Janus V2 User manual

Contents
1. Features and Function
2. Warnings and cautions
3. Product contents
4. Product specification
5. Installation guide
6. Exclusive viewer
7. Firmware upgrade
8. Setup
9. User directions
2page

1. Features and function
Thanks for using JANUS V2 1.0.0 It integrates the vehicle DVR system with leading-edge
technology, GPS to create the new generation vehicle surveillance system.
This state of art system not only records H.264 video and CD quality audio, but also manage
events happening on vehicle.
zNon stop recording
Recording inside and front view while its driving.
Available to manage the recording speed and resolution
Recording speed – Max.50 fps (channel/25fps).
Recording resolution – VGA (640 x 480), CIF (320 x 240)
zEvent archiving
Automatically recording when event occurs.
(Manage the setup: Initially setup: 20 seconds)
Events – Emergency (Emergency button)
Impact/shocking(Physicallyimpact)
Sudden acceleration or brake
Start to recording 2 ~ 5 seconds before and 10 ~ 30 seconds after the event.
zAnalyze live image, audio, speed and location
Easy to find an accident / incident location (e-map) since GPS system is installed.
zNight viewing
IR LED is perfect for the night recording.
(No necessary to turn on the light when it’s recording)
3 page

2. Warnings and Cautions
Do not clean the unit
with water or volatile
solvent.(can be damaged
the product or might
cause of fire or electric
shock
Don’t try to insert or
put unknown
substance into unit.
(Might cause a fire
Or electric shock.)
Do not segregate or open
the unit and remodel it.
(It’s not our responsible
For when unit has
Occurs error since
remodeled by user)
Please adjust the unit
before you drive
the vehicle.
(might be cause
of accident .)
STOP
Take out the
SD memory card
when after turn off
the unit completely
(might cause of
loss of saving)
！
Avoid heavy
sun shade
(Image will be faint
or distorted.)
！
Avoid dust on the
cameras and keep
the unit away from
the direct ray
of light
！
Do not use anymore
！when overheating
or see the smoke
from the unit
4page

3. Product contents
JANUS V2 Power cable/Cigar jack
Emergency
Extension Button Bracket
GPS User Manual and
Install CD
If any of these items is missing or damaged, notify your dealer or installer immediately.
Keep the packing utilities for moving or storage purposes afterwards.
5 page

10
9
11
8
1
2
7
6
3
4
5
1IR LED 7SDHC memory card insert
2CDS sensor 8Monitor connection
3Recording LED 9GPS connection
4GPS LED 10 Channel switch button
5POWER LED 11 Power cable connection
6Emergency Button
6page

4. Product Specification
Contents Specification
Camera 0.3 Mega Pixel CMOS
Lens 175° Wide Lens
Audio Inner MIC
Emergency
Button Internal / External button
Sensor G-Sensor (Outer GPS)
Vibration Sensor installed (Impact detection)
Memory SDHC
Power DC 7 ~ 26V
7 page

Specifications
Camera 2EA CMOS Built-in
Video Input Digital 2ch built-in
Audio Input /Output C- MIC built-in
Video Compression H.264
Audio Compression ADPCM
Recording Resolution VGA 640X480, CIF 320 x 240
Recording Speed Max.50fps (CH/25fps)
Emergency Event Switch Urgent, event detect and recording
Vibration Sensor Impact, event detect and recording
GPS Sensor Over speed, sudden accelerate, detect and recording
Recording Media SDHC memory (Max :32GB, Default 4GB)
Lens Wide angle 175°
IR LED 850n 3PCS with CDS Sensor
Viewer Windows Exclusive viewer
Power Supply DC 7V~26V (enable Car Battery)
Operating Temperature 0°~55°C(maintain temperature: -45° ~ 85°C)
Relative Humidity 10~95% @40°
Weight 150g
Dimension (W x D x H) 65 (W) x 140 (D) x 30(H)mm
8page

5. Installation Guide
1. Please insert SD memory card into
JANUS V2 SD card slut and connect with
bracket.
2. Connect with JANUS V2 ‘Video OUT’ component to display monitor’s
(or Navigation LCD) ‘Video INPUT’ component. (Yellow is video, red is audio)
3. Connect with cigar power cable to JANUS V2 power Component (DC 7~26V) for
operation the unit.
9 page

4. It takes about 15 seconds to booting and after
that beep sounds will be continued.
The images are showing on monitor and it
Starts to recording
(*JANUS V2 initially setup)
5. Please check the images from the monitor and try to find the right place to stick
JANUS V2 on. (Sticker on the back of the bracket is very adhesively.)
6. Connect GPS module to the JANUS V2 and locate the right place in.
(*GPS can be placed in bracket) GPS Module
10page

7. Connect external emergency button to JANUS V2 and locate external emergency button
to near the driver’s seat
11 page

zJANUS V2 Viewer installation guide (Korean and English are provided)
1. Run JANUS V2 EXE file from the Installation CD.
2. Click next for next step..
12page

3. After finish the installation click JANUS V2 Icon on desktop.
4. Put ID and PASSWORD before using.
13 page

6. Exclusive Viewer (JANUS V2 Player)
6
11
7 8 9 10
5
4
3
1 2
1Configuration 7Open file
2Close 8Save Steal shot
3File list 9See E-map
4Play button 10 Volume control
5Auto-meter 11 Channel play mode button
6Speed control bar
14page

6-1. Button Operation
3 4 5
6
2
1
6-1-1. Main buttons (1~5)
1. Open configuration 2. Close
3. Open recorded file 4. Saving steal cut image
5. Open map
(Location coordinates will be shown when you play the file)
6-1-2. Play buttons (6)
Movetofirstdata Play Backward
Pause Play
Movetolastdata PIPfunction
Play 640 x 480 modes each channel
Play 320 x 240 modes With 2 channel
15 page

6-1-3. Play Channel
Play 640 x 480 modes each channel Play 320 x 240 modes with 2 channels
Screen Double Click!!
Channel No. 1 and No. 2 can be showing at the same time
16page

Screen Double Click!!
Screen Double Click!!
When you double click on the image you can see full screen.
17 page

6-2. Play list
List will be shown event by each categories such as ‘Normal’ ‘ Emergency’ ‘Impact’ ‘Over
speed’
Recorded files are marked as year/month/day/hour/minute/second.
18page

6-3. Map Link
See E-map : E-map and location will be provided when click
map button.
Whenever network is connected you can see an e-map
(google map is provided)
19 page

6-4. Configuration
Open Configuration
System.cfg
JANUS V2 Version 1.0.0 must to choose the ‘system cfg’. file in order to open and
change configuration
20page