Jefferson NEMESIS JEFAXNEM03-HL User manual

www.jeffersontools.com
USER MANUAL v.1.1
JEFAXNEM03-HL
WARNING!
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
Failure to follow the safety rules and other basic safety precautions may result in serious personal injury

www.jeffersontools.com2
Technical Specifications
Safety
ITEM CAPACITY LIFTING RANGE MIN LIFTING RANGE MAX LIFTING RANGE MIN
(mm)
LIFTING RANGE MAX
(mm)
JEFAXNEM03-HL 3 TONNE 17-5/16 28-3/8 440 720
– Study, understand, and follow all instructions before operating this device.
– Do not exceed rated capacity.
– Use only on hard, level surfaces, with less than 3 degrees of slope.
– Center load on saddle.
– Use as a matched pair only.
– Stands are not to be used to simultaneously support both ends of a vehicle.
– No alterations shall be made to this product.
– Support only on areas of the vehicle as specied by the vehicle manufacturer.
– Only attachments and/or adapters supplied by the manufacturer shall be used.
– Use wheel chocks or other blocking device on opposing wheels before using jack stands.
– Do not use jack stands for any use other than the manufacturer specied usage.
– Do not use if damaged in any way.
– Never use jack stands on a lawn mower or lawn tractor.
– Do not move or dolly the vehicle while on support stands.
– Do not rock the vehicle while working on or around equipment.
– The following are not recommended for supporting on this equipment:
Foundations, homes, mobile homes, trailers, rv’s, campers, nor fth wheels, etc.
– Failure to heed these instructions may result in personal injury and/or property damage.
WARRANTY NOTICE
This equipment is covered under a 1-year limited warranty when used as recommended.
For assistance with the operation or the availability of replacement parts, contact our Parts and Warranty
Department at [email protected]. Please have available a copy of your receipt, the model number
of the product, serial number, and specic details regarding your question.
Not all equipment components are available for replacement; illustrations provided are a convenient reference
of location and position in the assembly sequence. The manufacturer reserves the rights to make design
changes and or improvements to product lines and manuals without notice.
WARRANTY INFORMATION
We want to know If you have any concerns with our products. For additional web customer support
help inquiries contact the Customer Service :[email protected].

www.jeffersontools.com 3
Preparation
Assembly Instructions
1 2 3
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and diagram below. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service. [e-mail]
BEFORE USE
– Inspect stands before each use. Do not use if components are bent, broken or cracked. Ensure that all
parts move freely.
– Verify that the product and the application are compatible. If in doubt, contact customer support.
– Before using this product, read the owner’s manual and familiarise yourself thoroughly with the product
and the hazards associated with its improper use.
– Always check the vehicle owners or service manual for location of proper lift and support points.
CARE AND MAINTENANCE
Periodically inspect each stand. Ensure all parts move freely. Do not apply oil or grease to any portion of
this product. If rust appears, sand affected area and cover with suitable utility paint. Please note that there
is no replacement part applicable to this device.
STORAGE
Store stands in upright position and in a clean, dry area.
USER MANUAL v.1.1
JEFAXNEM03-HL

www.jeffersontools.com4
Parts List
REF DESCRIPTION QTY
1 Height adjustment extension tube 1
2 Axle stand base 1
3 Pin 1

www.jeffersontools.com 5
TUV CERTIFICATE
EK5/AK6 18-03 :2018 AfPS GS 2019 :01 PAK
Signed by: Stephen McIntyre
29 June 2023
TUV Rheinland LGA Products
GMBH, Tillystrabe 2,
90431, Nurnberg
Germany
Operations Manager
NEMENSIS SUPPORT STAND
JEFAXNEM03-HL
Notied Body:
Product Name:
Name and address of manufacturer or
authorised representative
Declaration of Conformity.
We, Jefferson Professional Tools & Equipment, as the authorised European Community representative of
the manufacturer, declare that the following equipment conforms to the requirements of the following:
Jefferson Professional Tools & Equipment
24 Lisgorgan Lane, Upperlands, BT46 5TE
Tel: [phone] (UK)
[phone] (ROI)
Email: [email protected]
USER MANUAL v.1.1
JEFAXNEM03-HL

www.jeffersontools.com6
Nemesis Range
NEMESIS
2.25 Tonne Trolley Jack
NEMESIS
4 Tonne Trolley Jack
NEMESIS
2 Tonne Farm Jack
NEMESIS
3 / 6 Tonne Axle Stands
NEMESIS
Wheel Dolly
NEMESIS
3 Tonne Trolley Jack

www.jeffersontools.com 7
NEMESIS
2 Tonne Farm Jack
NEMESIS
Wheel Dolly
USER MANUAL v.1.1
JEFAXNEM03-HL

8 www.jeffersontools.com
Jefferson Tools, 24 Lisgorgan Lane, Upperlands, BT46 5TE,
Telephone: [phone] (ROI) [phone] Email: [email protected]
IMPORTANT! SAFETY FIRST!
Before attempting to use this product please read
all the safety precautions and operating instructions
outlined in this manual to reduce the risk of fire,
electric shock or personal injury.
USER MANUAL v.1.1
JEFAXNEM03-HL