JAMES MARTIN VANITIES 388-V72-CFO-A User manual

Version:202003
Made in China
Assembly Instructions
Page 01 of 02
388-V72-CFO-A /388-V72-AGR-A /388-V72-LTO-A /388-V72-GW-A
A=18pcs 4*35
A
Step 1:
Unpack the metal base and shelves from packaging, and place the shelves to the position.
Step 2: Secure the Screws (A) from underneath of frame by using with screw driver.

Version:202003
Made in China
Assembly Instructions
Page 02 of 02
388-V72-CFO-A /388-V72-AGR-A /388-V72-LTO-A /388-V72-GW-A
B=8pcs 1/4*1-1/2
B
C
Note: James Martin recommends a mininum of two people for the assembly.
Step 3:
To attach the metal base, place the vanity cabinet
upside down on a blanket or similar soft material.
Step 4:
Attach the metal base to the bottom of cabinet, use
the Bolts ( B ) to secure by using with Allen Wrench.
Step 5:
After the washbasin has been correctly positioned, insert the Bolts (D)
through the Spring Washer (F) and Flat Washer (E) to access
the vanity cabinet and into the pre-drilled holes, tighten the
bolts using the included Allen Wrench.
D=2pcs 1/4*1-3/4
E=2pcs 1/4 * 16
F=2pcs 1/4
C=1pc 4
E
F
D
C