Total Source HFTE0007 User manual

OPERATING MANUAL
ELECTRIC LIFT TABLE
HFTE0007  HFTE0033
Original operating
manual
12/2021– V01
from serial n°
M202007152

2/36
© 12-2021. TVH
®
and TotalSource
®
are registered trademarks. TVH Parts Holding NV, Brabantstraat 15, B-8790 Waregem. All rights reserved.
No part of this publication may be reproduced or communicated in any form or by any means, electronic or mechanical, including copying,
recording or use in an information storage or retrieval system, without prior and explicit permission of TVH Parts Holding NV. Printing errors
reserved. Photographs and illustrations are included for reference purposes only. Photographs and illustrations are included for reference
purposes only.
Responsible editor: TVH Parts Holding NV, Brabantstraat 15, BE-8790 Waregem
TVH is a supplier of after-market spare parts and accessories that are suitable for the maintenance and repair of OEM equipment.

3/36
https://www.tvh.com/hfte0007-hfte0033-rv01
BG Bulgarian Можете да намерите това ръководство на Вашия език чрез линка, посочен по–
долу.
CS Czech Tento návod najdete ve svém jazyce prostřednictvím odkazu níže.
DA Danish Du kan finde denne vejledning på dit sprog via nedenstående link.
DE German Sie finden diese Bedienungsanleitung in Ihrer Sprache unter folgendem Link.
EL Greek Μπορείτε να βρείτε αυτό το εγχειρίδιο στη γλώσσα σας έσω του παρακάτω
συνδέσου.
EN English You can find this manual in your language via below link.
ES Spanish Encontrarás este manual en su propio idioma a través del siguiente enlace.
ET Estonian Oma emakeelse juhendi leiate allolevalt lingilt.
FI Finnish Löydät tämän manuaalin omalla kielelläsi alla olevan linkin takaa.
FR French Vous trouverez ce manuel dans votre langue via le lien ci-dessous.
GA Irish Tá an lámhleabhar seo ar fáil i do theanga tríd an nasc thíos.
HR Croatian Ovaj prirucnik mozete pronaci na svom jeziku putem donjeg linka.
HU Hungarian Ez a kézikönyv az Ön nyelvén az alábbi link alatt található.
IS Icelandic Hægt er að finna þessa handbók á þínu tungumáli á tenglinum hér að neðan.
IT Italian Cliccando sul link sottostante troverai il manuale nella tua lingua.
LT Lithuanian Šį vadovlėlį savo kalba rasite spustelėję žemiau esančią nuorodą.
LV Latvian Rokasgrāmatu latviešu valodā Jūs varat atrast izmantojot zemāk esošo saiti.
MT Maltese Tista’ ssib dan il-manwal bil-lingwa tiegħek permezz tal-link ta’ hawn taħt.
NL Dutch Je vindt deze handleiding in jouw taal via onderstaande link.
NO Norwegian Du finner denne håndboken på ditt språk via linken nedenfor.
PL Polish Niniejsza instrukcja obsługi dostępna jest w Twoim języku za pośrednictwem
poniższego linku.
PT Portuguese Pode encontrar este manual no seu idioma através do link abaixo.
RO Romanian Putei găsi acest manual în limba dvs. prin link-ul de mai jos.
SK Slovak Manuál vo vašom jazyku môžete nájst v priloženom vysvietenom riadku.
SL Slovenian Ta priročnik najdete v svojem jeziku preko spodnje povezave.
SV Swedish Du kan hitta denna manual på ditt språk via länken nedan.
TR Turkish Bu kılavuzu aşağıdaki bağlantıdan kendi dilinizde bulabilirsiniz.

4/36
Thank you for using our product. For your safety and to ensure a correct operation, we would
like to bring to your attention some aspects of this manual:
• This booklet supplies useful instructions for the correct operation and maintenance of the
product. It is therefore necessary to pay the utmost attention to all of the paragraphs that
illustrate the most simple and secure way to operate and use this product.
• This booklet must be considered an integral part of the product and must be included with
the deed of sale.
• Neither this publication, nor part of it, can be reproduced without written authorisation on
the part of the manufacturer.
• All of the information reported herein is based on data available at the moment of printing;
the manufacturer reserves the right to carry out modifications to its own products at any
moment, without notice and without incurring in any sanction. It is therefore suggested to
always check for possible updates.
The person responsible for the use of the product must make sure that all of the safety rules
in force in the country of its use are applied, to guarantee that the equipment is used in
conformity with the use for which it is destined and to avoid any dangerous situation for the
user.
The following warning signs are used in this manual to warn you for dangers and risks:
Informative, be careful.
Warning, can lead to injury and damage if instructions aren’t followed.
Danger, can lead to serious or fatal injury and serious damage if instructions
aren’t followed.
The following conventions are used in this manual:
1 Right
2 Left
3Front
4 Back
5Top
6 Bottom
5
2
6
1
4
3

