JCM Technologies KEEpush User manual

Description
3-channel motion transmitter; 3 different functions (open door, switch on courtesy light, ...)
Installation
Remove plastic from batteries
Slide on wall support
Fix support
Screw back cover
Fix device (use provided tool)
Do not install near
of radiofrequency
emitting equipment
(it could decrease
the life of the
batteries)
EN
KEEpush
• MOTION keyboard, 3 channels 868 MHz •
• IP65 · 3 batteries AAA 1,5V •
• Autonomy: 2 years/6000 activations •
-20 / +55 ºC
quick guide
INSTALLER
jcmtechnologies
Motion radio wall transmitter with visual
interaction and INSTALL&GO installing system
Programming
Enter programming mode
in receiver Wake up Push the button (channel) to
be programmed

Check our website for troubleshooting: https://www.jcm-tech.com/JCM/keepad-keepush/
EN
KEEpush
• MOTION keyboard, 3 channels 868 MHz •
• IP65 · 3 batteries AAA 1,5V •
• Autonomy: 2 years/6000 activations •
-20 / +55 ºC
quick guide
USER
jcmtechnologies
Motion radio wall transmitter with visual
interaction and INSTALL&GO installing system
jcmtechnologies
EU Declaration of conformity
Troubleshooting
The manufacturer JCM TECHNOLOGIES declares that the product KEEPUSH complies with the relevant
fundamental requirements of the RED Directive 2014/53/EU and of the RoHS Directive 2011/65/EU.
JCM TECHNOLOGIES, SA · COSTA D’EN PARATGE, 6B - 08500 VIC (BARCELONA) SPAIN
See web page: www.jcm-tech.com/en/declarations
QG_3200917_KEEpush_EN_Rev03
Normal use
Select the channel
Wake up the device
Unscrew device and
slide up
Battery change
Change the batteries
(3 x 1.5Vdc type AAA)
Unscrew back cover