JAYLINE IS500 User manual

1
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Installation Instructions for:
Jayline IS500 with factory ZERO
CLEARANCE CABINET and FLUE KIT
Issued: October 2011 V1.01
Harris Home Fires
41 Braddon St
Addington
Christchurch 8024
New Zealand
Email [e-mail]
Proudly Manufactured By: P O Box 4043
Christchurch 8140
New Zealand
Phone [phone]
Freephone 0800 3661796
Fax [phone]
MODEL AS/NZS
2918:2001
AS/NZ
2918:2001, APP B
AS/NZS
4012:1999
AS/NZS
4013:1999
ECan Cert
Number
IS500 Zero
Clearance
Complies Complies 67% 0.9g/kg 111085
1
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Installation Instructions for:
Jayline IS500 with factory ZERO
CLEARNCE CABINET and FLUE KIT
Issued: October 2011 V1.01
Harris Home Fires
41 Braddon St
Addington
Christchurch 8024
New Zealand
Email [email protected]
Proudly Manufactured By: P O Box 4043
Christchurch 8140
New Zealand
Phone [phone]
Freephone 0800 3661796
Fax [phone]
MODEL AS/NZS
2918:2001
AS/NZ
2918:2001, APP B
AS/NZS
4012:1999
AS/NZS
4013:1999
ECan Cert
Number
IS500 Zero
Clearance
Complies Complies 67% 0.9g/kg 111085

2
These instructions should be read in conjunction with the
relevant IS500 details in the full Jayline installation and
operating manual supplied with the fire
Following these instructions allows for the IS500 to be safely
installed in a timber frame wall, without the need for further heat
protection beyond that supplied as part of the cabinet and flue
system.
WARNING: It is critical that these instructions are followed fully and
that no substitute parts are used.
For floor protector and mantle extension details, refer to the full
manual, for approved clearances.
INSTALLATION NOTES
1. IS500 zero clearance cabinet is approved to sit directly into a
timber frame.
2. Combustible materials can be in contact with the 25mm standoffs
fitted to the outside of the cabinet, but we recommend an
additional clearance of25mm beyond the standoffs for ease of
moving into position without becoming jammed in the wall cavity
provided for the appliance.
3. Timber framing can be in contact with the 250mm diameter outer
casing where the 200mm diameter inner casing is at the height
also.
4. Timber framing must be 25mm clear of the 250mm diameter
outer casing if the 200mm diameter inner casing is not present
at that height.
5. The floor protector extension in front of the door shall be a
minimum of 8mm ceramic tiles if the floor is a heat sensitive
material.

3
Seismic Restraint

4
Seismic Restraint

5
50 x 25 Packer