5/36
TABLE OF CONTENTS
1. INTRODUCTION..................................................................................... 7
2. DESCRIPTION....................................................................................... 8
2.1. Technical data .......................................................................................8
2.2. Main components of the product................................................................11
2.3. Placement of the decals..........................................................................11
2.4. Type plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3. SAFETY INSTRUCTIONS.........................................................................13
3.1. Explanation of the safety decals ................................................................13
3.2. General safety instructions ......................................................................14
4. TRANSPORT AND STORAGE ....................................................................15
5. ASSEMBLY AND INSTALLATION ...............................................................17
5.1. Packing list..........................................................................................17
5.2. Safety instructions for assembly and installation of the product .........................17
5.3. Required materials for assembly ...............................................................17
5.4. Assembly of the product..........................................................................17
5.5. Installation of the product (models HFTE0007– HFTE0033)...............................17
6. OPERATION.........................................................................................19
6.1. Safety instructions for operating the product ................................................19
6.2. Operating instructions ............................................................................20
7. MAINTENANCE ....................................................................................23
7.1. Safety instructions for the repair of the product .............................................23
7.2. Maintenance schedule............................................................................23
7.3. Maintenance instructions ........................................................................24
8. TROUBLESHOOTING .............................................................................27
9. FINAL DECOMMISSIONING AND DISPOSAL ................................................29
10. ANNEXES ...........................................................................................30
10.1. CEcertificate .......................................................................................30
10.2. Electrical system...................................................................................32
10.3. Hydraulic system ..................................................................................33

6/36
1. INTRODUCTION
This lift table is an electrically operated lift table. It is designed to lift and lower loads.
Thelift table should be used on hard and even surfaces, indoor and in dry conditions.
Suitable ambient temperature is −15°C up to 60°C.
We guarantee a long period of trouble free operation if the unit is operated and maintained
correctly.
This lift table may be unsafe/hazardous if adequate maintenance is neglected.
Therefore, adequate maintenance facilities, trained personnel and procedures
should be provided.
Maintenance and inspection shall be performed in conformity with the following
practices:
1. A scheduled planned maintenance, lubrication and inspection system should be
followed (see maintenance instructions in chapter7).
2. Only qualified and authorised personnel shall be permitted to maintain, repair,
adjust, and inspect the lift table.
3. Modifications and additions which affect capacity and safe operation shall not
be performed by the customer or user without the manufacturer’s prior written
approval. Capacity, operation and maintenance plates or decals shall be changed
accordingly.
4. If modifications are made without the written approval of the manufacturer,
thewarranty will no longer apply.
This manual contains all the necessary information on the installation and operation of
the electric lifting table. Some of the maintenance operations should only be carried out
by professional technicians. If you require this information and the maintenance steps,
pleasecontact your dealer.

7/36
2. DESCRIPTION
2.1. Technical data
Always check the type plate for the correct information.
Single scissor
Type HFTE0007 HFTE0008 HFTE0009 HFTE0010 HFTE0011
Load capacity (kg) 1000 1000 1000 1000 1000
Maximum height (mm) (H2) 1000 1000 1300 1300 1300
Minimum height (mm) (H3) 205 205 240 240 240
Length of the platform (L2) (mm) 1300 1600 1700 1700 2000
Width of the platform (W2) (mm) 820 1000 850 1000 850
Material of the lift table Steel Steel Steel Steel Steel
Voltage (V) - phase 380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
Weight (kg) 160 186 200 210 212
Power (kW) 1,1 1,1 1,1 1,1 1,1
International protection marking IP54 IP54 IP54 IP54 IP54
Type HFTE0012 HFTE0013 HFTE0014 HFTE0015 HFTE0016
Load capacity (kg) 1000 2000 2000 2000 2000
Maximum height (mm) (H2) 1300 1050 1050 1300 1300
Minimum height (mm) (H3) 240 230 230 250 250
Length of the platform (L2) (mm) 2000 1300 1600 1700 1700
Width of the platform (W2) (mm) 1000 850 1000 850 1000
Material of the lift table Steel Steel Steel Steel Steel
Voltage (V) - phase 380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
Weight (kg) 223 235 268 289 300
Power (kW) 1,1 2,2 2,2 2,2 2,2
International protection marking IP54 IP54 IP54 IP54 IP54
Type HFTE0017 HFTE0018 HFTE0019 HFTE0020 HFTE0021
Load capacity (kg) 2000 2000 4000 4000 4000
Maximum height (mm) (H2) 1300 1300 1100 1100 1400
Minimum height (mm) (H3) 250 250 240 240 300
Length of the platform (L2) (mm) 2000 2000 1700 2000 2000
Width of the platform (W2) (mm) 850 1000 2000 1200 1000
Material of the lift table Steel Steel Steel Steel Steel
Voltage (V) - phase 380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
Weight (kg) 300 315 375 405 470
Power (kW) 2,2 2,2 2,2 2,2 2,2
International protection marking IP54 IP54 IP54 IP54 IP54

