Janome Quilt Maker Pro 5' Quilting Frame User manual

| 1
Janome Quilt Maker Pro 5’ Quilting Frame
Assembly Instrucons
Table of Contents
Introducon
What’s Included

Frame Parts and Hardware
M6 x 10mm socket cap screw End Caps
QF09318-103
BUNGEE HOLDER BUNGEE HOLDER COVER
QF09318-104
BUNGEE HOLDER SPACER
QF09318-103
RATCHET STOP
QF09318-203
RATCHET STOP HOLDER
QF09318-205
RATCHET STOP BUSHING
QF09318-201
CONNECTOR BOLT
QF09318-204
QF09318-202
RATCHET STOP MOUNT
RAIL BEARING SNAP
QF09318-105
RAIL BEARING SNAP COVER
QF09318-106
Fig. 10-2
QF09318-105
QF09318-703
OUTSIDE POLE END V-GROOVE BEARING
QF09318-705 QF09318-713
HAND WHEEL COLLAR
QF09318-714
STEEL SNAPPING BUTTON/LOCKING CLIP
LEVELING FOOT

| 3
Right Side arm
Left Side arm
Left Side pole clamp
Right Side pole clamp
Side Arm Pole
Corner Connector
L-Bracket
Right Side arm
Left Side arm
Left Side pole clamp
Right Side pole clamp
Side Arm Pole
Corner Connector
L-Bracket
Right Side arm
Left Side arm
Left Side pole clamp
Right Side pole clamp
Side Arm Pole
Corner Connector
L-Bracket
Right Side arm
Left Side arm
Left Side pole clamp
Right Side pole clamp
Side Arm Pole
Corner Connector
L-Bracket
Right Side arm
Left Side arm
Left Side pole clamp
Right Side pole clamp
Side Arm Pole
Corner Connector
L-Bracket
HAND WHEEL ASSY
QF09318-720
SHORT BOLT RATCHET WHEEL
QF09318-730 QF09318-730
LONG BOLT RATCHET WHEEL
HAND WHEEL ASSY
QF09318-720
SHORT BOLT RATCHET WHEEL
QF09318-730 QF09318-730
LONG BOLT RATCHET WHEEL


| 5
Table and Leg Assembly
Parts Needed
Tools Required


NOTE
33”- 34”FLOOR TO QUILT PLANE
34”- 36”FLOOR TO QUILT PLANE
36”- 38”FLOOR TO QUILT PLANE
38”- 40”FLOOR TO QUILT PLANE
41”- 42”FLOOR TO QUILT PLANE
42”- 44”FLOOR TO QUILT PLANE

Side Arm and Pole Assembly
NOTE

NOTE

NOTE
18-inch machines:
16-inch machines:

| 11
C

Set up for an 18-inch machine:
I
G

| 13
Set up for 16-inch machine:
G
C
NOTE

Aligning Track Supports
NOTE
NOTE:
or too close to each other, the machine will rock
when the weight of the machine is all the way
forward or all the way back. e machine wheels
must be seated onto both tracks properly to
prevent this. Start with all of the track screws loose.
Place the machine and carriage over the screw being tight
ened to help keep the tracks the correct distance apart.

| 15
Leveling the Frame
Double Check the Frame Height:
Table of contents
Other Janome Sewing Machine Accessories manuals