JASSWAY PONTUS User manual

1
POS System Terminal
PONTUS
PRODUCT
MANUAL

2
DEAR
USERNAME
Before using this product, please read this operation manual carefully, and use it correctly on the basis
of a complete understanding of the contents.
Please keep this manual properly for future reference.
PACKAGE CONTENT
Check if all the following items are in the packing box.
1. All in One Computer
2. User Manual
3. Power Adapter
4. Cable
2

ALL IN ONE COMPUTE
R
PRODUCT HANDBOOK
3
IMPORTANT ANNOUNCEMENT
FOR OUR CUSTOMERS
Personal safety is very important when operating and maintaining the all-in-one computer. The manual
includes the warnings and considerations necessary for proper operation.
safe.
Before operating and maintaining the equipment, be sure to fully read and understand all safety warnings
and relevant items.
Do not repair or adjust the equipment yourself. If the fault cannot be resolved with the information
described in this manual, turn off the power supply and remove the plug. Please contact us or our
technical support team for assistance.
ABOUT THE HANDBOOK
The manual serves as an instruction guide for the use of the DIG-150W All-in-One Computer.
SAFETY STATEMENT
The guide and description contained only apply to the All-in-One Computer. No other notice will be
given for changes in equipment content, specifications or manual instructions. No liability will be
assumed for damages caused by direct or indirect errors, omissions or differences. The product
implements GB4943.1 and GB 9254-2008 standards.
WARRANTY STATEMENT
When a repair is made for product failure, please return it to the original factory for repair. Do not
remove, change, install internal components or service the product. If damage and failure occurs due to
disassembly or installation of the product, internal components, and improper use, the warranty will be
voided immediately.
3

ALL IN ONE COMPUTE
R
PRODUCT HANDBOOK
4
USE CONSIDERATIONS
Please read the instructions carefully before using.
- The POS terminal is a grade A product and may cause radio interference in the living environment.
Under such conditions, users should take feasible measures for it.
- Use original or certified parts and peripheral equipment. The use of non-certified peripheral equipment
and parts may cause product failure and damage and result in an invalid warranty.
- The product is used only with the adapter come with the package box. Please confirm whether the
plug voltage is in line with the voltage indicated on the nameplate of the device.
- Do not place the product, power supply, and print paper roll in a place exposed to high temperatures,
humidity, or direct sunlight. Make sure there is enough space around the product.
- Before using the product, please confirm that all joints or equipment are connected
correctly.
- Do not connect the LAN (Local Area Network) cable outside the building to the LAN port of the product.
Be sure to use communication equipment that is in the same building as the device.
- Place the product on a stable horizontal surface to avoid excessive vibrations.
- Place the product in a safe and firm place. Damages and failures caused by improper installation are
not within the scope of the warranty.
- Be sure to turn off the power supply before cleaning and maintaining the product.
- When cleaning the product, use a dry cloth or a cloth moistened with neutral cleaning agents and
wrung out completely. Prohibit the use of thinners or other volatile agents to clean the equipment.
- Please use the attached power cord and power adapter and install it in a place with a good ground
connection of the power supply.
4

ALL IN ONE COMPUTE
R
PRODUCT HANDBOOK
5
- Do not change or damage the power supply equipment or power cord at will to avoid product failure
and danger.
- When the product is turned on, do not use any items to cover the product or the power adapter. Do
not cover or block ventilation.
- Use a separate power outlet.
- Overheating the product or power adapter or electrical overload may cause system failure, damage to
the power adapter, or fire causing serious personal injury.
- The power supply must be turned off before installing or removing interface type equipment [other than
Plug and Play].
- When the following conditions occur, turn off or remove the plug: 1. The
power cord is frayed or abnormal heating.
2. Liquid is splashed on the all-in-one computer.
3. The all-in-one computer is dropped or the case is damaged.
- When the product is not in use, pack it properly and place it in a safe place.
DIMENSION EXTERNA
5