8/36
Type HFTE0022 HFTE0023 HFTE0024 HFTE0025 HFTE0026
Load capacity (kg) 4000 4000 4000 4000 4000
Maximum height (mm) (H2) 1400 1400 1400 1400 1400
Minimum height (mm) (H3) 300 300 300 300 300
Length of the platform (L2) (mm) 2000 2200 2200 1700 2200
Width of the platform (W2) (mm) 1200 1000 1200 1500 1800
Material of the lift table Steel Steel Steel Steel Steel
Voltage (V) - phase 380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
380 - 3
phase
Weight (kg) 490 480 505 420 540
Power (kW) 2,2 2,2 2,2 2,2 2,2
International protection marking IP54 IP54 IP54 IP54 IP54
Double scissor
Type HFTE0027 HFTE0028 HFTE0029
Load capacity (kg) 1000 2000 4000
Maximum height (mm) (H2) 1780 1780 2050
Minimum height (mm) (H3) 305 360 400
Length of the platform (L2) (mm) 1300 1300 1200
Width of the platform (W2) (mm) 820 850 1700
Material of the lift table Steel Steel Steel
Voltage (V) - phase 380 - 3
phase
380 - 3
phase
380 - 3
phase
Weight (kg) 210 295 520
Power (kW) 2,2 2,2 2,2
International protection marking IP54 IP54 IP54
Triple scissor
Type HFTE0030 HFTE0031
Load capacity (kg) 1000 2000
Maximum height (mm) (H2) 3000 3000
Minimum height (mm) (H3) 470 560
Length of the platform (L2) (mm) 1000 1000
Width of the platform (W2) (mm) 1700 1700
Material of the lift table Steel Steel
Voltage (V) - phase 380 - 3
phase
380 - 3
phase
Weight (kg) 450 560
Power (kW) 2,2 2,2
International protection marking IP54 IP54

9/36
Quadruple scissor
Type HFTE0032 HFTE0033
Load capacity (kg) 400 800
Maximum height (mm) (H2) 4140 4210
Minimum height (mm) (H3) 600 706
Length of the platform (L2) (mm) 1000 1000
Width of the platform (W2) (mm) 1700 1700
Material of the lift table Steel Steel
Voltage (V) - phase 380 - 3
phase
380 - 3
phase
Weight (kg) 548 858
Power (kW) 2,2 2,2
International protection marking IP54 IP54
L2
H2
H3
W2

10/36
2.2. Main components of the product
N° Component
1 Platform
2Remote controller
3Anti-crush system
4 Motor
5Electric plug
6Fixed side
7Scissor mechanism
8Oil reservoir
9Safety mechanism
10 Rollers/moving side
11 Hydraulic pump
12 Holes for ring bolts
13 Lowering switch
14 Lifting switch
15 Emergency switch
2.3. Placement of the decals
The safety and warning labels should be placed as described in the pictures below.
Seechapter3 for the explanation of the safety warnings. If the decals are damaged or
missing, replace them.
N° Decal Explanation Reference
1Brand decal 166TA2311

11/36
2.4. Type plate
N° Type plate Explanation
2
Type lifting table
Manufactured outside the EU for:
TVH PARTS NV
Brabantstraat 15 • 8790 Waregem • Belgium
xxxxxx Lifting height xxx mm
Serial n° xxxxxx Length of the platform xxx mm
Capacity xxx kg Width of the platform xxx mm
Net weight xxx kg Year of manufacturing xxxx
1 6
7
8
9
10
2
3
4
5
1Type of lift table
2Serial number
3Capacity of the lift table
4Weight of the lift table
5Name and address of the
manufacturer
6Lifting height
7Length of the platform
8Width of the platform
9Year of manufacture
10 CE logo

