Jar Furniture MADRID User manual

Assembly Instructions
MADRID
Dining Table

Page 2
2
3
56
Read Instructions carefully.
Lay out all of the components on a soft surface
as if you were preparing to do a jigsaw puzzle.
Carefully identify each component, especially
those that are similar. The most common mistake
is getting things back to front.
Separate and identify each component from the
hardware pack and rest each one in its proper
WARNING
WARNING
Check no parts are missing.
4
fully tighten screws（leave slightly
loose).When the item is fully assembled
tighten the screws - but do not over tighten.
FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE
THAT IS NOT COVERED BY YOUR WARRANTY
If glue is required DO NOT set until you are
certain that the parts belong together.

What you Need
1x Allen Key
(Provided)
1 x Glass Tops
(P1)
4 x Frame Joint
(P2)
2 x Frame
(P3)
2 x Legs
(P4)
1 x Allen
Key (5MM)
1 x Allen
Key (6MM)
2 x long
Screw 8 x Bolts 8 x Bolts 8 x Plastic Stoppers
H1 H2 H3 H4 H5 H6
Please make sure you have all these parts before you start.

Step 1
You will need:
1 x H2
8 x H4
Step 2
You will need:
1 x H1
8 x H5
P4
P2
H2 H4
P3
H5
H1

Step 3
You will need:
8 x H6
Page 5
H6
P1