments about product:
Call toll-free: 1-800-585-9969 Monday-Friday 9AM-5PM (Pacific Time)
Made in / Hecho en CHINA for Kmart Corporation, Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com