12/36
3. SAFETY INSTRUCTIONS
3.1. Explanation of the safety decals
If the decals are damaged or missing, please replace them.
N° Decal Explanation Reference
3Maximum load capacity:1000kg 166TA7294
Maximum load capacity: 400kg 166TA7575
Maximum load capacity: 800kg 166TA7576
Maximum load capacity: 2000kg 166TA7295
Maximum load capacity: 4000kg 166TA7296
4Indication placement of the lifting hooks 166TA7299
5
1 2 3 4 5
Safety instruction:
1. Read the manual before use
2. Do not insert feet or hands in the scissor
mechanism
3. Always use supports to secure the lift table
and to prevent unexpected movements
4. It is forbidden to carry or lift passengers
5. Stand clear when the lift table is moving
166TA7300

13/36
3.2. General safety instructions
• The operator should read all warning signs and instructions in the manual and on
the lift table before using it.
• Do not operate a lift table unless you have been trained or authorised to do so.
• Do not exceed the maximum capacity.
• The operator should wear safety shoes and gloves when using or maintaining the
lifting table.
• It is forbidden to carry or lift passengers.
• The lift table can’t be used if it’s damaged or when faults appear.
• Do not use the lift table on a slope. It is designed to be used on even and level
floors.
• Be aware of hazardous situations like ledges or potholes, bumps and floor
obstructions, debris, overhead obstructions and high-voltage conductors,
inadequate surface support to withstand all load forces imposed by the product.
• Check if the local voltage and frequency is the same as the input specification of
the lift table.
• All the electrical connection and disconnection operations must be carried out by
skilled and competent personnel.
• Do not use the lift table in an explosive or flammable environment.
• Do not operate the product unless you are of age.
• The person responsible for the use of the product must make sure that all of the
safety rules in force in the country of its use are applied, to guarantee that the
equipment is used in conformity with the use for which it is destined and to avoid
any dangerous situation for the user.
TVH Parts Holding NV cannot envisage each possible circumstance that may result
in danger. Therefore the warnings given in this publication and which appear on
the equipment are not exhaustive. In the event that equipment, procedures, work
methods or working techniques are used that are not specifically advised by the TVH
company, it is necessary to make sure that there is no danger to the operator or other
people.
The lift table is equipped with a pressure valve and an overflow valve:
• The pressure valve on the machine is factory-set for the maximum load capacity of
400 / 800 / 1000 / 2000 / 4000kg or according to the capacity mentioned on the lift
table.
• The pressure relief valve is set to avoid the risk of overloading. When the machine
is overloaded, the overflow valve opens to prevent lifting, because that could result
in a dangerous situation.

14/36
4. TRANSPORT AND STORAGE
The lift table must be lowered completely when it is not in use. When not in use, the lift table
can be stored horizontally on a pallet. To do this, follow the next steps:
1Bring the lift table to the lowest position.
2Disconnect the electric plug.
3Attach the ring bolts to the lift table.
4Attach lifting chains to the ring bolts.
5Lift up the lift table using a lift truck.
6Place the lift table onto a pallet.
7Secure the lift table to the pallet.

15/36
8Move the pallet with a pallet truck or lift
truck.
The lift table must always be stored in a dry environment. If the lift table will be stored for
more than one month, lubricate all necessary parts (see chapter7).
If necessary, the lift table can be transported with a lift truck using the attached ring
bolts, or on a pallet. Pay attention to the maximum capacity of the lifting equipment
used. Theweight of the lift table can be found on the type plate. The lift table must be
empty when transporting it.

16/36
5. ASSEMBLY AND INSTALLATION
5.1. Packing list
Description Amount Reference
Ring bolts 4 Contact
your dealer
Lift table 1 Contact
your dealer
Operating manual 1 167TA4029
Spare parts list HFTE0007 - HFTE0012 1 166TA8809
Spare parts list HFTE0013 - HFTE0018 1 166TA8810
Spare parts list HFTE0019 - HFTE0026 1 166TA8811
5.2. Safety instructions for assembly and installation of the product
• Double or triple scissor electric lift tables must be fixed to the floor or ground with
expander bolts or similar. This to prevent unintentional movements.
• Do not use the lift table on a slope. It is designed to be used on even and level
floors.
• Make sure that the flooring can support the lift table and its capacity.
• The operator should wear safety shoes and gloves when using or maintaining the
lifting table.
• Pay attention not to deform the frame or platform. The lift table can be moved with
a lift truck using slings attached to the ring bolts.
• Do not install the lift table in an area where flammable gases can be present.
• Be careful when unpacking the lift table so as not to damage the product.
• Carefully read the manuals of the lift truck and drill before using this equipment.
5.3. Required materials for assembly
• A drill and bits to drill the holes for installing the lift table onto the floor. Depending on the
type of floor, choose the most appropriate equipment.
• A lift truck to safely move the lift table.
• Expansion screws, depending on the type of floor, choose the most appropriate bolts.
5.4. Assembly of the product
For the electric lift table, there is no assembly necessary. Safely remove the packaging and
the product is ready to use.
To secure the lift table to the ground or to install it into a pit, carefully read the next topic.
5.5. Installation of the product (models HFTE0007– HFTE0033)
If the lift table is going to be installed in a pit, these are the requirements for the pit:
• Pit length: length of the platform+ 30mm
• Pit width: width of the platform+ 30mm
• Pit depth: minimum height+ 5mm

