Jaclyn Smith Marion 5pc User manual

Marion 5pc Seating Set
Product code: 0-07566275-9
UPC code: 769455 770004
Vendor Item: SC-K-637/5
Date of purchase: _____/ _____/ _____
1
USE AND CARE GUIDE

Thank you for your purchase
Thank you for your purchase
We are pleased that you have chosen Kmart for your outdoor furniture purchase.
We hope that you enjoy the unmatched quality, comfort, and style of your new patio
set. Every piece is meticulously considered all the way down to the smallest details,
exclusively for you, by our world class design team. We know you have a choice when
it comes to your patio furniture needs, so from our team to yours, thank you for letting us
be a part of your outdoors.
Table of Contents
Table of Contents.................................... 2
Safety Information................................... 3
Set Up your Furniture Properly..............3
Examine your furniture..........................3
Warranty................................................... 3
Care and Maintenance............................ 4
Pre-Assembly...........................................4
Planning Assembly.............................. 4
Observe weight Limits......................... 4
Hardware Included.............................. 4
Assembly Instructions
Package Contents................................. 5
Chair....................................................... 5
Table........................................................7
Ottoman ................................................ 10
Customer Service................................. 10
2

Safety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per the instructions.
When placing in the desired location, ensure that all legs are resting on the same
surface. You may adjust the legs levelers as required to ensure that the item stands
in a rigid position.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found,
they must be retightened fully before additional use.
Warranty
WARRANTY
We warrant our products to be free of manufacturing defects to the original purchaser for
the period listed below. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.
EXCLUSIONS
This warranty does not cover: Furniture used for commercial or non-residential purposes;
failures caused by improper care; unreasonable or abusive use; freeze damage; acts of
nature. Steel products are not covered against rust. Tempered glass table tops are not
covered against breakage.
FINISH
Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FABRIC
Fabric is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FRAMES
Frame is warranted to be free from defects in material or workmanship for a period of
two (2) years for steel frame.
FREIGHT & PACKAGING
Freight and packaging are the responsibility of the original purchaser.
CUSTOMER SERVICE
3
In case of a problem, call 1-800-457-4652 between 9:00 am to 5:00 pm Eastern standard
time Monday through Friday or contact us at www.numarkcustomerservice.com for
any question or problems you may have.

Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
4
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Chair: 225 lbs
CAUTION: If you overload your
furniture, injuries can occur.
Ia (8 + 1 spare)
Short Bolt
Ib (8 + 1 spare)
Medium Bolt
Ic (8 + 1 spare)
Long Bolt
Ottoman: 225 lbs
Ie (8 + 1 spare)
Nut
Id (32)
Metal Washer
If (1)
Allen Wrench
Ig (1)
Hex Wrench
Ih (1 spare)
Glass Bumper
Table: 50 lbs
Do not store anything on glass tabletop. Use furniture covers or store
indoors during cold or inclement weather.

5
Package Contents
Assembly Instructions
A1 Left Arm
A2 Right Arm
B Seat and Back
C Chair Connect Bar
ITEM DESCRIPTION QUANTITY
2
2
2
2
1Attaching the chair connect bar to the arms
Repeat procedure for the other side.
Ia x 4
Short Bolt
Id x 4
Metal Washer
A1
A2
B
C
A1
A2
C
Ia
Id

6
Assembly Instructions
2Attaching the sling seat and back to the arms
Repeat procedure for the other side.
3Attaching the seat and back to the arms
Repeat procedure for the other side.
A2
A1
B
Ib
Id
Id
Ie
Ib x 4
Medium Bolt
Id x 8
Metal Washer
Ie x 4
Nut
A1
A2
B
Ic
Id
Id x 4
Metal Washer
Ic x 4
Long Bolt

7
Assembly Instructions
4Turning the chair over
Securely tighten all bolts and nuts.
Repeat procedure for the other chair.
Package Contents
E TableTop Rim (8 Bolts and 8 Metal Washers attached) 1
F Table Leg (1 Bolt and 1 Metal Washer attached for each) 4
G1 Table Leg Connect Bar (1 Bolt and 1 Metal Washer attached) 1
G2 Table Leg Connect Bar 1
H Glass 1
ITEM DESCRIPTION QUANTITY
H
E
F
F
G2
G1
F
F

Assembly Instructions
8
1Attaching the table connect bar to another table connect bar
Id x 1
Metal Washer
(remove from the table connect bar G1)
Ic x 1
Long Bolt
(remove from the table connect bar G1)
G2
G2
G1
G1
Ic
Id
2 Attaching the leg to the tabletop rim
Ia x 8
Short Bolt
(remove from the table rim)
Id x 8
Metal Washer
(remove from the table rim)
Id
Ia
E
F
Repeat procedure for the remaining 3 legs.

Assembly Instructions
3Attaching one table leg connect bar(G1) to the table legs and then
attaching one table leg connect bar(G2) to the table legs
Ia x 4
Short Bolt
(remove from the table leg)
Id x 4
Metal Washer
(remove from the table leg)
Ia
Id
F
G1
Repeat procedure for the other side.
4
9
FG2
Id Ia
Securely tighten all bolts in a diagonal pattern.
Putting the glass into the table top rim and readjusting level by twisting
knobs on the bottom of legs as desired
H

2
Adjusting the ottoman as required
Assembly Instructions
10
Made in / Hecho en CHINA. Distributed by Kmart Corporation, Hoffman Estates, IL 60179
For questions or comments about product:
Call toll-free: 1-800-457-4652
between 9:00 am to 5:00 pm Eastern standard time Monday through Friday
or contact us at www.numarkcustomerservice.com
Please refer to part numbers when reordering
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Your seating set is now ready for use. Enjoy!
Package Contents
D Ottoman 2
ITEM DESCRIPTION QUANTITY
D
1
DD
D
D
D
123
5
4