
When the OnBeat Venue
LT
is
in
the standby mode it will automatically turn on when it
detects audio playing from a 8/uetooth-connected device or from a docked device.
When the OnBeat Venue
LT
is
on, it will automatically enter the standby mode after 10
minutes of inactivity (no audio input and no user-control operation).
Note: When the OnBeat Venue
LT
enters the standby mode it will also bring a docked
device into standby mode.
Volume
Up/Down
buttons: Press these buttons to raise and lowerthe
On
Beat Venue
LT's
volume.
To
mute the sound, press both buttons at the same time.
(The
Power button
LED
will flash white when the sound
is
muted.)
To
restore the sound press either Volume button
or both buttons together.
Docking slide: Press
in
on
the
JBL
logo to open the docking slide and pull the slide
all
the way open.
Docking connector: Place your device onto the docking slide so that it
is
firmly seated
on the docking connector.
Made for
iPhone 5
iPod nano 7th generation
0
....------
iPod touch 5th
generat~n
l +
Note:
We
recommend that you disable the"Shake to Shuffle" feature on your iPod nano,
iPod touch and iPhone before docking the device on the OnBeat Venue
LT.
BLUETOOTH WIRELESS STREAMING
To
wirelessly stream audio to the OnBeat Venue
LT
from a 8/uetooth-enabled device:
1.
If the OnBeat Venue
LT's
8/uetooth
LED
is
not flashing blue, press the Source button
until the 8/uetooth
LED
begins flashing blue.
2.
Place the 8/uetooth-capable device
in
the pairing mode. Use the device's 8/uetooth
pairing menu to pair with
On
Beat Venue
LT.
(If
the device requires a pairing code, use
0000.)
3.
When OnBeat Venue
LT's
8/uetooth
LED
illuminates blue continually, it
is
paired with
the device and you can stream audio via 8/uetooth from the device to the OnBeat
Venue
LT.
To
disconnect the 8/uetooth device, press and hold the Source button.
To
pair OnBeat
Venue
LT
with a different 8/uetooth-enabled device, repeat Steps 2 and 3 with the new device.
www.jbl.com 3