JARLTECH SERIES 8805 User manual

11/06/2007
JARLTECH
ISO 9001 Certified
Lead with technology
Win customers with service
OPERATION
MANUAL
Touch POS System
SERIES 8805
Verson:1.0

8805Touch POS User’s Manual
Table of Contents:
Chapter 1 Introduction ..................................................................................................2
Chapter 2 Appearance ...................................................................................................4
Chapter 3 Installation ....................................................................................................6
Chapter 4 Commands for Peripheral Controlling.....................................................88
Chapter 5 Hardware Configuration .......................................................................... .91
Chapter 6 Hardware Specification.............................................................................105
Appendix – LAN Controller........................................................................................117
1

8805 Touch POS User’s Manual
Introduction
Preview
Jarltech is defining the New Age of POS with its integrated TouchPOS. The 8805is designed on NB base
with Intel Celeron M processor 1 GHz or above, Two slot of DDR SODIMM memory max up to 2GB; 15”
TFT-LCD with resistive touch screen; built-in VGA, LAN chip, Internal IDE Hard disk (20GB or above).
Thus designation helps user easy and comfortable to handle. Its multi-functional capability makes it
suitable for software developments under Windows XP, XP Embedded, XP professional for Embedded,
WIN 2000 professional Embedded, WIN NT 4.0, Linux, Redhat 7.2, WIN98, ME.
The 8805’s functionality extends far beyond the standard setup. 8805 can be adapted for a variety of uses
with the addition of any of the following options: Magnetic Card Reader,Smart CardReader, 20 x 2 VFD
customer display, the second 10.4" TFT LCD display,cashdrawer, i-Button , Fingerprint ,Wi-Fi ,RFID ,
USB Key-locker or USB devices (all available upon request).
The brand new Touch POS 8805has been designed with all advantages from JARLTECH POS series, but
less cost to customer with its interactive transaction, RFID and smart card reader design provides multiple
clerk access and customer database management, suitable and superior for super-market,hotel,convenience
store,restaurants and any organization or store that needs point of service.
Notes: Must to adjust display setting in BIOS first.
Advanced Chipset Features
On-Chip VGA Setting Boot Display [CRT+LCD]
Panel Type [1024x768 24Bit 1CH]
CHAPTER 1
2

8805Touch POS User’s Manual
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may
cause undesired operation.
CE MARK
This device complies with the requirements of the EEC directive
89/336/EEC with regard to “Electromagnetic compatibility” and
73/23/EEC “Low Voltage Directive”.
CAUTION ON LITHIUM BATTERIES
There is a danger of explosion if the battery is replaced incorrectly. Replace only with
the same or equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
LEGISLATION AND WEEE SYMBOL
2002/96/EC Waste Electrical and Electronic Equipment Directive on the
treatment, collection, recycling and disposal of electric and electronic devices
and their components.
3

8805Touch POS User’s Manual
Appearance
CHAPTER 2
4

8805Touch POS User’s Manual
COM1/COM2: Standard DB9 PIN Serial port
Mouse: PS2 mouse socket
K/B: PS2 Keyboard socket
USB: USB port X 2
VGA: 15 Pins VGAConnector
LAN: Ethernet connector
Multi-Media: Line Out / MIC / Line-In
CD1/CD2: Cash Draw 1(beside S/W) and Cash Draw 2
S/W(Cash Draw controll):Switch button – S/W1 S/W2; ↓= ON, ↑= OFF (Default S/W1=OFF , S/W2=OFF)
Power: Connect to ATX power supply
CAUTION:While installing any additional hardware device, please make sure to
shut down the computer power.
(USB device is not subject to the limits.)
5

8805Touch POS User’s Manual
Driver Installation
Touch Drivers
Insert CD Rom and select "Driver & Manual"folder.
CHAPTER 3
6

8805Touch POS User’s Manual
Select "Touch Driver"folder.
7

8805Touch POS User’s Manual
Access the "Setup".
8

8805Touch POS User’s Manual
When the setup screen appears then to select "Next"step.
9

8805Touch POS User’s Manual
When the setup screen appears then to select "Next"step.
10

8805Touch POS User’s Manual
When the setup screen appears then to select "Next"step.
11

8805Touch POS User’s Manual
When the setup screen appears then to select "Next"step.
12

8805Touch POS User’s Manual
When the setup screen appears then to select "Next"step.
13

8805Touch POS User’s Manual
When the setup screen appears then to select “ YES”.
14

8805Touch POS User’s Manual
When the setup window appear then to select the “Continue Anyway”.
15

8805Touch POS User’s Manual
After installation
System will require reboot
select “ YES”
16

8805Touch POS User’s Manual
When first time complete Touch installation, require processing the cursor accuracy
calibration, Search for the Touchset utility shortcut on the desktop and select
Touchset utility to set up.
17

8805Touch POS User’s Manual
When configuration window appear, select the language which you desire.
(As above selected picture explanation)
18

8805Touch POS User’s Manual
Then to select calibration function and select numbers of calibration point first
(above picture shows select by 4 numbers) next to click on calibrate button.
19