PRODUCT HANDBOOK ALL IN ONE COMPUTER
6
PORTS
INTERFACES DESCRIPTION
DC-IN DC 12V/5A, used to connect power supply
HDMI Used to connect an external monitor
VGA Used to connect an external monitor
COM 1 / COM 2 / COM 3 Puerto Serial RS232
AUDIO Line-out port and microphone-in port
USB Used to connect peripherals (Ej. Keyboard / Mouse)
PUERTO LAN Conector RJ45, Ethernet 100M/1000M

PRODUCT HANDBOOK ALL IN ONE COMPUTER
7
SPECS
8
Specifications
SYSTEM
Processor
Intel Celeron J1900 (2.0 GHz / 2.42GHz) Quad-Core, 2M Cache
Intel Core I3-4030U(1.9GHz), Dual Core, 3M Cache
Intel Core I5-4210U(1.7GHz / 2.7GHz), Dual Core, 3M Cache
Intel Core i3-6006U(2.0GHz), Dual Core, 3M Cache
Intel Core i5-6360U(2.0GHz / 3.1GHz), Dual Core, 4M Cache
Intel Core i5-8257U(3.9GHz / 3.9GHz), Dual Core, 6M Cache
Memory 2GB Standard, DDR3, up to 8GB/16GB
Storage 32GB msata SSD standard, up to 256GB or 500GB sata HDD
OS Windows 7.windows8.1,windows 10,POS Ready7
DISPLAY
Type 15'' TFT LED Backlight
Resolution 1024*768
Touchscreen Projective Capacitive Touch Screen
INTERFACE
Display 1*VGA(J1900), 1*HDMI&1*VGA(i3, i5)
USB 6*USB(J1900), 4*USB(i3, i5)
Serial 2*COM
LAN 1*Gigabit Ehernet, RJ45
Audio 1*Line-out, 1*Mic-in
Power DC-IN Input AC 100~240V/50~60hz, Output DC12V/5A
POWER
Power Supply Adaptor 12V, 5A
OPTIONS & PERIPHERALS
2nd Display 9.7''/15''LCD Display, Touch Screen Optional
Customer Display VFD 220 Customer Display
I/O Expansion 1×RJ11 Cash Drawer Port(Factory Option)
MSR ISO 1,2,3 Tracks(Factory Option)
WIFI Standard 802.11 b/g/n 2.4G single channels(Factory Option)
Bluetooth Bluetooth 4.0(Factory Option)
Wall Mount Kit VESA-Compatible, 75×75(mm)

PRODUCT HANDBOOK ALL IN ONE COMPUTER
8
INSTALLATION PROCEDURE
Attention should be paid to the following considerations when installing the all-in-one computer. Failure
to do so may cause fire, electric shock, or personal injury.
1. When you remove the protective film on the display screen, please make sure the operation is slow.
If the action is too fast, static can be produced, which can damage the display screen.
2. Avoid placing the equipment in the following harsh
environments: 1. direct sunlight / 2. high temperature and high humidity / 3. frequent temperature
change 4. excessive vibration / 5. dirt and smoke
3. Locate the all-in-one computer away from any equipment that emits magnetic fields or electromagnetic
waves.
4. Away from open fire.
5. Ensure that the cash register is placed at a horizontal and stable surface.
SECURITY AREA
Be sure to leave at least 20 cm of space in front, back, left, and right of the all-in-one computer to
dissipate heat and prevent damage from blocked ventilation or obstructed airflow.

PRODUCT HANDBOOK ALL IN ONE COMPUTER
9
PROCEDURE OF
START UP
1. Insert the power cord into the DC-IN port 2. Check
the indicator on the power adapter
Insert the power cord (Insert with the plug
interface surface facing in and make sure the
power cord is well inserted and not loose.)
USE
Before connecting the power cord, make sure it is not powered.
Before operation, please make sure the machine is placed on a horizontal surface to prevent the device from falling.
3. Press the POWER button
4. Click the power button and wait until the boot image
appears.
5.
Shutdown procedure
For Windows: click on the " " icon; in the bottom bar,
select “Shutdown Options” to
"DELETE"
10

10
INSTALLATION
OF SECOND
SCREEN
1. Open the rear cover from below.
2. Fix the second screen with screws
3. Connect the cable to the VGA or COM port *
When the second screen is not displayed, please check the BIOS settings and make sure
that VGA is enabled.