17/36
Make sure the pit is clean and there is no water or other fluids in it that can damage
the electrical system of the lift table.
Make sure that the flooring is flat and that it can support the lift table and its capacity.
To attach the lift table to the ground, follow the next steps:
1Mark the location of the pre-drilled mounting
holes on the floor.
2Drill holes in the floor so that the lift table
can be anchored to the floor.
3Attach the ring bolts to the lift table.
4Attach lifting chains to the ring bolts.
5Position the lift table into its desired position.
Make sure that it is positioned with the fixed
arm to the side where the load will be loaded
onto the lift table.
6Connect the power supply.
7Test the lift table to make sure it functions
properly. See chapter6 for operating
instructions. If the lift table doesn’t function
properly, see chapter8 for troubleshooting.
8Anchor the lift table to the floor with
expansion bolts or similar.
Fixed side Moving side

18/36
6. OPERATION
6.1. Safety instructions for operating the product
• A damaged or malfunctioning product must never be used. If damage or
malfunctions are discovered during pre-operation inspection or function tests,
theproduct must be tagged and removed from service.
• The operator may not wear any loose objects, such as necklaces, rings, scarves…
as they may become entangled in the product and thus cause harm to the operator.
• Do not operate a lift table unless you have been trained or authorised to do so.
• Always shut down the power when leaving the lift table unattended.
• Do not exceed the maximum load capacity.
• Do not insert feet or hands in the scissor mechanism.
• Do not lower the table too fast. The load could fall down and create a dangerous
situation.
• Keep watching the condition of the load. Stop operating the lift table if the load
becomes unstable.
• The weight of the goods should be distributed equally over the platform. You can
use full capacity when the load is uniformely distributed over the entire platform
(figI). 50% of the capacity can ben used when the load is uniformely distributed
over half the length of the platform (figII), 33% of the capacity can be used when
the load is uniformely distributed over the half the width of the platform (figIII).
• Be careful not to put too much pressure from above on the lift table. This can occur
when pressing load on the lift table with for example a lift truck.
• Do not lift people on the lift table.
• Check for obstructions when raising or lowering the lift table.
• Do not use the lift table on a slope. It is designed to be used on even and level
floors.
• When goods are being transported or lifted, bystanders should keep a minimum
distance of 1metre.
• The operator should wear safety shoes and gloves when using or maintaining the
lifting table.
• In normal conditions the lifting table moves without a lot of noises.
• If the lifting table doesn’t lift, it may be overloaded, check the troubleshooting
guide in chapter8.
• If the lifting table descend automatically, check the troubleshooting guide in
chapter8.

19/36
6.2. Operating instructions
Please see chapter7 for the daily maintenance schedule.
N° Component
1Lowering switch
2Lifting switch
3Emergency switch
1. Lifting button
When pressing this button, the lift table will lift until you release the button.
2. Lowering button
When pressing this button, the lift table will lower until you release the button.
3. Emergency switch
When you press this button, it will switch off the power and stops the lift table, when you
turn the button clockwise, it will switch the power back on. In case of problems and danger,
it is important to activate the emergency stop immediately in order to avoid further injury or
damage. Examples of danger can be smoke, fire, sparks, entrapment of limbs, trapping of
items of clothing, etc.
4. Anti-crush system
If the anti-crush system strikes an object while the table lowers, the operation will be
stopped. After making sure there are no dangers, push the lifting button and the system will
function as before.
The anti-crush system also functions as the emergency stop when it’s striked upward the lift
table will stop working.
1
2
3

20/36
5. Loading and unloading the lifting table
1Check if the load capacity of the lifting table
is sufficient for the load you want to lift .
2Lift or lower the lifting table to the desired
position by using the lifting button or
lowering button.
3Load the load to the lifting table, be careful
not to put too much pressure from above on
the lift table. The weight of the load should be
distributed equally over the platform.
4Make sure the load is stable on the lifting
table.
5Make sure bystanders stay at a safe distance
of 1metre.
6By using the lifting or lowering button you
can lift/lower the lift table to the desired
position.